Posts by hecha71

Quote from mimisiku

Small wish left. Could you implement the official OpenPli display-skin.xml?

perhaps I made a mistake by making a backup copy from under the openpli image using the barry allen plugin

in the fact that you need to make backups in particular of open pli and the alliance only from under the dreams image in Barry Allen ,then everything will be done correctly.

In addition, to install images in Barry Allen, open pli and the alliance use only images from under the dream image.

The OPENPLI backup was made from under the dream image, New Image Peter Pan Neverland

I have not changed anything here, everything is as it was originally and I have no problems with the display and LEDs

Quote from mimisiku

Problem with power LED. Stays RED after completed boot (should be BLUE). Barry Allen 12.89 does not backup.Missing pigz dependency… LED problem also on other OpenPli home-builds too…

I didn't notice anything that you listed as a problem with both the LEDs and the creation of a backup in barry allen

Quote from zioercules

corrupted archive does not unzip it

it can't be, you have an old version of the winrar program

update or install the latest version

enigma2-plugin-drivers-network-usb-r8188eu_1.0-r0_all.ipk - this installation package is empty with a zero size see the screenshot

Quote from zioercules

Code

Thanks really very kind I enclose the drive I need to read the wi - fi key

unpack the WinRAR archive-the path through the folders inside

before installing, stop the enigma

init 4

after downloading, give the command

init 6

try connecting via Wi-Fi, maybe this driver will work

Quote from zioercules

Code

Thanks but I only have the .ipk package and I don't know how to extract the extra folders I don't know the destination path of the drives can you help me please

provide me with the package kernel-module-8192cu-4.4.35_4.0.2-9000_sf8008.ipk here in the topic I will unpack and indicate the path where to put the driver

Quote from zioercules

Hello I'm trying to install the drives for the tp-link TL-WN823N wi-fi dongle

if I put with opkg install kernel-module-8192cu-4.4.35_4.0.2-9000_sf8008.ipk

from error structure you have solutions thanks

if there is no feed for 900 then unpack the package from 8008 and put the files manually by connecting via ftp

Quote from piterfree

Code

now that I have your soft I give you confirmation of the Barryallen, check yourself, I have unpacked the soft and in
lib / modules / 3.14-1.17-dm920 / kernel / drivers / openvision
in my soft it is like this with OpenVision v. 318 my favorite

in yours at the same position there is no openvision but enigma / enigma.ko,

What are you comparing, I don't understand? what was 318 and is now in 408 ..90 revisions ago ..contact the Prince of Persia, he directs what edits to make in the source code for compiling the assembly in lib/modules... and how to name enigma/enigma.ko or openvision/openvision.ko

in yours at the same position there is no openvision but enigma / enigma.ko,-

see the screenshots-the image was uploaded today from the storage of the author of the image, this is what I installed-unpacked everything the same as in the backup copy that I provided to you. these changes were made not by me nor by the barry allen plugin but by the openvision team

stop fantasizing

And now, actually,

and so, according to this assembly 407/408, the image compiled before 2021.08.08, there were problems, but not with scanning channels, but with the image, it seems that the antenna was not configured and there was no picture from the channel or it fell apart, but the channels were scanned in full from the selected satellite.

but you all kept saying that it doesn't scan and no one really voiced the essence of the problem.

so, you can download a clean build again from the repository of the author of the compiled build released on 2021.08.08, and everything will work

and learn how to use the capabilities of your receiver to the full.

Good luck to everyone

Quote from piterfree

Code

with Barryallen you can test images of both the 900 and 920 and not the problems of the tuners ... therefore it is recommended to use Barryallen and 'made to test with different images ... or am I wrong.

well, let's say you understood me almost correctly, let's take it in order.. initially, the dm 900/920 native image is based on a dreams receiver and has been sharpened for these images since birth..

therefore, this is my opinion and not only the use of images based on pli in the receiver's flash memory is suicide

from this and the study of information from different forums on 900/920 receivers, I have my own point of view-an image based on a dream os and no other should be installed in flash memory , and in order to use other images of oe2. 0 from open pli or the alliance, I use a multi-upload plugin by Barry allen

I'm even sure that many users killed their receiver using openpli images, and then sent it for repair.

you can see that everything is scanned for me both now and before ... and it's not about Barry Allen. the drivers used are the ones specified in the image used, not some others. the only thing that replaces Barry Allen is the loader, you can safely install the image from 900/920 sim2. 30 or jafar into the plugin, and the image will start and work on your original

if you don't believe me, talk to @ gutemine about this

Quote from piterfree

I was born polite and I do not insult anyone if there are those who have problems ....

give an example of your ability backup with a couple of free channels on astra 19 or 13 to prove it,

Of course, I apologize if I offended you or anyone else in some way, but I don't understand how you can't do basic things

here are the screenshots of 36E 13E(I'm not interested in astra 19E) and how you requested a backup copy of the image made using the barry allen plugin

https://www.mediafire.com/file/guwv6t2dh1i6o44/openvision-11.1-r408_backup+specifically+for+piterfree_dm920_web.tar/file

Quote from robertjust

But I see that you have tested it on Dm900 not on Dm920 ... can this backup confirm that it is for Dm920?

Thanks

guys, I install questionable builds only in barry allen so that I don't restore the receiver later,

if you are in doubt about something, do not install other people's backups or assemblies in the receiver's flash memory..

finally, learn to fully use the capabilities of your receiver

https://www.linuxsat-support.com/thread/145566-barry-allen-multiboot-plugin-installation-error-on-dreambox-dm920/?postID=582346#post582346

https://www.linuxsat-support.com/thread/149258-newnigma2-on-barry-allen-not-starting-dm920-uhd/?postID=626097#post626097

Quote from robertjust

Is this already configured for Astra-m Abertis?

Thanks

my receiver has a tuner installed without t2 mi support

therefore, I can neither confirm nor deny

IPTV works very well

DM920 image: openPLi-8.1-dm920
based on OpenPLi » Nightly builds
- openpli-develop-20210816
- cccam 2.3.9, gbox, ncam, oscam-tnt, oscam-emu 11695, oscam 11695 (port:8888)
- GStreamer 1.18.4, ServiceApp, Streamlink, YouTube, Streams, ...
- OpenWebif 1.4.8 r5, teletext, LED manager, LCD display skins, ...
- feed plugins/settings/picons/softcams, ...
- blindscan, cablescan, terrestrialscan, fastscan, MIS/PLS scan 5.0°W

TESTED ON DM900 IN BARRY ALLEN

Quote from fairbird

Because You are still using old version, old enigma2

Code

AttributeError: TemplatedListFonts instance has no attribute 'KEYBOARD'

update your image to 7.1 ...

I am amazed at your endurance and patience, apparently he looks at your answers through a crooked mirror, he just mocks you, ban the smart guy for a month, let him think about sending his useless crash logs or updating his image

before giving advice, I checked the work of this plugin on Dream Elite 6.0 and understood the reason for the failure - the old version of the image, but he clearly does not want to see the right way out of this situation. This is equivalent to customizing the work of the plugin to the outdated image of openpli 4.0

AddKey aka Biss Key Editor PLUGIN [OE2.0 OE2.5]

Quote from satelitemaniaks

Can't 50 portals be expanded to 100 portals?

yes, please, here's 150 for you, just look at the screenshots

:rasta2bigsmoke0gf1: after edits and saving, restart the GUI

Quote from espaun206

install using command wget http://tunisia-dreambox.info/TSplugins/AddKey/installer.sh -O - | /bin/sh

but crashed when I add manual key

dreambox Dm900 Dream Elite 6.0

1.update your image on Dream Elite 7.1

2.to add a key, you need to enable the desired channel and then edit

3.and in order not to suffer, select the item in the plugin menu download online there are 4 sources there the choice is yours

Quote from stingray13

Does this replace Su1s completly?

---

Sorry Couldn't work out how to edit my previous post either, Does this work on PY3 images?

it is universal for both 2/3 PY

the current version is 1.0.42

 enigma2-plugin-extensions-e2m3u2bouquet_1.0.42_all.ipk

enigma2-plugin-extensions-e2m3u2bouquet_1.0.42_all.deb

So far, any dream OS user can replace the file from the attachment in modules(in the e2m3u2bouquet plugin) and everything should work

e2skinpatcher.py - for dream OS

Quote from ilovebytes

"unknwon Media type" and then it stops with "Stream ended"

In the plugin settings, set it as in the screenshot

Quote from ilovebytes

merlin image on a dm525

I have Barry Allen installed ,I can check the installation and operation of this plugin on Merlin

I also installed and gave all the commands that I wrote in the previous message. but there is a crash on Merlin that is not on the image of P P and never was

Quote from ziko

Dream fixed.

who has this command gives an error, we give the following commands and see what telnet writes to you.. I did it on the image of PP

подходящее обновление

apt install wget

apt install curl

apt install tar

Since for some reason the flash-nrf52 package was not installed, we give another command

apt-get autoremove (this command is not mandatory for everyone, only if you had a similar situation like mine)

after a complete restart of the receiver

again we give the cherished telnet command to install the plugin

wget -q "--no-check-certificate" https://raw.githubusercontent.com/ziko-ZR1/Multi-Stalker-install/main/Downloads/installer.sh -O - | /bin/sh

thank you so much for your help mic71 : beer1: