hello guys
cant find the ssl84d for my sim2.10 from where to download it i think i lost it or deleted it by mistake
1. Turn off the decoder from the switch on the back, in the absence of the latter, unplug the power cable from your Dreambox.
2. Press and hold the power button on the front panel of your decoder and turn the decoder back on.
3. Always keep the power button on the front panel pressed until *** STOP *** appears on the display together with the IP address of the decoder (eg 192.168.1.33).
4. Open your computer browser and enter the above IP address to access the firmware installation page.
5. At this point click on Firmware upgrade.
6. Send first the ssl (secondstage) then without closing, go back, and select the firmware to install, once selected click on the Flash button! to proceed with the installation of the new firmware. as soon as finished, do not reboot, and go back
all of this i understand it but the problem i have is what to do here as soon as finished, do not reboot, and go back
i know how to enter the firmware installation page i know if i have the file of the ssl i need to flash that first and do just go open new windows and enter the ip again or go back ... and i know that i need to flash the image ...... but after i flash the image do i REBOOT or will i get my clone BRICKD : )
i do not understand this last words as soon as finished, do not reboot, and go back = where to go back how will i start the box if i do not restart the box...
i understand the need of me to flash the ssl first then without restarting go back and flash the image but after that ..... i do not understand how i will boot the receiver...