??
u need b4t uboot
Just select nand and press "ok"
Unless u got freebox uboot it will not work. u must use b4t team uboot
??
u need b4t uboot
Just select nand and press "ok"
Unless u got freebox uboot it will not work. u must use b4t team uboot
http://www.sendspace.com/file/ub1zuy
got fixed some bits for example loosing boot choose vs to v1 thanks to J.... who created it
this version got freebox and latest b4t too, got 6 mac adress to choose, also got special env for hyperio and other pkt images
Simply choose b4t after boot choose, u can switch betwheen those without messing to much
n-hyperion ( nand- hyperion)
n-nebula (nand -nebula)
U can boot from hdd to.
My advise is to flash from b4t uboot as that one will not check CRC32
Do not use freebox with CRC uboot (u may got freebox without CRC and here will flash succesfully) as that will not let u flash that multiboot. If u got old version of multiboot just change to b4t and use UPDT to update.
i will not accept any liabilities if u brick your box.
perhaps u are using freebox uboot with CRC and u try to install wrong image.
It will not flash as its check CRC sum if diffrent it will not allow to flash firmware on.
use player by j00zek the oryginal one, working best.
only all sh4 platforms been affected with that diffrent compression method.
if u want to replace
C270 - 470uF/16V
C271 - 470uF/16V
C272 - 470uF/16V
C273 - 470uF/16V
put 680uF instead of 470uF
try graterlia v1 or v2 (this use opkg system to install plugins)
THERE IS NO SUCH THING LIKE CCCAM FOR SH4 PLATFORM ONLY HACEd MGCAMD
use mgcamd with au set to A:00 instead of A:01
or osam
go to emu manager and change mapping ca1 to ca0.
that what u do, can make troubles.
Hi brendanj9554
No Joy I'm afraid, still the same. I can select the different boot options but it wont pass any of them just stops on the one selected, is there any software I can use with a null modem cable to flash the box? I have had to do this with my dreambox a couple of times
u can check with usb ttl cable why I stop, make sure u got 3 files on pendrive, nbox with some pendrives dont work.
But if u upgraded uboot from freebox to b4t the uboot will be waiting for ENV (like a bios with settings, mac adress etc).
however if u been running nebula or older image and u try to run hyperion, u need to use "special" env for hyperion images.
Standard "env" it will not load hyperion.
U can alwayes reflash uboot. But u will have to flash env as well.
--------------------------------------------------
I just readed, haha.... that u been trying update to 7.1.7, if u got updt option that mean u got B4T uboot, the image u try to install is designed for "freebox uboot"
however replace file "update" with this one and try again. This is to load up images with rootfs.img and kernel to flash b4t uboot instead of freebox uboot
http://www.sendspace.com/file/r8nn77
if u got images with rootfs and uImage they are designed for b4t uboot
if u like it hit thanks
thats wrong, set box type to none and just change from blue panel, emu manager
MAPPING CA1 to CA0- disabled. IF dont work change to enabled.
hit thanks if u like it.
http://www.sendspace.com/file/dsfnaa
SVN 2602 - full backup hyperion v3 with TSmedia 4.4, mgcamd_1.35a, latest patches and channel list 05.11.13.
For mgcamd in mg_cfg please change AU section from A:01 to A:00 if the channels will not clear up after placing N line in.
login is default: root
password: pkteam
THIS BACKUP HAS BEEN MADE ON TWIN TUNER WITH VFD CALLED BSLA 5800, THIS MEAN IF U TRY ON BSKA OR TUNER WITH LED DISPLAY U NEED TO CHANGE IT TO LED FROM BLUE PANEL.
u will find 3 files ( update too)
be aware that u need to update ENV to run any hyperion images, can be only run from B4T uboot !! or duo multiboot by J....
(if u using duomultiboot u need to enter loader, and SELECT B4T uboot!!!!)
if I use card on my own without reshare ecms are perfect ;)
set cache delay to 50ms and cache time to no more than 10s