Any chance of getting a back up of the latest version please? Not tried LibreELEC yet, in fact I've not updated my box from openelec for about 8 months. I'm hoping it's come a long way.
Thanks
i have one almost done just a cpl of tweeks to finish ive just been snowd under with other commitments :( or :) depending on how yah look at it ;)
nice find ten chricters
your router is supported by DDWRT
http://www.dd-wrt.com/phpBB2/search.php?mode=resultsthe link above will give you info on how to install the custom FW to your TPlink ;)
be sure to check your rev of tplink modle to ensure you install the best and correct version of firmware
there is defo something not right with your speeds though , are you using any splitters on the cable network ? if so can you try speedtest without splitters
and hardwired to if you was wifi before , but you should not be loosing that amount of bandwith !
i always recomend DDWRT when anyone can uttilize it i find it millions times better and more sable than most stock FW out there and offcourse you can access more features with DDWRT
to
Cheers for the reply again m8
That's s lot for my old head to get around I thinks??
What's haxoware? & DDWRT m8?
Cheers
Haxoware is a custom FW that you can install on certiam modems , this alows you to be able to put the right certs in mac addys into the custom fw modem :)
DDWRT is again a cutom FW that can be installed on many many many routers , giving you more freedom to use router more efficent and better and also removing the bloatware in restrictions given in stock fw
- - - Updated - - -
aLSO CHECK OUT THIS KIT
http://www.banggood.com/Mantis…r-Extender-p-1047706.html
for this price you may aswell try it , i'd use the cat5 as my connection to whats most wanted ;) once yah have picked up the wifi and repeated it
if you can ;)
nah its was teh modem ony netgear they used to give out , its more curve to it
and defo not contact them lol , you will not get any help to clone your sub modem hub to the older style netgear modem ;)
try underground modems ;) ive not looked into cable for some time but essentially y9ur wanting to dump your superhub and get al certs ect ect from it
then with the modem (not a router/hub) in the link below as picture you install haxoware to it and the dump/certs from the superhub and as long as y9ou only have the new cloned modem online then
you will not have a issue ;) never plug in the original sub hub and you will be fine , grab any router you want thats gona be able to serve your needs i find asus are good for coverage but yah can grab old DLINK 615 routers for much cheap and install DDWRT FIRMWARE and set a few up as repeaters via wifi to get just as good coverage on a budget ,they was vermin issued same as modem was before the SUPCRUDHUBS came and destroyed teh wifi on vermin
modem http://www.ispreview.co.uk/images/news/vm_modem.jpg
hope this helps ;)
theres yer issue right there the superhub is cack and even i modem mode its cack
look into dumping your hub onto the older netgear modem that kinda looks like a PS3
with the curves this can handle 350mbps and will out preform any hub with a decent router :)
the HUBS are designed to be crap there a joke and still don't work after 40 revisions of firmware !
there real job is to capture all yer data hence why yah need to actually give vermin yer VPN details
to be able to use one ;) but you can do the above via haxoware firmware and a true 100% clone will work if stealth ed right
as long as onlyt the clone is on the network = no more shithub ;)
That's my point, there is no img in the rar, just a load of files like a nand install
ahhhh dont know sir ive not downlaoded it yet tbh , im happy with OpenAtv and just stick to that it does everything i am after and kodi works well to
i post images for 28.2 in the backup section they dont have kodi configed but i am building on the now
lol i see OpenAtv's latest posted is saying it may blank out on update so another image wil prob posted soon but no matter as im always 1 behind lolz
are you using enigma 2 if so install tunerserver onto E2 image via plugin linuxsat plugin :)
on android device within kodi instrall the VU+ PVR and config its IP address and ports ect etc
and this will give yah very stable way even within wifi ;)
so what about all the peps with sd boxes who have movies?
i have covered this earlier in the thread on how to force unchanged TILL END OFF ROLL OUT THENand or be paid for been forced to upgrade your terms and conditions ;) AND STB !
- - - Updated - - -
sd box = sd stream
they wont cut you off [MENTION=100626]least[/MENTION] for now but to get the HD movie stream you need to upgrade to an HD box
they will be stopping all SD movies and sports , and eveentualily all channels , they will just upscale the broadcasts and it will all go dark ! so dont kid yourself m8 its not gona happen !
SD Formatter 4.0 for SD/SDHC/SDXC
use this to burn wetek MicroSD card images to Msd
This software formats all SD memory cards, SDHC memory cards and SDXC memory cards. SD Formatter provides quick and easy access to the full capabilities of your SD, SDHC and SDXC memory cards.
The SD Formatter was created specifically for memory cards using the SD/SDHC/SDXC standards. It is strongly recommended to use the SD Formatter instead of formatting utilities provided with operating systems that format various types of storage media. Using generic formatting utilities may result in less than optimal performance for your memory cards.
The SD/SDHC/SDXC memory cards have a "Protected Area" on the card for the SD standard's security function. The SD Formatter does not format the "Protected Area". Please use appropriate application software or SD-compatible device that provides SD security function to format the "Protected Area" in the memory card.
Not wanting to sound stupid, but how do you install this image? I've downloaded the zip and extracted it and was expecting to see an image file to burn to sd card, but no. Do I just put all files on my sd card and boot up in wetek?
use SD Formatter to burn the image thats in the rar to Micro SD card im sure its posted on forum think i posted it when i starte dposting openAtv 28.2 prebuilt images if its not pm me and il post it for you
posted tool here
ive found some USB dont show up so could be that or its not right format ?
but did find this
https://www.youtube.com/watch?v=QNJLc60pWus
not X3 but should be same stuff , hope it helps :)
Display MoreThank you as always to Rat for these
Rat's Bouquets E2 SD FTA HD 19.6.2016
3e Updated
Network scan
Enjoy!
these left as std UK or yah set em to your location with 1.4 rats ?
Thanksgiving is an option, but keep wondering can play mkv files is copied to the hard disk Vu solo 4K?
you can play via HDD but not USB ? is this what yah mean ?
if so pain in ass but easily enough to ftp in and drop it or move from USB TO HDD
but it could be the read write rates of USB are piss poor and it has issues with them ?
dont have a solo4k to test myself but im sure yah can :)
no kodi mate?
don't think it was on there last release either but im sure the files needed to dd kodi to it are posted in wetek section
if i mind right and can be installed on this unlike the OpenPLI images :)
i have wetek play , mars hd , firestick , fire tv Kodi on every device i use tablet windps , linux ect ect
fire stick is ok for kodi but hey there banning kodi apps on it and wont be to long before they inplament some
algarythim to wipe yer device if its sideloaded (my thoughts they already banned kodi)
wetek works OK with LibreElec installed about 79% off kodi apps will work once installed ect etc
the LIVE TV integration is good , but against Mars thats where it STOPS mars is faster than wetek at most things
and if you use DROID on wetek its same crap EPG NOW AND NEXT as mars is , what are you wanting to be able to do
whats your end goal ? , i set my Mars to boot right into KODI and access the live tv via apps ,android apps , mars tv
fireTV is much better than firestick more ram faster CPU ect etc but i se the BANN on KODI will bite back at end users
at some point , and if your thinking of streaming DVB-S/C from a E2 device to KODI via PVR then firestick just not got enough
memory to be workable 100% it will glitch but FIRETV dont it runs sweet as a nut , when stream from E2 device either VU DUO or WETEK E2 OpenAtv ,
but if you gave what you wanna be able do with new device and what you DO NOT LIKE ABOUT MARS ! rthen it will help anyone give yah
what they think is a good option :)
i have seen the new U4 stb specs and it looks good , but i cant tell yah how the EPG is i do know it does have TVHeadend PVR for LIVETV
so one would assume the EPG will be working a OK , im sure Tony has one, and its a upgrade from MARS with better spec .
try having MKV on pc
then use http://www.universalmediaserver.com/
on the same system it will transcode the mkv file and will be watchable over the network on any device
you connect with :)
no point in converting when you can transcode on the fly ;)
Yup that is annoying.... google translate as best possible
yup lolz , i was just under the impression main board was English only & we had sub forums for other languages,
not good at google translate myself tbh find it hard to read ENGLISH at best of times :)
Anyone translate ?
one would think its so they have many different an increase the price boxes upwards between each box ?
for example wetek play , wetek play2 , wetek plays2 going from 90 euro to 179 euro ( poss 200odd euro for last )
- - - Updated - - -
one would think its so they have many different an increase the price boxes upwards between each box ?
for example wetek play , wetek play2 , wetek plays2 going from 90 euro to 179 euro ( poss 200odd euro for last )
