I have exactly the same problem.
I restarted the box via the switch on the back and it no longer wants to turn on, only the white button flashes.
Has anyone managed to solve this problem?
I have exactly the same problem.
I restarted the box via the switch on the back and it no longer wants to turn on, only the white button flashes.
Has anyone managed to solve this problem?
Hi
Where can I download the latest i-Cam channel list?
Thanks.
Hi.
Can anyone give me the 5-digit code for the remote control from VU plus so that it works with HISENSE TV?
According to the instructions 10772, 10753, 10752, 10302 and 10551 do not work.
Only the 10551 works off/on and muste, but VOL+/- does not work.
I would be grateful for help.
Using 2 remote controls is annoying.
I have found the cause.
It is the HDD or rather the timeshift.
Probably after the power was switched off, an error was stored on the timeshift, and now it is still trying to write it down or fix it (?).
Anyway, I want to delete the timeshift, but I cannot get into the timeshift directory after ftp (I use Total Commander).
Is there any option to get to the HDD and delete the file?
I don't have Linux and windows probably won't see the drive.
I have a problem with OBH 5.2 (latest version).
I have had 3x in a short period of time (about 2h) power outages, after the last one, the VU+ has been hanging on one channel with the wheel spinning for over 30 minutes.
I have access via ftp/telnet.
I tried restarting with init 6
After restart, still the same, I switched off at the back of the receiver for 10 sec. Nothing helps.
I should add that I wanted to upload the last backup image, but with the same result - one channel turns on, the wheel spins and hangs.
So I uploaded another image of Open ATV - everything is going ok, the tuner settings are ok, it sees the satellite, it performs the scan correctly, but when I switch on a channel (FTA), the circle appears and that's it.
Does this mean a physical fault with the receiver?
Any new news, can sly be fixed so it doesn't cut?
Is there an "Iperf" plugin available under Enigma2 Python3 ?
Thanks.
Another one for the English Premier League would be brilliant.
In my opinion, the best performer is C+ from position 23e
I know there will be PL (live) on these channels:
13e - Canal+ sport (it was recently announced that some PL matches will be given away to c+ streaming service ViaPlay) (Poland)
19e - DAZN (Spain)
23e - Canal+ (Czech and Slovak)
I really miss sky de where you could watch the PL without commentary with just the stadium.
But, where will be Bundesliga???
ps.
23e is worth setting up for ice hockey enthusiasts.
This is some solution, but IPTV for sport is not of the same quality as a satellite signal. Especially with fast changing images (football, ice hockey).
IPTV is OK for films, series ect.
This is very sad.
Because I won't be able to set up a SKY DE in the UK.
I don't want to replace my receiver (VU+ uno 4k SE) with some "junk" from SKY.
It was always going happen there will not be a lot left on Astra 19 east soon
What about Moviestar+ (ESP)?
About SKY DE
Does this mean that buying a new receiver no longer makes sense?
Is DE like UK, where SKY can only be watched on equipment supplied by SKY?
I just flash PurE2 6.5 [DM520}
And I have no network connection, where I can find driver for this USB WiFi card?
I will try to use the old router and set it up with DM520 HD :)
The whole problem is that I don't know how to force the DM520 to get the address from the computer after a hard connection.
I managed once, but can't remember what I did.
Anyway, I see that the problem is not in the DM520HD itself but in setting the computer to give the address via DHCP to the DM520.
OK, I use old router,
connect DM520 and PC with RJ45
DM520 find address instantly.
So, how to setting up PC without router to get same effect?
Unfortunately, this does not work.
I renamed the [PurE2] file from "dm520-PurE2-6.5-20220404.rootfs.tar.xz" to "dreambox-image-dm520.tar.xz".
I started Rescue mode - and just "waiting for DHCP"
About 15 min. nothing happen. I switch off and on and still is old image.
I tried to connect the cable directly with the laptop, but I can't get a connection.
Although once a few months I managed, but unfortunately I can't remember what I did then.
Ok, thanks I will try this!
Hi.
I try flash new image to my DM520 HD. But I stack in rescue mode with "waiting for DHCP" and never show any IP Adders.
I can't connect via router (is too far) so I decide to use laptop with Windows11
Thanks for any help.
Hi.
I will be make same new satellite project.
And I have question about configuration FBC tuner.
It will be 3 LNB (3 different satellite).
2xLNB Legacy witch DiSEqC connected to tuner A.
and Unicable to tuner B.
I would like to assign tuners:
A - 2x lnb 1 and 2x lnb 2
B - 4x unicable lnb 3
will it work?
Thanks.
What is more strange, it was working.
Yesterday was working with no problem.
I try other image Open ATV 7.0 and Open Vix - same problem.
I just wonder if it means faulty FBC tuner...
Is possible that faulty tuner, can't see just one transponder?
What image You can sugest?
I have Open BH.
Hi
I have problem with one transporter. When I try watch one of channel it says "tune failed".
I check in satellite signal, and all transponder 12264 from HB 13e signal is 0.
I take cable from tuner and connect to my satellite meter WS-6933.
Signal on this transponder is detected as:
S - 77%
Q - 37%
S/N - 7.7 dB
PWR: -30 dBm
Ber: 2.1E-01
Is my FBC tuner is faulty?
Thanks.