I wrote a new image to my dm800 and restored my satellite info through Dreamset but although my channels are all there they are greyed out becuase the tuner says it's Unconfigured. What do I transfer via FTP or how do I restore the tuner configs so I don't have to go through setting up all my sats, lnb's, switches etc all over again ?
bump
uhhh... is "dream elite" not the ORIGINAL image ?
Original Dreambox image.
See that's the point, he wasn't asking about scanning multistream. He only mentioned it I think as a way of saying which version of tuner his box has (or came with) because not all tuners necessarily support hardware blindscan.
So just to clear this up... the triple tuner is the new one, right, dvb-s2x ?
Oh and I understand fully about the combinations involved in scanning multistreams. Almost a form of encryption if you had to guess at it.
Just wanted to bring this back to the top in case maxy1 wanted to elaborate.
I think alb misunderstood your question.
I've been to the end of the interwebs and back and can't ascertain if the dm900 has a functioning blindscan with the new tuners, the old tuners or any in between! Anyone that has one of these feel free to chime in with a definitive answer.
No im not mistaken. Powervu working even auto role is working. But some channels blacked out. 57E MTN Networks channels do auto role but all I get black screen. I think it has something tp dp with my box and its drivers.
So it wasn't working all this time and magically you have it working. Please explain further or better still backup your image and post here for others to verify.
He's mistaken, or it's some peculiar channel that doesn't use des/dvb decryption library.
sf4008
It has to match your installed version of Python I think. I looked up Echannelizer it looks like a type of Dreambox Edit on steroids is that about right ?
Display MoreYou can but your totally defeating the object
Just buy a tuner instead
Spent all that money on the receiver (which cant do 4:2:2) and you want to watch it on the PC
Never understood that logic
Already have a separate tuner. The point here was to make sure that oscam was functioning properly before moving on to creating stream links.
It's working now.
Functionally all I want (and I suspect others as well) is to create links from scanned channels. If you've scanned thousands of channels you're not inclined to manually add them as stream links one by one.
At the moment I don't even use bouquets I work from the channel list. If we could create a mirrored bouquet of each satellite (stream links) that would be ideal.
he wanted configs and the configs are in this . or did i misread it . If i did i'm sorry feel free to delete it
Not sure why you are apologising you were trying to help
I did not denigrate him for trying to help, but as you can see he confused the poster who was actually trying to help with the subject matter of the thread.
....deleted....
I'm interested in this as well. Does zap2it provide a downloadable form of their guide ? If not the site would have to be scraped, probably trivial for someone who can code python.
The second and more difficult part I think is mapping the listings to actual channels to make it functional.
Display MoreHere you go my friend . I was stuck like you for a while and thanx to the guys here they helped me a lot. So i felt i could help you out by posting this image i made.
It is OpenPli 2016 i have changed bootloader and screen pictures to another pli picture and have integrated the following
Cams:-
Oscam 11391 rev 755 rev2 + configs (all you have to do is edit them to what you want and it will work)
mgcamd 1.35a
scam 3.59
cccam 2.30
Plugins
TSPanel 8.0
FlashBackup 6.2
FlashExpander 0.33
PluginSkinMover 0.6
Streampes configs (so you can log in need be as well)
Added Cardserver Support for Oscam as well
All you have to do is flash the Image , scan in your channels , ftp to your receiver and go to /etc/tuxbox/config/oscam and edit the files.
oscam.conf put you username and password for webif
oscam.server change the caid ident and emu_au providers from the zeros to your preferred ones for your services
softcam.key add in your powervu keys for the services you want and leave evrything else as is
restart enigma
press blue button to and go to softcam setup go to select cardserver and press the right arrow key so oscam comes up and go to restart cardserver option on same screen and press "OK" button
Open your browser on you computer type in your dreambox IP example 192.168.0.XXX:8888 and you should see the webif loginscreen come up
Once you do that you can edit oscam files directly if you wish through the webif.
Also just please note the Image is close to 60mb so flash is nearly full. Once image is installed DCC shows its about 57mb used up and 3mb free, so if you have an internal hdd or usb flash drive follow the small guide below and you shouldn't have any issues with additional storage :-)
-----------------------------------------------------------------------------------------
Gaining Extra Memory and Storage Space (Flash Expanding)
-----------------------------------------------------------------------------------------
With DCC connect to your receiver and go to Tools and you will see how much Storage you have on
root directory and also hdd (sda1) or usb depending on what you choose to use
Next press blue button and select System Tools
Now select from next menu the title Menu Swap File Tools
Select Create Swap File on Usb or HDD depending on what you want
Once Created select Activate Swap on your HDD or Usb
Exit
Restart Enigma or Reboot
Click on Telnet in DCC and Type in the following commands pressing the return key after each line This has been tested and confirmed to work :)
For (USB) Flash Drive
mv /usr/lib/enigma2/python/Plugins/Extensions /media/usbmv /usr/lib/python2.7/site-packages /media/usb
ln -sfn /media/usb/Extensions /usr/lib/enigma2/python/Plugins/Extensions
ln -sfn /media/usb/site-packages /usr/lib/python2.7/site-packages
init 3
Then you can restart enigma or just reboot your receiver
---------------------------------------------------------------------------------------
For (HDD)
mv /usr/lib/enigma2/python/Plugins/Extensions /media/hdd
mv /usr/lib/python2.7/site-packages /media/hdd
ln -sfn /media/hdd/Extensions /usr/lib/enigma2/python/Plugins/Extensions
ln -sfn /media/hdd/site-packages /usr/lib/python2.7/site-packages
init 3
Then you can restart enigma or just reboot your receiver
Once this is done if you like reconnect with DCC to your receiver and go to Tools and you will see how much Storage you have on root directory and also hdd (sda1) or usb. You will the changes in storage
---------------------------------------------------------------------------------------
I hope this helps you out
cheers
p.s. If i have missed anything please any feedback would be grateful as i am still learning myself and thankyou to everyone for there support and help
OpenPLi 4.0 Oscam 11391 rev 755 rev2 + Softcams & Plugins Integrated.rar
Exactly what does this have to do with this thread ?
This might be useful. Will need to translate the menus into English first so I don't cause too much damage clicking the wrong thing.
probably, the one without "softcam.key" area, is simple oscam,and the other is oscam-emu .
That's what I thought but I have a working emu here and no softcam option under files.
From what master g said I think it was compiled with the wrong web if.
Is the Oscam web interface "baked into" the binary when compiled ? I've noticed some have FIles/SoftCam.Key (which is handy) and some don't . Or is there a separate file that can be updated on it's own ?
Really...whats the difference between plain oscam and oscam-emu..
I'm going to ignore all the garbage after your initial statement.
As far as I know regular Oscam CANNOT be configured to work with an emu or softcam.key file so one of us has something to learn. Maybe it's me. I'll wait for someone else to chime in.
