ok i have placed these configs in my oscam and replaced my old configs . the Softcam.keys file is in /etc/tuxbox/config/oscam/
i went to type the IP_of _your_box and go to settings >> customise >> and check the box Include ECM in http streams but the option is not there in openpli 6.0
i am also using
oscam-svn11391-openpli40-webif-emu (is that the correct one ?)
Would you recommend a different image or different oscam
i cant test that satellite as i am in Australia and out of range also my cband dish is honed into Intelsat19 and its fixed (no motor)
This is why i need at least one current key set for intelsat 19
no i didn't know that how do you do that . Also how do i know if the keys are correct and if tjey are in the correct format because of this
Also the constant.cw file could you please advise me if i still need that and if so what is the format for it please
I also wnet to my webif in openpli 6.0 and there is no option for the stream relay in the webif under customise
ok kool thankyou for that i have added my configs here . could you please tell me what i have done wrong and if i am missing anything Such as editing additional files. On the log now i am getting this
[global]
logfile = /dev/tty
clienttimeout = 4000
clientmaxidle = 300
netprio = 1
nice = -1
maxlogsize = 1000
waitforcards = 0
preferlocalcards = 1
dropdups = 1
[streamrelay]
stream_relay_enabled = 1
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
user = linuxsatsupport
read_sdt = 1
write_sdt_prov = 1
boxtype = dreambox
[webif]
httpport = 8888
httpuser = XXXXXXXX
httppwd = XXXXXXXXX
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255
http_status_log = 1
[newcamd]
port = 10001@4AD1:000000;0E00:000000;5604:000000;1861:000 000;0500:000000;1010:000000
key = 0102030405060708091011121314
mgclient = 1
keepalive = 1
[cccam]
port = 12000
version = 2.1.3
build = 3165
reshare = 1
[account]
description = dvbapi
user = linuxsatsupport
group = 1
[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000; 0500:000000,030B00,023800,021110,007400,007800;1801:000000,0 07301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000 ;4AE1:000011,000014,0000FE;1010:000000
emu_auproviders = 0500:030B00;0604:010200;0E00:000000;4AE1:000011,000014,0000FE
group = 1
[Softcam.keys]
30.05.2017 - Intelsat 19 @ 166.0E ECM
Discovery Networks Asia-Pacific
3980 H 30000-2/3
DVB-S2 8PSK
P 067C 00 874392CE8C3020FF
DSC Asia Pacific
P 067C 01 211214410FD467FF
DSC Asia Pacific
30.05.2017 - Intelsat 19 @ 166.0E ECM
Intelsat 3940 H 27690-7/8
DVB-S QPSK
P 067C 00 16DE199DA44BD4FF
ESPN / TV 5 Monde
P 067C 01 ACF70F8EB19865FF
ESPN / TV 5 Monde
30.05.2017 - Intelsat 19 @ 166.0E ECM
Discovery Networks Asia-Pacific
3760 V 30000-3/4 DVB-S2 8PSK
P 067C 00 874392CE8C3020FF
DSC Philippines
P 067C 01 211214410FD467FF
DSC Philippines
and the constant.cw file i have the same as the Softcam.keys.
ok i got the emu up and running now on openpli 6.0 in my dm800se but i am getting this now. (i am using oscam as softcam)
2016/06/08 17:46:21 342FD8C5 r (emu) Key not found: P 0586 01
2016/06/08 17:46:21 342FD8C5 r (emu) ECM failed: Key not found
2016/06/08 17:46:21 2C513ED9 c (ecm) linuxsatsupport (0E00@000000/0000/0586/40:7B77C03F9D2C96D5118FD3914539529A): not found (4 ms) by oscam_emu - Discovery New Zealand
am i missing a file or a config somewhere ? Please feel free to advise me .
[global]
logfile = /dev/tty
clienttimeout = 4000
clientmaxidle = 300
netprio = 1
nice = -1
maxlogsize = 1000
waitforcards = 0
preferlocalcards = 1
dropdups = 1
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
user = linuxsatsupport
read_sdt = 1
write_sdt_prov = 1
boxtype = dreambox
[webif]
httpport = 8888
httpuser = XXXXXXX
httppwd = XXXXXXXX
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255
[newcamd]
port = 10001@4AD1:000000;0E00:000000;5604:000000;1861:000 000;0500:000000;1010:000000
key = 0102030405060708091011121314
mgclient = 1
keepalive = 1
[cccam]
port = 12000
version = 2.1.3
build = 3165
reshare = 1
[account]
description = dvbapi
user = linuxsatsupport
group = 1
[reader]
label = oscam_emu
enable = 1
protocol = emu
device = emulator
caid = 4AD1,0E00,5604,1861,0500,1010
detect = cd
group = 1
thank you for that. Do I just copy and paste this as is into softcam.key file and reboot oscam
Could some kind person please advise me where i have gone wrong her or what i am missing i keep getting this error
(dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
and
c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
oscam log
Hi could anyone please help me with a current set of powervu keys for intelsat 19
ok kool well i removed the servers as you suggested and this is my log now. I am not exactly sure what is missing
i think the main error is
(dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
thankyou Master G i will try it now.
However could you please advise or help me to where can i get the powervu keys for Intelsat 19
Also should oscam be as cardserver or softcam or both
they are on my other post where i am asking for help. it works sort of just not clearing. i need current keys for intelsat 19.
do you have working configs . i have dm800se and oscam opens as does webif but my configs to get it working are no good . i am trying to clear powervu on intelsat19
here is a oscam bin file that works on DM800SE
Hi there
have been trying to open Powervu Channels on intelsat19 with no luck using my Dm800se.
If anyone could please have a look at my log and my configs which are attached below and help me i would be so grateful.
Thanking you in advance
thanks for that rickk i have already tried this ages ago i just tried it again and still not clearing.
From what Master G said there is no public fix for NDS that he is aware of.
Unless you know otherwise please feel free to pm me.
no worries thankyou for replying and trying to help anyway
cheers
is there anyway to get the cwpk
would it work then ?
that was the cccam.cfg which has
N: localhost 2001 foxtel foxtel 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 192.168.0.5 2001 dm800a update 01 02 03 04 05 06 07 08 09 10 11 12 13 14
and when i tried with mgcamd in the newcamd.list file i had
CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = localhost 2001 foxtel foxtel 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = 192.168.0.5 2001 dm800a update 01 02 03 04 05 06 07 08 09 10 11 12 13 14
and in the mg_cfg file i had
01 under G
i'm sorry my apologies, here is my log and my configs , they are all on the one txt file.
i have attached below
Also could you please advise if i should be using mgcamd or ccam and if so which version has been proven to work.
i have tried mgcamd 1.35a and 1.38 and for cccam i have tried 2.3.0 , 2.2.1 and 2.1.3
The only one which gives "ACTIVE" and updates the "written" section in readers is the mgcamd both versions
The cccam versions only update the "ok" section
Regardless I still black screen. Am not sure what i am missing.
Any advice would be so much appreciated
Hi there was hoping somebody could please advise me with orange NDS card 096C i was getting on oscam the following message
classD3 ins54: no cw --> Card needs pairing/extra data
After I placed boxid card initialised and had no more errors. Oscam looks like its working and updating but i have black screen
Any help or advise to get past this would be greatly appreciated.
Version of oscam i am using is r11391 in a linux ubuntu machine and using cccam 2.3.0 with dm800se receiver with nline as au
Please feel free to pm me if you could possibly advice what i am missing and maybe help me.
Thanking you in advance
Hi there
I am running oscam 1.20 on linux pc with smargo and have 2 connected clients connected, one being a dm800se with mgcamd 1.35a as updater and the other which is an ultraplus 980hd as just a client with mgcamd also
everything on oscam seems to look as if its working ok and should be clearing but all i have is black screens. I can't help but think am missing something simple which i just cant put my finger on. Anyy help or advise would be so much appreciated as i have been racking my brain and going round the bend on this.
Here are my configs if anyone would be kind enough to give some advice
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sun Jan 1 02:05:54 2017
-------------------------------------------------------------------------------
2017/01/01 02:05:54 0 s starting thread log_list_thread
2017/01/01 02:05:54 0 s log_list_thread thread started
2017/01/01 02:05:54 0 s >> OSCam << cardserver started, version 1.20-Tweaked anti-Surflock--Pairing, build #7238 (x86_64-linux-gnu)
2017/01/01 02:05:54 0 s version=1.20-Tweaked anti-Surflock--Pairing, build #7238, system=x86_64-linux-gnu, nice=-19
2017/01/01 02:05:54 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
2017/01/01 02:05:54 0 s max. logsize=10000 Kb, loghistorysize=4096 bytes
2017/01/01 02:05:54 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2017/01/01 02:05:54 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2017/01/01 02:05:54 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2017/01/01 02:05:54 0 s signal handling initialized (type=sysv)
2017/01/01 02:05:54 0 s 884 service-id's loaded in 0ms
2017/01/01 02:05:54 0 s 14 tier-id's loaded
2017/01/01 02:05:54 0 s 5 provid's loaded
2017/01/01 02:05:54 0 s 5 entries read from oscam.whitelist
2017/01/01 02:05:54 0 s 1 entries read from oscam.cacheex
2017/01/01 02:05:54 0 s Starting listener 0
2017/01/01 02:05:54 0 s monitor: initialized (fd=5, port=988)
2017/01/01 02:05:54 0 s Starting listener 0
2017/01/01 02:05:54 0 s camd35: disabled
2017/01/01 02:05:54 0 s Starting listener 0
2017/01/01 02:05:54 0 s cs378x: disabled
2017/01/01 02:05:54 0 s Starting listener 0
2017/01/01 02:05:54 0 s newcamd: initialized (fd=6, port=34000, crypted)
2017/01/01 02:05:54 0 s -> CAID: 096C PROVID: 000000
2017/01/01 02:05:54 0 s Starting listener 0
2017/01/01 02:05:54 0 s pandora: disabled
2017/01/01 02:05:54 0 s Starting listener 0
2017/01/01 02:05:54 0 s csp: disabled
2017/01/01 02:05:54 0 s Starting listener 0
2017/01/01 02:05:54 0 s radegast: disabled
2017/01/01 02:05:54 0 s starting thread http
2017/01/01 02:05:54 0 s http thread started
2017/01/01 02:05:54 0 s starting thread reader check
2017/01/01 02:05:54 0 s reader check thread started
2017/01/01 02:05:54 0 s starting thread check
2017/01/01 02:05:54 0 s check thread started
2017/01/01 02:05:54 0 s foxtel [smargo] creating thread for device /dev/ttyUSB0
2017/01/01 02:05:54 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2017/01/01 02:05:54 0 s waiting for local card init
2017/01/01 02:05:54 F40008C0 h HTTP Server listening on port 8888
2017/01/01 02:05:54 19463D0 r foxtel [smargo] smargo init
2017/01/01 02:05:54 19463D0 r foxtel [smargo] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=537, cardmhz=600)
2017/01/01 02:05:55 19463D0 r foxtel [smargo] card detected
2017/01/01 02:05:59 19463D0 r foxtel [smargo] ATR: 3F FD 11 25 02 50 80 0F 41 B0 03 69 FF 4A 50 F0 80 00 46 44 03
2017/01/01 02:06:00 19463D0 r foxtel [smargo] Maximum frequency for this card is formally 5 Mhz, clocking it to 5.37 Mhz
2017/01/01 02:06:01 19463D0 r foxtel [smargo] parental lock setting: FF 7F 00 00
2017/01/01 02:06:01 19463D0 r foxtel [smargo] type: VideoGuard Foxtel Australia (096C), caid: 096C
2017/01/01 02:06:01 19463D0 r foxtel [smargo] serial: ########, BoxID: ########, baseyear: 2000
2017/01/01 02:06:01 19463D0 r foxtel [smargo] ready for requests
2017/01/01 02:06:01 19463D0 r foxtel [smargo] found cardsystem videoguard2
2017/01/01 02:06:01 19463D0 r foxtel [videoguard2] card detected
2017/01/01 02:06:01 19463D0 r foxtel [videoguard2] type: VideoGuard Foxtel Australia (096C)
2017/01/01 02:06:02 19463D0 r foxtel [videoguard2] tier: 0021, expiry date: 2017/02/11-00:00:00
2017/01/01 02:06:02 19463D0 r foxtel [videoguard2] tier: 0033, expiry date: 2017/02/11-00:00:00
2017/01/01 02:06:02 19463D0 r foxtel [videoguard2] tier: 0034, expiry date: 2017/02/11-00:00:00
2017/01/01 02:06:02 19463D0 r foxtel [videoguard2] tier: 0035, expiry date: 2017/02/11-00:00:00
2017/01/01 02:06:02 19463D0 r foxtel [videoguard2] tier: 0036, expiry date: 2017/02/11-00:00:00
2017/01/01 02:06:02 19463D0 r foxtel [videoguard2] tier: 0037, expiry date: 2017/02/11-00:00:00
2017/01/01 02:06:02 19463D0 r foxtel [videoguard2] tier: 0038, expiry date: 2017/02/11-00:00:00
2017/01/01 02:06:02 19463D0 r foxtel [videoguard2] tier: 0039, expiry date: 2017/02/11-00:00:00
2017/01/01 02:06:02 19463D0 r foxtel [videoguard2] tier: 003a, expiry date: 2017/02/11-00:00:00
2017/01/01 02:06:02 19463D0 r foxtel [videoguard2] tier: 007d, expiry date: 2017/02/11-00:00:00
2017/01/01 02:06:02 19463D0 r foxtel [videoguard2] tier: 007e, expiry date: 2017/02/11-00:00:00
2017/01/01 02:06:02 19463D0 r foxtel [videoguard2] tier: 007f, expiry date: 2017/02/11-00:00:00
2017/01/01 02:06:02 19463D0 r foxtel [videoguard2] tier: 0400, expiry date: 2017/02/11-00:00:00
2017/01/01 02:06:02 19463D0 r foxtel [videoguard2] tier: 0404, expiry date: 2017/02/11-00:00:00
2017/01/01 02:06:02 0 s init for all local cards done
2017/01/01 02:06:02 0 s anti cascading disabled
2017/01/01 02:06:02 196D730 c client connected to 34000 port
2017/01/01 02:06:02 196F110 c client connected to 34000 port
2017/01/01 02:06:02 196D730 c encrypted newcamd:34000-client 192.168.0.125 granted (dm800f, au=on (1 reader))
2017/01/01 02:06:02 196D730 c user dm800f authenticated successfully (mgcamd)
2017/01/01 02:06:02 196D730 c AU enabled for user dm800f on reader foxtel
2017/01/01 02:06:02 196F110 c encrypted newcamd:34000-client 192.168.0.131 granted (muzzy, au=off)
2017/01/01 02:06:02 196F110 c user muzzy authenticated successfully (mgcamd)
2017/01/01 02:06:02 196F110 c AU disabled for user muzzy
2017/01/01 02:06:02 196D730 c SID list will not be send to mgcamd client.
2017/01/01 02:06:02 196F110 c SID list will not be send to mgcamd client.
2017/01/01 02:06:03 196D730 c starting thread housekeeping lb stats
2017/01/01 02:06:03 196D730 c housekeeping lb stats thread started
2017/01/01 02:06:03 196D730 c dm800f (096C&000000/0000/07D7/85:8F86): found (324 ms) by foxtel - Discovery
2017/01/01 02:06:05 196F110 c muzzy (096C&000000/0000/03F0/85:6616): found (248 ms) by foxtel - FOX8
2017/01/01 02:06:05 196F110 c muzzy (096C&000000/0000/03F0/85:2632): found (248 ms) by foxtel - FOX8
2017/01/01 02:06:13 196D730 c dm800f (096C&000000/0000/07D7/85:ED53): found (248 ms) by foxtel - Discovery
2017/01/01 02:06:15 196F110 c muzzy (096C&000000/0000/03F0/85:0464): found (248 ms) by foxtel - FOX8
2017/01/01 02:06:23 196D730 c dm800f (096C&000000/0000/07D7/85:91C9): found (249 ms) by foxtel - Discovery
2017/01/01 02:06:25 196F110 c muzzy (096C&000000/0000/03F0/85:60AF): found (249 ms) by foxtel - FOX8
2017/01/01 02:06:33 196D730 c dm800f (096C&000000/0000/07D7/85:FAB5): found (248 ms) by foxtel - Discovery
2017/01/01 02:06:35 196F110 c muzzy (096C&000000/0000/03F0/85:3D54): found (248 ms) by foxtel - FOX8
2017/01/01 02:06:43 196D730 c dm800f (096C&000000/0000/07D7/85:5558): found (248 ms) by foxtel - Discovery
2017/01/01 02:06:45 196F110 c muzzy (096C&000000/0000/03F0/85:9EE3): found (249 ms) by foxtel - FOX8
2017/01/01 02:06:53 196D730 c dm800f (096C&000000/0000/07D7/85:CD12): found (249 ms) by foxtel - Discovery
2017/01/01 02:06:55 196F110 c muzzy (096C&000000/0000/03F0/85:1DE5): found (249 ms) by foxtel - FOX8
2017/01/01 02:07:03 196D730 c dm800f (096C&000000/0000/07D7/85:8587): found (249 ms) by foxtel - Discovery
2017/01/01 02:07:05 196F110 c muzzy (096C&000000/0000/03F0/85:B8FA): found (249 ms) by foxtel - FOX8
2017/01/01 02:07:13 196D730 c dm800f (096C&000000/0000/07D7/85:FE24): found (255 ms) by foxtel - Discovery
2017/01/01 02:07:15 196F110 c muzzy (096C&000000/0000/03F0/85:BAD7): found (248 ms) by foxtel - FOX8
2017/01/01 02:07:23 196D730 c dm800f (096C&000000/0000/07D7/85:68B1): found (249 ms) by foxtel - Discovery
2017/01/01 02:07:25 196F110 c muzzy (096C&000000/0000/03F0/85:AA9E): found (249 ms) by foxtel - FOX8
2017/01/01 02:07:33 196D730 c dm800f (096C&000000/0000/07D7/85:7355): found (249 ms) by foxtel - Discovery
2017/01/01 02:07:35 196F110 c muzzy (096C&000000/0000/03F0/85:9738): found (248 ms) by foxtel - FOX8
2017/01/01 02:07:43 196D730 c dm800f (096C&000000/0000/07D7/85:C743): found (357 ms) by foxtel - Discovery
2017/01/01 02:07:45 196F110 c muzzy (096C&000000/0000/03F0/85:3BB4): found (248 ms) by foxtel - FOX8
2017/01/01 02:07:53 196D730 c dm800f (096C&000000/0000/07D7/85:F49B): found (249 ms) by foxtel - Discovery
2017/01/01 02:07:55 196F110 c muzzy (096C&000000/0000/03F0/85:0CBE): found (248 ms) by foxtel - FOX8
2017/01/01 02:08:03 196D730 c dm800f (096C&000000/0000/07D7/85:04ED): found (249 ms) by foxtel - Discovery
2017/01/01 02:08:05 196F110 c muzzy (096C&000000/0000/03F0/85:BAE2): found (249 ms) by foxtel - FOX8
2017/01/01 02:08:13 196D730 c dm800f (096C&000000/0000/07D7/85:530C): found (249 ms) by foxtel - Discovery
2017/01/01 02:08:15 196F110 c muzzy (096C&000000/0000/03F0/85:A4E3): found (269 ms) by foxtel - FOX8
2017/01/01 02:08:23 196D730 c dm800f (096C&000000/0000/07D7/85:2045): found (248 ms) by foxtel - Discovery
2017/01/01 02:08:25 196F110 c muzzy (096C&000000/0000/03F0/85:F4D3): found (253 ms) by foxtel - FOX8
2017/01/01 02:08:33 196D730 c dm800f (096C&000000/0000/07D7/85:6EB6): found (252 ms) by foxtel - Discovery
2017/01/01 02:08:35 196F110 c muzzy (096C&000000/0000/03F0/85:913E): found (249 ms) by foxtel - FOX8
2017/01/01 02:08:43 196D730 c dm800f (096C&000000/0000/07D7/85:8866): found (249 ms) by foxtel - Discovery
2017/01/01 02:08:45 196F110 c muzzy (096C&000000/0000/03F0/85:DF2D): found (248 ms) by foxtel - FOX8
#Oscam.conf
[global]
logfile = /tmp/oscam.log
emmlogdir = /tmp/emm.log
nice = -19
maxlogsize = 10000
preferlocalcards = 1
lb_mode = 1
lb_savepath =
lb_reopen_mode = 1
[monitor]
port = 988
nocrypt = 127.0.0.1
monlevel = 4
appendchaninfo = 1
[newcamd]
key = 0102030405060708091011121314
port = 34000@096C:000000
[webif]
httpport = 8888
httpuser = *******
httppwd = *******
httprefresh = 15
httpallowed = 0.0.0.0-255.255.255.255
httphideidleclients = 1
#Oscam.user
[account]
user = dm800f
pwd = update
monlevel = 4
group = 1
au = foxtel
keepalive = 1
[account]
user = muzzy
pwd = muzzy
monlevel = 4
group = 1
keepalive = 1
#Oscam.server
[reader]
label = foxtel
protocol = smargo
device = /dev/ttyUSB0
caid = 096C
boxid = ********
detect = cd
key = 0102030405060708091011121314
mhz = 537
cardmhz = 600
ident = 096C:000000
group = 1
#Oscam.srvid
#
########### Orange Foxtel NDS(Australia) ##############
#
96C:2EE1|Foxtel|[V] HITS|
96C:59DA|Foxtel|111 HITS+2|
96C:1B5D|Foxtel|13TH STREET|
96C:3A9A|Foxtel|13TH STREET+2|
96C:36B6|Foxtel|3D CHANNEL|
96C:36CA|Foxtel|3D CHANNEL|
96C:59DF|Foxtel|7TWO|
96C:59E0|Foxtel|7TWO|
96C:59E1|Foxtel|7TWO|
96C:232F|Foxtel|A&E|
96C:4E27|Foxtel|A&E HD|
96C:4E3B|Foxtel|A&E HD|
96C:7D0B|Foxtel|ABC News24 HD|
96C:80E9|Foxtel|ABC1|
96C:80EA|Foxtel|ABC1|
96C:80EE|Foxtel|ABC1|
96C:80ED|Foxtel|ABC1|
96C:80EF|Foxtel|ABC1|
96C:80EC|Foxtel|ABC1|
96C:80F0|Foxtel|ABC2 / ABC4|
96C:80F1|Foxtel|ABC3|
96C:7D06|Foxtel|ACC|
96C:1B5B|Foxtel|ActionAdv|
96C:36C9|Foxtel|ActionAdv HD|
96C:36B5|Foxtel|ActionAdv HD|
96C:2718|Foxtel|Adults Only 1|
96C:2719|Foxtel|Adults Only 2|
96C:4A43|Foxtel|air|
96C:7D0C|Foxtel|Al Jazeera|
96C:0FA5|Foxtel|Animal Planet|
96C:0FA2|Foxtel|Antenna|
96C:55F5|Foxtel|A-PAC|
96C:03ED|Foxtel|ARENA|
96C:4655|Foxtel|ARENA +2|
96C:55F6|Foxtel|AURORA|
96C:3E94|Foxtel|AUSA|
96C:3AA2|Foxtel|BBC CBeebies|
96C:4E3A|Foxtel|BBC Know HD|
96C:4E26|Foxtel|BBC Know HD|
96C:55F8|Foxtel|BBC Knowledge|
96C:1389|Foxtel|BBC Wld News|
96C:0FA8|Foxtel|Bio.|
96C:0FA4|Foxtel|Bloomberg|
96C:0BBD|Foxtel|Boomerang|
96C:2EE7|Foxtel|Cartoon|
96C:7D09|Foxtel|CCTV NEWS|
96C:138D|Foxtel|Channel [V]|
96C:791B|Foxtel|Channel 10|
96C:7919|Foxtel|Channel 10|
96C:791E|Foxtel|Channel 10|
96C:791F|Foxtel|Channel 7|
96C:7920|Foxtel|Channel 7|
96C:7921|Foxtel|Channel 7|
96C:791D|Foxtel|Channel 9|
96C:791A|Foxtel|Channel 9|
96C:791C|Foxtel|Channel 9|
96C:4656|Foxtel|Classics +2|
96C:3AA0|Foxtel|CNBC|
96C:0BBF|Foxtel|CNN|
96C:1B5A|Foxtel|Comedy|
96C:4653|Foxtel|Comedy Ch +2|
96C:03EB|Foxtel|Comedy Channel|
96C:4E23|Foxtel|Comedy HD|
96C:4E37|Foxtel|Comedy HD|
96C:2EE6|Foxtel|Country Music|
96C:1390|Foxtel|Crime|
96C:564B|Foxtel|DAL 1|
96C:564C|Foxtel|DAL 2|
96C:564D|Foxtel|DAL 3|
96C:564E|Foxtel|DAL 4|
96C:55F9|Foxtel|DAL M|
96C:2EE5|Foxtel|Disc Health|
96C:2EE9|Foxtel|Disc Science|
96C:2AFD|Foxtel|Disc Turbo|
96C:59DE|Foxtel|Disc Turbo+2|
96C:07D7|Foxtel|Discovery|
96C:1B62|Foxtel|Discovery +2|
96C:32CB|Foxtel|Discovery HD|
96C:32DF|Foxtel|Discovery HD|
96C:138C|Foxtel|Disney|
96C:2B00|Foxtel|Disney Junior|
96C:1B5C|Foxtel|DramaRom|
96C:4E24|Foxtel|DramaRom HD|
96C:4E38|Foxtel|DramaRom HD|
96C:2EE8|Foxtel|E!|
96C:84D3|Foxtel|ELEVEN|
96C:84D2|Foxtel|ELEVEN|
96C:84D1|Foxtel|ELEVEN|
96C:4279|Foxtel|EPG Background Audio|
96C:0FA9|Foxtel|ESPN|
96C:32CE|Foxtel|ESPN HD|
96C:32E2|Foxtel|ESPN HD|
96C:1B61|Foxtel|ESPN2|
96C:32C9|Foxtel|ESPN2 HD|
96C:32DD|Foxtel|ESPN2 HD|
96C:1B5F|Foxtel|Eurosport|
96C:2EE4|Foxtel|Eurosportnews|
96C:4A39|Foxtel|EXPO|
96C:3AA1|Foxtel|EXPO|
96C:2AF9|Foxtel|Family|
96C:61C1|Foxtel|Family HD|
96C:61AD|Foxtel|Family HD|
96C:0FA7|Foxtel|Food|
96C:59DC|Foxtel|Food +2|
96C:03EE|Foxtel|FOX Classics|
96C:3A9C|Foxtel|FOX FOOTY|
96C:61AE|Foxtel|FOX FOOTY HD|
96C:61C2|Foxtel|FOX FOOTY HD|
96C:0FA3|Foxtel|FOX News|
96C:0BB9|Foxtel|FOX Sports 1|
96C:4E25|Foxtel|Fox Sports 1HD|
96C:4E39|Foxtel|Fox Sports 1HD|
96C:0BBA|Foxtel|FOX Sports 2|
96C:32CD|Foxtel|Fox Sports 2HD|
96C:32E1|Foxtel|Fox Sports 2HD|
96C:07D5|Foxtel|FOX Sports 3|
96C:36B1|Foxtel|Fox Sports 3HD|
96C:36C5|Foxtel|Fox Sports 3HD|
96C:0BBB|Foxtel|FOX SPORTS NEWS|
96C:3E86|Foxtel|FOX Sports Plus|
96C:03F0|Foxtel|FOX8|
96C:4658|Foxtel|FOX8 +2|
96C:32E0|Foxtel|FOX8 HD|
96C:32CC|Foxtel|FOX8 HD|
96C:0BC1|Foxtel|FoxSportsNews|
96C:138F|Foxtel|FUEL TV|
96C:07DA|Foxtel|FX|
96C:3A9B|Foxtel|FX +2|
96C:36CB|Foxtel|FX HD|
96C:36B7|Foxtel|FX HD|
96C:59D9|Foxtel|GO!|
96C:59DD|Foxtel|GO!|
96C:59E2|Foxtel|GO!|
96C:0CF4|SkyChannel|HD Test|
96C:4A4C|Foxtel|Help|
96C:426D|Foxtel|Help|
96C:07D9|Foxtel|History|
96C:55F7|Foxtel|HITS|
96C:000A|0|INFO|
96C:012D|OP|INFO 156°E|
96C:000C|Optus|INFO 2|
96C:2AFC|Foxtel|KidsCo|
96C:03F1|Foxtel|LifeStyle|
96C:4659|Foxtel|LifeStyle +2|
96C:61AC|Foxtel|LifeStyle HD|
96C:61C0|Foxtel|LifeStyle HD|
96C:55FA|Foxtel|LifeStyle Home|
96C:1B59|Foxtel|LifeStyle YOU|
96C:59DB|Foxtel|LifeStyle YOU 2|
96C:0BBC|Foxtel|Main Event|
96C:07D3|Foxtel|Masterpiece|
96C:61C3|Foxtel|Masterpiece HD|
96C:61AF|Foxtel|Masterpiece HD|
96C:1392|Foxtel|MAX|
96C:2EE2|Foxtel|Movies Preview|
96C:2EF3|Foxtel|Movies Preview|
96C:2EF2|Foxtel|Movies Preview|
96C:2F46|Foxtel|Movies Preview|
96C:1391|Foxtel|MTV|
96C:138B|Foxtel|MTV Classic|
96C:2331|Foxtel|MTV Hits|
96C:1B60|Foxtel|MTV Live|
96C:61AB|Foxtel|MTV Live HD|
96C:61BF|Foxtel|MTV Live HD|
96C:07D8|Foxtel|Nat Geo|
96C:3A99|Foxtel|Nat Geo +2|
96C:36B2|Foxtel|Nat Geo HD|
96C:36C6|Foxtel|Nat Geo HD|
96C:2AFA|Foxtel|Nat Geo Wild|
96C:61BE|Foxtel|NatGeoWild HD|
96C:61AA|Foxtel|NatGeoWild HD|
96C:2EE3|Foxtel|NG Adventure|
96C:2EEA|Foxtel|Nick Jr|
96C:07D1|Foxtel|Nickelodeon|
96C:7D05|Foxtel|NITV|
96C:2711|Foxtel|On Demand 01|
96C:2712|Foxtel|On Demand 02|
96C:2713|Foxtel|On Demand 03|
96C:2714|Foxtel|On Demand 04|
96C:2715|Foxtel|On Demand 05|
96C:2716|Foxtel|On Demand 06|
96C:2717|Foxtel|On Demand 07|
96C:271A|Foxtel|On Demand 08|
96C:2329|Foxtel|On Demand 09|
96C:232A|Foxtel|On Demand 10|
96C:232B|Foxtel|On Demand 11|
96C:232C|Foxtel|On Demand 12|
96C:232D|Foxtel|On Demand 13|
96C:232E|Foxtel|On Demand 14|
96C:32CA|Foxtel|On Demand 15|
96C:4274|Foxtel|On Demand 16|
96C:426B|Foxtel|On Demand 17|
96C:03EA|Foxtel|Premiere|
96C:4652|Foxtel|Premiere +2|
96C:4E35|Foxtel|Premiere HD|
96C:4E21|Foxtel|Premiere HD|
96C:0FA1|Foxtel|RAI|
96C:4A3C|Foxtel|SATest|
96C:7D03|Foxtel|SBS ONE|
96C:7D02|Foxtel|SBS ONE|
96C:7D01|Foxtel|SBS TWO|
96C:7D04|Foxtel|Setanta Sports|
96C:2EF1|Foxtel|Setanta Sports|
96C:138E|Foxtel|SF (Sci Fi)|
96C:2B02|Foxtel|SF +2 (Sci Fi)|
96C:03F3|Foxtel|showcase|
96C:465B|Foxtel|showcase +2|
96C:4E22|Foxtel|showcase HD|
96C:4E36|Foxtel|showcase HD|
96C:55F3|Foxtel|SKY Business|
96C:55F1|Foxtel|SKY News|
96C:3AA7|Foxtel|Sky Racing Active|
96C:3AAA|Foxtel|Sky Racing1|
96C:3AAB|Foxtel|Sky Racing1|
96C:3A9D|Foxtel|Sky Racing1|
96C:3AA8|Foxtel|Sky Racing2|
96C:3A9E|Foxtel|Sky Racing2|
96C:3A9F|Foxtel|SkyRacingWorld|
96C:3AA9|Foxtel|SkyRacingWorld|
96C:03F2|Foxtel|SoHo|
96C:465A|Foxtel|SoHo +2|
96C:36C8|Foxtel|SoHo HD|
96C:36B4|Foxtel|SoHo HD|
96C:3E81|Foxtel|SPA|
96C:1B5E|Foxtel|Spare|
96C:2AFF|Foxtel|Spare|
96C:4657|Foxtel|Spare|
96C:03EF|Foxtel|Spare|
96C:3E84|Foxtel|SPB|
96C:2AFB|Foxtel|SPEED|
96C:61A9|Foxtel|SPEED HD|
96C:61BD|Foxtel|SPEED HD|
96C:3E83|Foxtel|SPH|
96C:3E82|Foxtel|SPM|
96C:3E85|Foxtel|SPW|
96C:0BBE|Foxtel|STUDIO|
96C:2AFE|Foxtel|Style|
96C:138A|Foxtel|TCM|
96C:07D2|Foxtel|ThrillerCrime|
96C:32E3|Foxtel|ThrillerCrime HD|
96C:32CF|Foxtel|ThrillerCrime HD|
96C:2B01|Foxtel|TLC|
96C:2332|Foxtel|TLC +2|
96C:4A44|Foxtel|Top Picks|
96C:03E9|Foxtel|TV1|
96C:4651|Foxtel|TV1 +2|
96C:7D07|Foxtel|TVN|
96C:0BC0|Foxtel|TVSN|
96C:03EC|Foxtel|UKTV|
96C:4654|Foxtel|UKTV +2|
96C:36C7|Foxtel|UKTV HD|
96C:36B3|Foxtel|UKTV HD|
96C:07D6|Foxtel|Universal|
96C:0FA6|Foxtel|Weather|
96C:0FB3|Foxtel|WEATHER ACTIVE|
96C:07D4|Foxtel|World Movies|
#
#Oscam.provid
096c:000000|Foxtel-NDS2|Optus 156E C1/D3|English
#Oscam.tiers
0021:0000|my TIER 1
0033:0000|my TIER 2
0034:0000|my TIER 3
0035:0000|my TIER 4
0036:0000|my TIER 5
0037:0000|my TIER 6
0038:0000|my TIER 7
0039:0000|my TIER 8
003a:0000|my TIER 9
007d:0000|my TIER 10
007e:0000|my TIER 11
007f:0000|my TIER 12
0400:0000|my TIER 13
0404:0000|my TIER 14
#Oscam.whitelist
#
# whitelist table
#
# format:
#
# whitelist:
# w:[CAID][:][provider ID][:][service ID][:][ECM PID][:][CHID][:][ECM length 1][,ECM length 2]...
#
# whitelist, not proceed with any other ECM length whitelisting when matching:
# l:[CAID][:][provider ID][:][service ID][:][ECM PID][:][CHID][:][ECM length 1][,ECM length 2]...
#
# ignore:
# i:[CAID][:][provider ID][:][service ID][:][ECM PID][:][CHID][:][ECM length 1][,ECM length 2]...
#
w:0100 # whitelisting for CAID 0100
w:096C
i:0200:1234 # ignore CAID 0200 with service ID 1234
i:::::2345 # ignore CHID 2345
w: # allow all others (blacklist)
l:0300 # whitelisting for CAID 0300 not proceeding
# if matching
#Newcamd.list for DM800se (update box)
CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = 192.168.0.12 34000 dm800f update 0102030405060708091011121314
#mg_cfg for DM800se (update box)
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
U: { 07 }
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
G: { 33 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 10
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 5 }
# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 00 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
# L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 04 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 00 }
#Newcamd.list for Ultraplus 980HD (client box)
CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = 192.168.0.12 34000 muzzy muzzy 0102030405060708091011121314
#mg_cfg for Ultraplus (980hd client box)
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 03 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 00 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
G: { 33 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 05 } 5 30
# network ecm timeout in seconds
K: { 1 }
# newcamd dead routes connect retry, sec
Q: { 01 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 newcamd, camd3, gbox, radegast
# 02 newcamd, camd3, radegast, cccamd, gbox
P: { 01 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } root ----
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 192.---.---.--- 514 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 00 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 12 }
F: { 00 }
As mentioned above any help would be so much appreciated. Thanking you in advance for any kind person who can lend assistance in this. PMs are also very welcome . :-)
