Posts by raven

  • Multics Config need help

    Can anybody tell me what does these means ???


    ## default profile options
    DEFAULT KEY: 01 02 03 04 05 06 07 08 09 10 11 12 13 14
    DEFAULT DCW TIME: 0
    DEFAULT DCW TIMEOUT: 5500
    DEFAULT DCW MAXFAILED: 10
    DEFAULT SERVER MAX: 0
    DEFAULT SERVER INTERVAL: 1000




    ## Time/Server Config (all times start from ecm receive time)
    DCW MINTIME : 300 # minimum time to send dcw to client.( default=0, max=700ms )
    DCW TIMEOUT : 3500 # delay after that if no cw returned from servers, multics would send decode failed to client
    DCW MAXFAILED: 10 # Maximum of successive decode failed returned from a card on a channel to block sending ecm requests to this card
    ## Next options depend on your cards number and speed for this profile
    #SERVER MAX: 2 # (dont use) max server to use for decoding one ecm request. (default=0,unlimited)
    SERVER INTERVAL: 1000 # interval between sending ecm request to servers. first server will be requested at receiving ecm request from client, the second request will be done after "SERVER INTERVAL" has been elapsed and so ...
    SERVER TIMEOUT: 2500 # max time for selecting servers to decode one ecm request it must be greater than "SERVER INTERVAL"
    #SERVER VALIDECMTIME: 2000 # Disable sending ecmrequest to cards with ecmtime greater than 2000ms (default=0,all card are accepted)


    DEFAULT SERVER TIMEOUT: 3500
    DEFAULT SERVER VALIDECMTIME: 2000
    DEFAULT RETRY NEWCAMD: 0
    DEFAULT RETRY CCCAM: 0
    DEFAULT CACHE TIMEOUT: 300

  • Multics Config need help

    i have install multics R59
    i need a complete tutorial about the configuration , an extendet one
    a made a lot of search and the only thing that i found was how to create profiles


    i need to know about the clluster cache how it works , how to exchange them etc etc


    can anyone help me please

  • Need Guide To Install Java On Debian/Ubuntu

    here is the error


  • High Ecm 0919 on oscam

    Quote from master G

    NDS cards can be overclocked now with the ins7e11 parameter, all you need to do is to add 1 line to reader section of oscam.server file.


    Code
    ins7e11 = 15


    i have tried many times with different values and it shows me this error



  • High Ecm 0919 on oscam

    I have a s@ky Ita card 0919 , im using a debian server with smargo with power usb hub but i have high ecm in local is round 170-220 ms


    can you help me how to reduce the ecm , i see others that has round 100 ms
    i have triend a lot of mhz to change but thats the same




    here is my config




    [reader]
    label = ***italia
    protocol = smartreader
    device = 001:004
    smargopatch = 1
    caid = 0919
    fix9993 = 1
    ecmwhitelist = B7
    detect = cd
    nagra_read = 2
    mhz = 686
    cardmhz = 500
    ident = 0919:000000
    group = 1
    emmcache = 1,3,2
    blockemm-unknown = 1
    blockemm-u = 1
    blockemm-s = 1
    blockemm-g = 1
    ndsversion = 2

  • Debian , ubuntu or cleros

    for the moemnt i have tried clearos 5.2 and debian ,
    for the moment im using debian and im not very sutisfied becasue i wanted to bild olso an vpn server but the vpn server crashes to much , i have tried before clear os 5.2 and the vpn service was very very well and no crashes of the system
    but i wanted to test cccam 2.1.3 and with clearos 5.2 wasnt possible because of the kernel , now it is realed the new version and i m going to test that
    i havent still tried ubuntu but im going to test it


    so my question was about the opinon that the people has with type of servers , wich is more suitable and so on


    thank you

  • What version of CCcam i must use ???

    For the moment i am using oscam as card server for 2 conax card and one nds2 S*y ita and for cccam im using 2.1.3 for my peers connected with newcamd protocol to oscam
    i have tried olso 2.0.11 as cccam version but i saw that this version crashes more than 2.1.3 .
    i have tested them for 1 month with 10-15 peers

  • 0b00 Problem in oscam/cccam

    Quote from master G

    Restricting channels using oscam+CCcam combo doesnt work, you need to use one emulator or the other, either CCcam with sid assign or oscam with services.


    I think that are limits in channel restriction, i have used olso easyconfig tool and it show me limit 250 sid rescticions

  • 0b00 Problem in oscam/cccam

    yes i have don like this but there are too many sids , in F line restrictions
    i have done in oscam services and in oscam all the ecm are ok , theyy are read 100 % and ignored all the others , but in cccam the request all the sids , my % in cccam is 60-70 % ok , in oscam are 100 %

  • 0b00 Problem in oscam/cccam

    Im using oscam/cccam and i have dgitalb card readed from oscam , but my peers request a lot of bad ecm because these provider has a lot of channels digitalb,Canal Digital,TNK,Technisat etc etc
    i have made restriction in clines but they are a lot of channels
    is there any other option to block all the privder except some channels , only digitalb sids ???

  • CCcam blocking channels?

    yes my card is read by oscam , and i have made sid rejection in oscam , but im usim cccam for my peers and they request in cccam a lot of ecm (bad Ecm )
    i have made restricion in fline but the limit is 120 sids :( i have more then these

  • CCcam blocking channels?

    im using oscam server for ***ita card , i have blocked some channels in oscam because i have not the full package , but i want to block olso in cccam as my peers ask ecm for all the packages . i have used easy config to block but they shows me error : Sid limit of 120 reached
    but there are a lot of channels to be blocked or is there any config to block all the provider exept some opening channels ??


    thank