Posts by mark77

  • PowerVu Keypatcher by taras-ua - Key updater script for AFN package channels

    Quote from taras-ua

    mark77 I don't see any reason to run the script directly from the receiver. It has been designed to run from any host equipped with Python3. Doesn't matter Linux or Windows. So I consider the issue of Python2 support closed.

    Regarding your case. First of all, you should set up your oscam to show a picture with the current keys, and if it is possible on your receiver auto-update the keys. The script allows you just not to wait for the auto-update of keys and nothing more.

    It seems that autoupdate does not work, is there a way to check a log and understand why autoupdate does not work?

    I successfully patched 2 oscam of samur (718 and 724) but autoupdate does not work.

  • PowerVu Keypatcher by taras-ua - Key updater script for AFN package channels

    Thanks Monlo, i've tried again on py2 image (as i tried on py3 image), it write the keys as soon i run the script, but after a key update (and written on the forum) it does not write the new one on the file and the channels don't work any more. I don't want to lunch the script each time. I think only taras-ua could help, but he is not writing.


    Quote from robertjust

    But key_patcher.py work only on Python3? I have image Python2....

    Look page 2, you can, i hope you will be more lucky than me. Let us know.

  • OSCam-ICam For SKY IT, UK, DE

    Quote from Panda555

    As far as I know skyde only works with caid 098D. If you look in oscam.log, you will see that skyde channels use both caid 09C4 and 098E. Your server will also use these two caids. That's why I set those two caids to ignore in oscam.dvbapi. As for radegast, check if you have it in oscam.config and delete it. Oscam icam no longer works with radegast protocol (only dvbapi). As for the stability of watching skyde as well as skyuk, it mostly depends on whether the provider has icam set up on the server, but unfortunately this is not the case with free servers.

    PM

    I told you about that server in the PM. It still somehow works best for skyde, but only if you use it him as a reader( without other servers in oscam.server). If more readers are used, then the image freezes in most cases.If you entered the url for that server in the browser, you will see a script at the bottom for oscam icam using telnet.

    Super Panda ! What that script does? Write the line in oscam.server?


    Edit: You are right it does not open 09C4, i'll push to ignore.

    I don't have radegast in oscam.config. Strange!!


    Do you have an answer for this? --> "Someone said, if one streamrelay channel is not active (for ex. cinema action, from last ciefp) try to rescan. How to rescan?? Or how to fix it or other channels?"


    And these means that the address of the channel is wrong or that the server don't have it? -->


    "

    • 2023/08/29 01:33:36 00000000 (emu) WARNING: stream client 0 no data from stream source
    • 2023/08/29 01:33:40 00000000 (emu) WARNING: stream client 0 - stream source closed connection

    "


    luckystarc lets see in the next hours, i'll made test too.

    Edit: can't tell you anything, i don't have it.

  • OSCam-ICam For SKY IT, UK, DE

    I have P: 09C4:000000, what does it mean? What's the effect of it?


    Your configuration should be ok (experts can say if is true), i suggest to try some free server and check your results, some of this should work with DE.


    Some questions:


    I've configured assuming i use dvbapi, from some test my configuration should be ok. But why i have these line?


    • dvbapi) Demuxer 1 trying to descramble PID 0 CAID 09C4 PROVID 000000 ECMPID 1B17 ANY CHID PMTPID 0060 VPID 00FF
    • 2023/08/29 01:17:01 7ABFE391 c (dvbapi) Demuxer 1 trying to descramble PID 2 CAID 098D PROVID 000000 ECMPID 1C17 ANY CHID PMTPID 0060 VPID 00FF
    • 2023/08/29 01:17:02 7ABFE391 c (ecm) anonymous (P: 098D:000000:0087:1C17:0B62: #ECM_L:B7 #CW=00000000000000000000000000000000 HOP:01): not found (97 ms) by cline (F/2/2/2) - Sky Cinema Premieren +24 HD - Sky DE (Icam)
    • 2023/08/29 01:17:02 00000000 (emu) send_to_radegast send failure


    "(emu) send_to_radegast send failure" ??? Why?


    Other question:


    Someone said, if one streamrelay channel is not active (for ex. cinema action, from last ciefp) try to rescan. How to rescan?? Or how to fix it or other channels?


    About UK:


    When i have these lines:

    • 2023/08/29 01:33:36 00000000 (emu) WARNING: stream client 0 no data from stream source
    • 2023/08/29 01:33:40 00000000 (emu) WARNING: stream client 0 - stream source closed connection

    It means that channel is not active right? On sports channels, just "Sp Mix" seams instead active, all the others seams to me inactive (from last ciefp). Is it the same for you all?

    Thanks

  • PowerVu Keypatcher by taras-ua - Key updater script for AFN package channels

    Hi Panda555, thank you for the kindness, as always.


    Problem not solved, all you say is right, and is all i do. Waiting on afn channel for quaters of hour, but nothing happend.


    It is not writing keys in softcam.keys.


    • 2023/08/23 22:05:33 37F1209C c (ecm) anonymous (0E00@000000/0000/0068/99:7ADBABAE7EF3865FFC8723061F7642CC): not found (1 ms) by emulator - AFN
    • 2023/08/23 22:05:33 37F1209C c (dvbapi) Demuxer 0 restarting decoding requests after 1 ms with 1 enabled and 1 disabled ecmpids!
    • 2023/08/23 22:05:33 37F1209C c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0E00 PROVID 000000 ECMPID 17BA ANY CHID PMTPID 13F0 VPID 048D
    • 2023/08/23 22:05:42 7F755C38 r (emu) Key not found or invalid: P ****0068 00
    • 2023/08/23 22:05:42 7F755C38 r (emu) Key not found or invalid: P 0009FFFF 00
    • 2023/08/23 22:05:42 7F755C38 r (emu) ECM failed: Key not found

    I don't even know if script is running in background. Don't know if is because i have not "root" as password.


    Tested on Oscam 11718, now on 11724.


    Soon i will try the ncam way.

  • PowerVu Keypatcher by taras-ua - Key updater script for AFN package channels

    Now i've sent the script again, and it's working. It has modified softcam.key in the etc\tuxbox\config with the last keys from the forum. But not modified softcam.key in usr\keys. Just to know.

    I'm gonna see if will update the key in the next hours.

    Thank you all for the support :)


    Edit: When keys changes, script is not writing keys in the file or catching new ones from the forum. On channels only black screen :(

    And i don't know why

  • PowerVu Keypatcher by taras-ua - Key updater script for AFN package channels

    Very nice to hear you Panda555 :) How are you?


    I used the script from windows cause i have python 2 image. Anyway i putted the script in the 2 folders you said. But still can't open the channels after 10 minutes.


    This is the result of the script:


    Senza nome9999.png


    But in the oscam.log or via openwebif still these lines:


    • 2023/08/19 21:48:41 771090C0 r (emu) Key not found or invalid: P ****0068 01
    • 2023/08/19 21:48:41 771090C0 r (emu) Key not found or invalid: P 0009FFFF 01
    • 2023/08/19 21:48:41 771090C0 r (emu) ECM failed: Key not found
    • 2023/08/19 21:48:41 3D71F758 c (ecm) anonymous (P: 0E00:000000:0068:17BA:0000: #ECM_L:99 #CW=00000000000000000000000000000000 HOP:00): not found (1 ms) by emulator - AFN
    • 2023/08/19 21:48:41 3D71F758 c (dvbapi) Demuxer 0 restarting decoding requests after 1 ms with 1 enabled and 1 disabled ecmpids!
    • 2023/08/19 21:48:41 3D71F758 c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0E00 PROVID 000000 ECMPID 17BA ANY CHID PMTPID 13F0 VPID 048D


    Still I don't understand, i will try to run the script again

  • OSCam-ICam For SKY IT, UK, DE

    There is not ipk for version 11724: RE: OSCam For sf8008 and others [ boxes_Arch:arm ]


    you can install ipk from the first post , then rename 11724 as that via ftp


    I don't know the difference between libusb, libusb aio and libusb pcsc aio. Sorry, maybe someone else can teach us.

  • PowerVu Keypatcher by taras-ua - Key updater script for AFN package channels

    Ok, i had already a softcam.key in in etc\tuxbox\config but not in usr\keys, it was not very recent and at the end of the file there were added :


    P FFFF006D 00 F793BD53EEB9FD ; added by PowerVU KeyPatcher 2023-08-18 02:13:58.964309

    P FFFF006D 01 DB9EFE98383A72 ; added by PowerVU KeyPatcher 2023-08-18 02:13:58.964309


    but nothing else, seems to me it add them at the time i launched the script, but then there nothing else added.


    I also tried to change the file with the one you posted, renamed as softcam.key and putted in etc\tuxbox\config and in usr\keys, but after a day there were not added any keys at the end of the file. Permissions are 755. And still not opens the channels.


    I'm sorry again, where am i wrong?

  • OSCam-ICam For SKY IT, UK, DE

    Quote from mark77

    Hi samur , hi to all.

    On Gigablue trio 4k, with OpenSpa 7.5.003, i've installed your last oscam 11724-798 (i think you can update compatibility list with trio 4k) renamed as Oscamicam. Followed the steps of topic "everything you need..." , i think i use dvbapi (not sure) and setted that parameters. Then i use list from post: RE: OSCam-ICam For SKY IT, UK, DE

    Oscam works well, but i can't open no one channel of icam bouquests. On some channels seems i'm conneted but always black screen.

    I also tried to use again the oscam on the first post but with the same result.

    Can i post a log to receive help? How to set up and where is the log file?

    Now back to 11718-798:


    2023/08/18 16:57:58 23F41125 c (ecm) anonymous (P: 09C4:000000:006E:1B0E:0BBD: #ECM_L:B7 #CW=00000000000000000000000000000000 HOP:01): not found (1 ms) by cline - Sky Atlantic HD - Sky DE (Icam)

    2023/08/18 16:57:59 23F41125 c (ecm) anonymous (P: 098D:000000:006E:1C0E:0BBD: #ECM_L:B7 #CW=00000000000000000000000000000000 HOP:01): timeout (5001 ms) by cline (F/2/2/2) - Sky Atlantic HD - Sky DE (Icam)

    2023/08/18 16:58:00 23F41125 c (ecm) anonymous (P: 098D:000000:006E:1C0E:0BBD: #ECM_L:B7 #CW=00000000000000000000000000000000 HOP:01): not found (1181 ms) by cline (F/2/2/2) - Sky Atlantic HD - Sky DE (Icam)

    2023/08/18 16:58:00 23F41125 c (dvbapi) Demuxer 0 restarting decoding requests after 1 ms with 2 enabled and 2 disabled ecmpids!

    2023/08/18 16:58:00 23F41125 c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 09C4 PROVID 000000 ECMPID 1B0E ANY CHID PMTPID 0064 VPID 04FF

    2023/08/18 16:58:00 23F41125 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 098D PROVID 000000 ECMPID 1C0E ANY CHID PMTPID 0064 VPID 04FF

    2023/08/18 16:58:00 23F41125 c (dvbapi) Demuxer 1 restarting decoding requests after 1 ms with 2 enabled and 2 disabled ecmpids!

    2023/08/18 16:58:00 23F41125 c (dvbapi) Demuxer 1 trying to descramble PID 1 CAID 09C4 PROVID 000000 ECMPID 1B0E ANY CHID PMTPID 0064 VPID 04FF

    2023/08/18 16:58:00 23F41125 c (dvbapi) Demuxer 1 trying to descramble PID 2 CAID 098D PROVID 000000 ECMPID 1C0E ANY CHID PMTPID 0064 VPID 04FF

    2023/08/18 16:58:00 00000000 (emu) send_to_radegast send failure


    Is it just a server problem? Or I made some mistakes configuring?

  • PowerVu Keypatcher by taras-ua - Key updater script for AFN package channels

    I had to install python from the microsoft store, done this, your script worked nice. But still black screen :(


    2023/08/18 15:22:02 23F41125 c (ecm) anonymous (P: 0E00:000000:0066:17B6:0000: #ECM_L:99 #CW=00000000000000000000000000000000 HOP:00): not found (1 ms) by emulator - AFN!prime Atlantic

    2023/08/18 15:22:02 23F41125 c (dvbapi) Demuxer 0 restarting decoding requests after 1 ms with 1 enabled and 1 disabled ecmpids!

    2023/08/18 15:22:02 23F41125 c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0E00 PROVID 000000 ECMPID 17B6 ANY CHID PMTPID 13EE VPID 04F1

    2023/08/18 15:22:03 52AE8404 r (emu) Key not found or invalid: P ****0066 00

    2023/08/18 15:22:03 52AE8404 r (emu) Key not found or invalid: P 0009FFFF 00

    2023/08/18 15:22:03 52AE8404 r (emu) ECM failed: Key not found


    It always finds just that P ****0066 00 and P 0009FFFF 00 that are not the last posted.


    It said it has patched oscam-1.20_svn-r11718-798. I have also other oscams, if want to patch them, do i just have to active and patch one by one?

  • OSCam-ICam For SKY IT, UK, DE

    Hi samur , hi to all.

    On Gigablue trio 4k, with OpenSpa 7.5.003, i've installed your last oscam 11724-798 (i think you can update compatibility list with trio 4k) renamed as Oscamicam. Followed the steps of topic "everything you need..." , i think i use dvbapi (not sure) and setted that parameters. Then i use list from post: RE: OSCam-ICam For SKY IT, UK, DE

    Oscam works well, but i can't open no one channel of icam bouquests. On some channels seems i'm conneted but always black screen.

    I also tried to use again the oscam on the first post but with the same result.

    Can i post a log to receive help? How to set up and where is the log file?

  • PowerVu Keypatcher by taras-ua - Key updater script for AFN package channels

    Hi taras-ua, i don't have phyton3 on my gigablue trio 4k. I downloaded phyton3 for windows, opened it and tried to type the script but:


    >>> python3 key_patcher.py --ip 192.168.1.102 --login root --password xxxx

    File "<stdin>", line 1

    python3 key_patcher.py --ip 192.168.1.102 --login root --password xxxx

    ^^^^^^^^^^^

    SyntaxError: invalid syntax


    >>> key_patcher.py --ip 192.168.1.102 --login root --password xxxx

    File "<stdin>", line 1

    key_patcher.py --ip 192.168.1.102 --login root --password xxxx

    ^^^^^^^

    SyntaxError: invalid syntax


    I've placed key_patcher.py in the c:\windows directory.

    Can you please give me a hand please?