Posts by ddinc
-
-
-
-
Now I have solved the problem.Thanks for reminding me to check port.
-
Static ip ,ok.I see now that when I portforward ports 100 and 12000 to the same IP one is cancelled ?
ISP ??
-
Since a while I cannot access oscam from an outside Ip.
Within LAN no problems
[webif]
httpport = 100
httpuser = xxxx
httppwd = yyyyy
httptpl = /etc/tuxbox/config/tpl
httprefresh = 10
httphideidleclients = 0
httpshowuserinfo = 1
httpshowreaderinfo = 1
httpallowed = 127.0.0.1,1.0.0.1-255.255.255.255
-
Is there a way or a version to keep original config after new Oscam emu ALL Images mips--arm .ipk .deb install ?
Every time I have to copy the whole config file.
-
?? As I wrote before:caid 1810 movistar spain
-
I have tried your config before.
What dou you mean by"which channels"?
-
Have problem with caid 1810(movistar Es).
Every 4-5 Minutes freeze.
If I zap to another 1810 channel and then back resolves in 80 % of cases.
No problem with SKY de though.
Client box with no local.
Vers.11693-798
-
I have no problem with SKY but with HD + ??
-
I have peers with caid 1830 and 1843 but HD+ channels always black.
Is HD4 shareable ?
-
I agree but 75 cards(all known cards) and not a single one clearing ??But "ok cards rate"80-90% ?????
I have 2 more peers like this one.
I doubt if my config could be the culprit
-
I mean:I leave only one proxy in the server file.
Status:75 cards connected.
BUT:While zapping NOT A SINGLE CARD CLEARS
Reader stats:90%. Ok ????
-
Although there are 75+ cards on the server none of them clear .
But webinfo tells me that 90 % are OK ?????
Fakes ?But never that many ??
Oscam 11689 -798
Dreambox 820
-
I don't know how the service ID s came into the config:eye roll::eye roll:...have deleted
"keepalive" also deleted...
log has only :cache,rejected group and timeout" entries no errors or else
BTW:I made the attached change to the loadbalancer and at the moment it seems to be better.
But I need further testing.
Maybe I should add that I have about16-17 peers connected and as some cause"WARNING: reader ecm pending table overflow !!"
I had to add to some servers:
ratelimitecm = 2
ratelimittime = 7000
srvidholdtime = 2000
-
to avoid any misunderstanding I am attaching every file
-
Especially on SKY Germany ,server box(dream 820) frezes every 3-4 min for 5-6 sec.
But the client box(dream 500) on the same LAN has almost no freezer
-
-