Ncam Emu by RAED

There are 1,955 replies in this Thread which was already clicked 737,817 times. The last Post () by joaoccbernardo.

    my bad master G i forgot on that i just found some older version of the ncam and it worked on the 2 other recivers.

    but next time i will post the error.


    enigma2-plugin-softcams-ncam-mips_V10.8-r0_all

    enigma2-plugin-softcams-ncam_V11.3-r0_all - i tryed this 1 and it worked on the openpli 8.0 version and and on openpli 8.2 version


    enigma2-plugin-softcams-ncam-mips_V10.8-r0_all.ipk enigma2-plugin-softcams-ncam_V11.3-r0_all.ipk


    i upload them so if someone have same problem to resolve it fast because i forgot to post errors

    fairbird


    There is a major bug in NCam.

    constant.cw and SoftCam.Key is empty but I get ..

    Code
    2022-09-07 19:33:35 19005426 c      (ecm) dvbapiau (P: 2600::0001:1FFF:0000 #ECM_L:19 #CW=65AADCEB5554CC7565AADCEB5554CC75 HOP:00): found (1 ms) by linuxsat-support.com (L/2/3/3) - PROGRAMME NATIONAL (lg)


    Doesn't make any sense because I zapped on a feed on 23.5°E and not Programme National. A wrong key is used.


    OScam emu is providing two options:

    Code
    2022/09/07 19:40:03 77ABB9CB r      (emu) Example key based on namespace hash: F 6E303833 00000000 XXXXXXXXXXXXXXXX ;  23.5E 12512V sid:0001 added: 2022-09-07 @ 19:40
2022/09/07 19:40:03 77ABB9CB r      (emu) Example key based on universal hash: F 8C51F31D 00000000 XXXXXXXXXXXXXXXX ; av:5 pmt:0800 sid:0001 added: 2022-09-07 @ 19:40

    Why doesn't this happen in NCam?

    DM One & DM Two AIO+GP4.2

    Edited once, last by OnOffline ().

    Because You stil not understand How Ncam work with softcam.keys ... You need to more focus in our replies.


    Oscam just have original feature to read keys from locale (softcam.keys) that file from your device ...

    Oscam have just one reader to read (softcam.keys) Reader name is (Device_SoftCam) ...


    Ncam have more features to read keys from (softcam.keys) ..

    -from locale (softcam.keys) .. Reader name is (Device_SoftCam)

    -from internet (softcam.keys) .. download the file from web site to tmp directory then read the keys ... Reader name is (Internet_SoftCam) even if you have already empty (softcam.keys) file on your device It has nothing to do with this reader

    -from internet (softcam.keys) .. Directly to searching, reading catching AFN keys for web site (only AFN keys if the new keys was shared to web) ... Reader name is (github)


    So there is a very big difference between Ncam and Oscam in dealing with (softcam.keys)

    I understand your point but have your read my post? Ncam defines or links keys from a channel that is not the one that is currently being used.

    Unfortunately, Ncam is useless for feedhunting since most feeds have SID 1.

    Code
    2600::0001:1FFF:0000

    I catch about 40-50 Biss feeds a day and can't use NCam for that. What solution do you have for this problem?

    DM One & DM Two AIO+GP4.2

    master G here is the error


    root@vuzero:~# opkg install /tmp/enigma2-plugin-softcams-ncam_V13.0-r0_all.ipk


    Collected errors:

    * Solver encountered 1 problem(s):

    * Problem 1/1:

    * - nothing provides libcurl4 needed by enigma2-plugin-softcams-ncam-V13.0-r

    .all

    *

    * Solution 1:

    * - do not ask to install enigma2-plugin-softcams-ncam-V13.0-r0.all


    this error im getting on 2 of the vu zero original recivers on latest openpli 8.2 that can be installed from openpli page.

    Quote from OnOffline

    I understand your point but have your read my post? Ncam defines or links keys from a channel that is not the one that is currently being used.

    Unfortunately, Ncam is useless for feedhunting since most feeds have SID 1.

    Code
    2600::0001:1FFF:0000

    I catch about 40-50 Biss feeds a day and can't use NCam for that. What solution do you have for this problem?

    As I said .... ncam fetches only one key, which is the latest key if it is available on the internet and has already been published... so it reads it directly from the internet and does not print it in the softcam.keys file on the device, so in the logo file you find one line, not two...

    And AFN channels work without a problem with everyone if there are new keys that have been published by those who own them.. But if the keys have not been published, how will you open the channels when they change their code every 4 hours?!!!

    I hope you understand how ncam works !!


    With regard to other encryptions that do not work, such as Biss, you need to manually change the caid in the softcam.keys file, or use one of the plugins that enter the codes manually, such as Keyadder

    Post
    RE: AddKey aka Biss Key Editor PLUGIN [OE2.0 OE2.5]
    (Quote from fairbird)

    Sorry for my later reply. I only replaced your Virtualkeyboard .py file , but with same result. In meantime , I also asked Pure2 Team
    for help and explained where is problem in crashlog ( six.ensure_text ). I would rather wait for their response without install
    new clean image for now.
    Panda555


    Ncam need to install libcurl4 first from image feed ... If and image does not have it then ncam will be not install ....

    You need first update the feed

    Code
    opkg update

    If you got and issue to install libcurl4 .. Please ask in image topic to get right answer !!

    Quote from master G
    Quote from DemoUser

    here is the error

    Install the libcurl4 package in telnet ~ opkg update && opkg install libcurl4 


    Or use the attached version/.

    Thank you ALOOOOOOOT i tryed the command opkg update && opkg install libcurl4 and it installed on its own

    Also i downloaded the file to have it as backup

    But now i have other problem the NCAM does not start on its own when you restart the box you need to go to softcam and restart the ncam and then it instantly working


    Any solution for this problem ?

    Quote from master G
    Quote from DemoUser

    i cannot find that plugin to install it

    You can add an auto-start script.

    Follow this ~ Tutorial : How to install softcam (OSCam/CCCam) manually, if you hate ipk packages

    do i need just to install this


    -- 5 --

    Download the auto-start script from the Internet, set it to run-level, enable execute attributes ...... here is the sequence of commands to the command line (Shell):

    Code

    Code
    wget -O /etc/init.d/softcam --no-check-certificate https://github.com/s3n0/e2scripts/raw/master/softcam
chmod a+x /etc/init.d/softcam
update-rc.d softcam defaults 90  # to remove: update-rc.d -f softcam remove
reboot

    or i need to do something else ??? because i did this and i blocked the ncam now does not want to start all all :)

    Test the keys from software.keys as you wrote your issue here

    Post
    RE: Ncam Emu by RAED
    fairbird

    There is a major bug in NCam.
    constant.cw and SoftCam.Key is empty but I get ..
    (Code, 1 line)


    Doesn't make any sense because I zapped on a feed on 23.5°E and not Programme National. A wrong key is used.

    OScam emu is providing two options:
    (Code, 2 lines)

    Why doesn't this happen in NCam?
    OnOffline

Your resource for Ncam softcam.

Find configs, tools, downloads, and community support for setup, optimization, and card/server management. Master modern card sharing with Ncam. Access configurations, tools, downloads, and dedicated support for efficient Enigma2 server/client setup.