Sky deu keep crashing and lag it's normal?
are you using oscam from this thread? if not, then why do you even ask?
afaik this is the only oscam with icam, that doesnt crash regularly, and if u meant freezes, thats a different topic...
Sky deu keep crashing and lag it's normal?
are you using oscam from this thread? if not, then why do you even ask?
afaik this is the only oscam with icam, that doesnt crash regularly, and if u meant freezes, thats a different topic...
Ciao, qual è la migliore versione Oscam per Vu Duo 4K con firmware OBH 5.3?
Grazie
Dipende cosa intendi per "migliore". Per cosa userai oscam?
I use Oscam-Icam for Sky IT-DE-UK
I use Oscam-Icam for Sky IT-DE-UK
Use the ipk from the first post.
Hi samur , hi to all.
On Gigablue trio 4k, with OpenSpa 7.5.003, i've installed your last oscam 11724-798 (i think you can update compatibility list with trio 4k) renamed as Oscamicam. Followed the steps of topic "everything you need..." , i think i use dvbapi (not sure) and setted that parameters. Then i use list from post: RE: OSCam-ICam For SKY IT, UK, DE
Oscam works well, but i can't open no one channel of icam bouquests. On some channels seems i'm conneted but always black screen.
I also tried to use again the oscam on the first post but with the same result.
Can i post a log to receive help? How to set up and where is the log file?
2023/08/17 07:05:07 6810DFDF c (ecm) dvbapiau (0960@000000/FFFF/17CB/B5:EAE17A87540131532E450XXXXX92F6D0): found (192 ms) by test (P/3/3/3) - SkySp Mix
2023/08/17 07:05:08 6810DFDF c (dvbapi) Demuxer 1 restarting decoding requests after 6 ms with 3 enabled and 0 disabled ecmpids!
2023/08/17 07:05:08 6810DFDF c (dvbapi) Demuxer 1 trying to descramble PID 2 CAID 0960 PROVID 000000 ECMPID 0502 ANY CHID PMTPID 0117 VPID 0203
2023/08/17 07:05:08 6810DFDF c (dvbapi) Demuxer 1 trying to descramble PID 1 CAID 0961 PROVID 000000 ECMPID 0502 ANY CHID PMTPID 0117 VPID 0203
2023/08/17 07:05:11 6810DFDF c (dvbapi) Demuxer 1 trying to descramble PID 0 CAID 0963 PROVID 000000 ECMPID 0502 ANY CHID PMTPID 0117 VPID 0203
I receive for sky it the key but my screen is always black. Whats wrong? I use oscam 11724. Caid 0960 is added in stream relay. Sky de works perfekt.
Hi samur , hi to all.
On Gigablue trio 4k, with OpenSpa 7.5.003, i've installed your last oscam 11724-798 (i think you can update compatibility list with trio 4k) renamed as Oscamicam. Followed the steps of topic "everything you need..." , i think i use dvbapi (not sure) and setted that parameters. Then i use list from post: RE: OSCam-ICam For SKY IT, UK, DE
Oscam works well, but i can't open no one channel of icam bouquests. On some channels seems i'm conneted but always black screen.
I also tried to use again the oscam on the first post but with the same result.
Can i post a log to receive help? How to set up and where is the log file?
on the same situation here. used the provided ipk (718) settings and conf, but always black. I mean DE. It was working before (so i'm excluding server side).
Channels with CAID 1843 are fine with provided ciefp icam list. Not tried IT and UK, which probably are down...
If someone can provide his working "config" folder cleaned by sensible data, I' ll copy/paste with my details and try.
Image and hardware in signature.
Thanks in advance all, this is only for study. :-)
catchmezzo it's not for you but there were a lot of before you...
Quote
I don't like cunning guys who are stupid at the same time.
from your log you are not using oscam from this thread...
;
Hi samur , hi to all.
On Gigablue trio 4k, with OpenSpa 7.5.003, i've installed your last oscam 11724-798 (i think you can update compatibility list with trio 4k) renamed as Oscamicam. Followed the steps of topic "everything you need..." , i think i use dvbapi (not sure) and setted that parameters. Then i use list from post: RE: OSCam-ICam For SKY IT, UK, DE
Oscam works well, but i can't open no one channel of icam bouquests. On some channels seems i'm conneted but always black screen.
I also tried to use again the oscam on the first post but with the same result.
Can i post a log to receive help? How to set up and where is the log file?
Now back to 11718-798:
2023/08/18 16:57:58 23F41125 c (ecm) anonymous (P: 09C4:000000:006E:1B0E:0BBD: #ECM_L:B7 #CW=00000000000000000000000000000000 HOP:01): not found (1 ms) by cline - Sky Atlantic HD - Sky DE (Icam)
2023/08/18 16:57:59 23F41125 c (ecm) anonymous (P: 098D:000000:006E:1C0E:0BBD: #ECM_L:B7 #CW=00000000000000000000000000000000 HOP:01): timeout (5001 ms) by cline (F/2/2/2) - Sky Atlantic HD - Sky DE (Icam)
2023/08/18 16:58:00 23F41125 c (ecm) anonymous (P: 098D:000000:006E:1C0E:0BBD: #ECM_L:B7 #CW=00000000000000000000000000000000 HOP:01): not found (1181 ms) by cline (F/2/2/2) - Sky Atlantic HD - Sky DE (Icam)
2023/08/18 16:58:00 23F41125 c (dvbapi) Demuxer 0 restarting decoding requests after 1 ms with 2 enabled and 2 disabled ecmpids!
2023/08/18 16:58:00 23F41125 c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 09C4 PROVID 000000 ECMPID 1B0E ANY CHID PMTPID 0064 VPID 04FF
2023/08/18 16:58:00 23F41125 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 098D PROVID 000000 ECMPID 1C0E ANY CHID PMTPID 0064 VPID 04FF
2023/08/18 16:58:00 23F41125 c (dvbapi) Demuxer 1 restarting decoding requests after 1 ms with 2 enabled and 2 disabled ecmpids!
2023/08/18 16:58:00 23F41125 c (dvbapi) Demuxer 1 trying to descramble PID 1 CAID 09C4 PROVID 000000 ECMPID 1B0E ANY CHID PMTPID 0064 VPID 04FF
2023/08/18 16:58:00 23F41125 c (dvbapi) Demuxer 1 trying to descramble PID 2 CAID 098D PROVID 000000 ECMPID 1C0E ANY CHID PMTPID 0064 VPID 04FF
2023/08/18 16:58:00 00000000 (emu) send_to_radegast send failure
Is it just a server problem? Or I made some mistakes configuring?
not found (1 ms) by cline - Sky Atlantic HD - Sky DE (Icam)
2023/08/18 16:57:59 23F41125 c (ecm) anonymous (P: 098D:000000:006E:1C0E:0BBD: #ECM_L:B7 #CW=00000000000000000000000000000000 HOP:01): timeout (5001 ms) by cline (F/2/2/2) - Sky Atlantic HD - Sky DE (Icam)
2023/08/18 16:58:00 23F41125 c (ecm) anonymous (P: 098D:000000:006E:1C0E:0BBD: #ECM_L:B7 #CW=00000000000000000000000000000000 HOP:01): not found
not found and timeout error means oscam tried the server and gave up after 5001ms because the channel wasn`t found on the server.
Its a server problem, basically they don`t have the channels you requested.
Nothing to do with configuration. The standard configs from the first post don`t need any configuration. Add reader to oscam.server file and that`s it.
Can i post a log to receive help? How to set up and where is the log file?
In the oscam webinterface > Live log.
Morning guys, what about my isssue here intead?
It seems found on server but black screen. Using ipk from this thread of course.
Using Duo2 with OpenATV 7.3 Aug 16th. only your ipk 718 installed.
For educational purpose only.
Hi samur , hi to all.
On Gigablue trio 4k, with OpenSpa 7.5.003, i've installed your last oscam 11724-798 (i think you can update compatibility list with trio 4k) renamed as Oscamicam. Followed the steps of topic "everything you need..." , i think i use dvbapi (not sure) and setted that parameters. Then i use list from post: RE: OSCam-ICam For SKY IT, UK, DE
Oscam works well, but i can't open no one channel of icam bouquests. On some channels seems i'm conneted but always black screen.
I also tried to use again the oscam on the first post but with the same result.
Can i post a log to receive help? How to set up and where is the log file?
Can you give me samur oscam in ipk for gigablue trio 4k reciver pls
Display MoreHi samur , hi to all.
On Gigablue trio 4k, with OpenSpa 7.5.003, i've installed your last oscam 11724-798 (i think you can update compatibility list with trio 4k) renamed as Oscamicam. Followed the steps of topic "everything you need..." , i think i use dvbapi (not sure) and setted that parameters. Then i use list from post: RE: OSCam-ICam For SKY IT, UK, DE
Oscam works well, but i can't open no one channel of icam bouquests. On some channels seems i'm conneted but always black screen.
I also tried to use again the oscam on the first post but with the same result.
Can i post a log to receive help? How to set up and where is the log file?
Can you give me samur oscam in ipk for gigablue trio 4k reciver pls
There is not ipk for version 11724: RE: OSCam For sf8008 and others [ boxes_Arch:arm ]
you can install ipk from the first post , then rename 11724 as that via ftp
I don't know the difference between libusb, libusb aio and libusb pcsc aio. Sorry, maybe someone else can teach us.
Thanks for all the info. Sky De is working fine but no luck with Sky It.
These are my configuration settings for streamrelay:
[streamrelay]
stream_ecm_delay = 5
stream_emm_enabled = 0
stream_relay_ctab = 098D,0960,0961,0963,0919,093B,09CD,0907
Is there anything to add for Sky It? Using Oscam 11718r798 and sometimes switch to 11724 but no difference to me.
Could not install ipk file in first post on newenigma2 image. I installed the file from Venus Panel. Is that the reason? I do not know how to install the seperate binary files submitted in first post.
Thanks.
Only a few channel work for Sky IT.
8 I think?
Some of these already open with other caids.
Because of this there are basically no cards being shared.
need updated " disablecrccws_only_for" list for 13e,28e,16e,19e,9e ..
for oscam 11724-emu
facing freezing
specially with 1884,0b01,1817,0100 caid.
In oscam.config global add
disablecrccws_only_for = 1
About freezing , I think that is better to look oscam.dvbapi and try to configure it ( add some caids as priority or ignore ).
Trying to launch sky uk in icam on DM920. Where are these options in dreamos ? :
Include ECM in HTTP streams - NO
Descramble HTTP streams - YES
Descramble received HTTP streams - NO
Load unlinked userbouquets - YES
I can't find these settings.
Looks like DM wants to decode 2x.
I get ERROR: stream client 0 got 502 response from stream source.
Find in setting system
Don’t have an account yet? Register yourself now and be a part of our community!