833143.jpg
as you can see there is no save option?
That's we talking about mate .different you saying and different is on your screen shot ,you using USALS ,
Anyway glad your sort out
regards Nick
833143.jpg
as you can see there is no save option?
That's we talking about mate .different you saying and different is on your screen shot ,you using USALS ,
Anyway glad your sort out
regards Nick
i know all that in the but i need advanced but in a positioner setup i move my dish put the number in to save the postion but the coloured buttons at the bottom are all blank there is no save ?
can you make screen shot , to see you situation ,why not use USALS positioner ,
regards Nick
motorized dish pal that is slightly out so need to move and save but it wont give me the option ?
You need to pot your location line my configuration , location mean your city latitude and longitude, like my screen shot then press ok after ,then transfer your satellite by using dreameset ,then give command to dish to go ,simple hotbird then go out and find signal ,any question ask again
regards Nick
hi guys ive installed the latest vix image on my vusolo2 in the tuner config it wont give me a store option for dish position when set to advanced ?
Hi mate , are you using single dish ,multi lnb,or motorise system,you don't need to go advance ,configuration mode must be simple ,let as know what system are you ,
regards Nick
HI,can i use my vu zero with dlna for see and ps4? for see channels of vu zero with wifi on ps4? is there anyway? thanks
Hi mate ,yeah you can ,Blackhole image support it ,the advanced DLNA server Mediatomb,
regards Nick
Hi Nick, thanks for the reply
It is a different channel, not the ones on 23.5e, not the Hungarian or Romanian versions
It's the Slovakian version on 0.8w, it is totally independent of the rest
Hi mate , yeah i know it mate what provider is mate ,is Slovak Telecom ,here we go mate
regards Nick
Hello,
I can't find the correct network ID anywhere for Ellesmere Port (it's not on the list of areas I've seen), can anyone shed some light on this? I'm running a vu solo box dvb-c,
Thanks
Hi mate , try any other Net Id close with your area and see ,don't forget to save after you choose some ,
regards Nick
Display MoreHey all, been viewing this channel for a long time thanks to a kind person who shared with me
I notice this afternoon it went dark, signal is 90%, checked with the person who said no problems as far as they can tell
Is anyone else able to test this channel on 0.8w ??
I have a nasty suspicion it may have gone hardware paired, I truly hope I am wrong
Please note the Slovakia (SVK) shows different content to the Hungary and Romania variants
TY in advance
Hi mate ,Sky Link & CS Link are ok till now on 23.5 E, if you mean for Slovak Telecom on Thoro is black the screen , but if you mean Rcs-Digi Tv there is ok Hungarian and Romanian ,here is screen shot ,
regards Nick
- - - Updated - - -
Here is the channels you looking for but on 23.5 east no hd ,
regards Nick
My settings shows nothing for satellite and no option to amend it, pic below.
c277c05f1.jpg
Could my sat.xml file be corrupt, would this show zero sats if it was ?
Here with this screen shot you are close, just highlight satellite like on this screen shot and keep pressing right til fine Astra 28.2 then prise green button to save , the you are cool after,other way i can help you as i said ,
regards Nick
still only getting ch4 and itv, box is on it's way out the windown shortly :)
Mate ,you haven't choose nothing ,you do exactly how you can see my config then you can scan ,but it will be better to install the ABM, if you cannot do it , let me know i do for you with teamviwer from here everything ,just let me know
regards Nick
Display MoreThanks, Nick. I dont live in England. Otherwise I would have definitely invited u for a drink and a hand with installing the satellite.
I will appreciate it if u share the video of the installation with me.
- - - Updated - - -
Thanks a lot. I am gonna buy a single LNB soon and replace it with duo LNB on the dish but isn't there a way that I could use one of the lnbs of this duo/dual LNB I already have?
Hahahahah hahahahah very nice , yeah i send the video on pm ,have look it ,but if you need me to help,then we can find one day this week i can help you everything from beginning, if ok i will give my email and we sort out no prob nothing cost ,i am happy to help ,let me know
regards Nick
Ok thanks yes i were using openpli and it was good but sometimes crash and green screen. Now with openblackhole is the best for me, but in last updates im having problems
Enviado desde mi iPhone utilizando Tapatalk
Hi mate , every image could crash , is linux box ,you can read the crash logs ,and you can see the prob , anyway
regards Nick
then which is the recommended because i have problems on audio with openblackhole
Hi mate , i have the same box you got , i try BH and i use to like , but i like more OpenPli image with sky skin v3 spot one for me ,openpli more easy for some people they are new on this hobby
regards Nick
I just found one mistake. I hope this is the game changer.
I thought I am using a diseqc switch between the lnb(s) and the motor BUT actually it is a 4way splitter.
Do you think this is the cause of the receiver showing no signal? Though I remember I once tried whether I get any signal by connecting cables from one of the lnbs to the splitter. Nothing happened!
I will edit my initial post in this thread by changing switch to splitter.
Hi mate , isn't easy to install motorise system without knowledge or some one can help you, if you living Bristol or round west text me at pm i will fix for you , other way i will show you video how you can manage to install from beginning , i am satellite installer here and i can help you ,
regards Nick
Vu zero remote control will works on vu+ duo2?
Enviado desde mi iPhone utilizando Tapatalk
Hi mate , you need Official VU+ Universal Remote Control - Compatible with Duo Duo2 Solo Uno Ultimo zero,
regards Nick
[MENTION=98385]D800SE[/MENTION] thanks for the info, got a sim card writer and a 16in1 sim (blank)
I'm ok with the image flashing, (not really found 1 i like yet LOL)
my Se v2 is sim 2.2 and Ssl is 88a, so i would like to try the
some of the a8p and japhar images, also the original images.
cheers
Byte
Hi mate , if i have DM 800 SE ,I prefer buying Original A8P SIM card
regards Nick
Display MoreHi
Sorry if this is a dumb question but I'm away from my box at the moment and can't check it. My Alien 2+ has 2 satellite tuners. If i connect tuner 1 to my USALS motor and tuner 2 to a fixed 28.2 dish (with the correct tuner settings set in Enigma2) would the box be clever enough to record a programme from 28.2 using the second tuner, while the USALS tuner is say at 13e or would it drive the motor to use tuner 1 to record the 28.2 programme?
I run OpenATV on the box if that makes any difference.
Thanks in advance
Ben
Hi mate yes the can record one fix dish , cause you have single dish point at 28.2 east second tuner , and 1 tuner is USALS ,
Regards Nick
Display MoreHi this is my first post so please go easy on me !!
I have a DM800 HD that was running ok upto a few weeks ago but I'm now getting no channels at all.
Tried a rescan but getting error message of Nothing to Scan.
When I go into Tuner Settings its showing nothing connected.
When I gonto Satfinder everything is on 0.
Can any of you guys point me the right direction of what the issue might be ?
My dish is aligned ok as it's working on my paid sub box in another room in the house.
Box is running Enigma II, Blackhole Dream Elite, CCcam 2.1.4
Thanks
Jon
Hi mate ,1)this box as has no channels ,you can send the channels strait way with dreamset don't need to scan,2)if other box is runing that's mean that box must be active and this one passive ,you can configuration the same as other box have on configuration , so you have dual way lnb ,you are motorise system or single dish , please let ask know ,
regards Nick
Hej everyone,
I get no signal at all after installing the dish and connected it with the HH moteck motor and my VU+ 4k receiver. The LNB attached to the dish is a duo quad (19.2E astra and 23.5 astra). I have connected the four cables from the LNB with a diseqc switch and of course one port of the switch is connected to the motor.
What am i doing wrong here? how am getting no signal at all?
Hi mate , very confuse system ,why is duo quad LNB on the motorise system ,you need single lnb , if is motorise system ,duo quad lnb must be on single dish and you can use diseqc switch ,wont work like you saying mate ,the dish isn't point nowhere ,explain more you situation ,and we can find solution,
regards Nick
Thanks for your help.
Just a quick question if i need a new motor is there any usals motor for the big dish size?
No mate , USALS motor can hold till up 1.2 m dish and it be nice to be aluminium ,for your size and up we need heavy duty actuator,
regards Nick