Hi.
Can anyone help me.
I installed OSTool on an android box and put it to start.
The android box ip and port appears.
I put the ip and the port in the browser on the pc the error does not open.
Any ideas how to configure OStool?
Hi.
Can anyone help me.
I installed OSTool on an android box and put it to start.
The android box ip and port appears.
I put the ip and the port in the browser on the pc the error does not open.
Any ideas how to configure OStool?
Hi.
I have an enigma 2 octagon and I installed satip.
On an android box I installed the sat ip viewer application and it detects the octagon and searches for channels but does not open.
Can anyone help me configure it please?
Put the sat ip server octagon and see in the android box
When you look at the oscam webinterface on the server can you see the client box making a connection?
If your provider doesn`t allow resharing the server won`t be able to share anything to the client box.
So that just might be it.
The provider does not allow sharing.
Because I did as you said I put in oscam.conf the port 12000 and in oscam.user I created the account "user,pwd,group".
Then in the client box I created the line c: ip of the server box 12000 local receiver and did not open anything.
How do I know if the provider allows sharing?
Hello Friend
I did exactly as you said.
I put the parameters in oscam.conf and oscam.user, then in the client box I put the c: ip line from the server box 12000 local receiver
and nothing opens.
Display MoreMas ninguém sabe que estou re-compartilhando?
Seu provedor poderá ver o tráfego extra ou o login duplo. Se você não tiver um novo compartilhamento, seu cliente não poderá ver nada e sua linha/compartilhamento provavelmente será desabilitada.
A única coisa que posso mudar é a porta cccam e newcamd?
Correto. Também seu próprio usuário e senha em [conta], mas você pode usar o meu como exemplo.
A chave newcamd é a que você disse para colocar?
Sim, você pode alterá-lo para o seu próprio, mas não complique as coisas.
Thank you for your help.
Em
Como vejo na caixa do servidor o que está sendo visto na caixa do cliente?
Usando a interface web oscam.
Em oscam.conf procure por [webif] e o httpport
Em um navegador digite o endereço IP do servidor seguido do : httpport - exemplo:192.168.1.100 : 8888
Thank you very much.
Tomorrow I will express.
But no one knows I'm re-sharing?
The only thing I can change is the cccam port and newcamd?
Is the newcamd key the one you said to put?
Em
Correct. Have a separate group on each reader, example: group = 1 & group = 2.
If you want the account to access the reader with group 1, add group = 1 or if you want it to access reader with group 2, add group = 2
If you want the account to access both readers add group = 1,2
great, i figured it out.
And is there a way on the server box to be able to see what the client box is seeing?
How do I see in the server box what is being seen in the client box?
Em
Display Morebut if I want to share only one line that I have in oscam.server, how do I do it?
Whatever you are allowed to reshare will automatically be passed to the client.
The [reader] and [account] must have a group that match - example: group =1
Are the parameters in oscam.conf for the newcamd line the ones you put?
Yes they are example parameters that you should just copy and paste into oscam.conf
Are these key and door?
Dunno what this means.
for example if you have 2 lines on oscam server but if you only want to share one line, just put it in the group field?
If the line I want to share is from group 1 in user meto group 1 and only that one is shared?
Display Morejust put these parameters in oscam.conf and oscam.user and then in the receiver box put the C line?
Correct.
And for newcamd lines how do I?
Add the newcamd protocol to oscam.conf.
Change the port (34000) to what whatever you want to use for the newcamd protocol.
Add an account in oscam.user just like you did for CCcam client.
N line for the client receiver on your network:
N: ip.address.of.server 34000 user password 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Thanks a lot for the help.
but if I want to share only one line that I have in oscam.server, how do I do it?
Are the parameters in oscam.conf for the newcamd line the ones you put?
Are these key and door?
Display MoreCan anyone help me with the settings to make oscam reshare within the same network?
Assuming you want to use the CCcam protocol follow this:
In oscam.conf you must have the cccam section added.
Change the port (12000) to what whatever you want to use for the cccam protocol.
An account for the local receiver should be created in oscam.user.
Add your own username and password.
C line for the client receiver on your network:
C: ip.address.of.server 12000 local receiver
just put these parameters in oscam.conf and oscam.user and then in the receiver box put the C line?
And for newcamd lines how do I?
regards
Hi.
Can anyone help me with the settings to make oscam reshare within the same network?
m
Hello.
can anyone tell you where to find a cccam that works well on an octagon sf8008 box with the openatv image?
Hello.
Does anyone know how to put channel info in oscam settings?
The multiboot plugin is not working on zgemma h7s.
Gives unssupported stb error
Display MoreDisplay MoreDisplay MoreDisplay MoreDisplay MoreHello.
Has anyone tried this nude zgemma h7s image?
Does it work well in multiboot?
Is it a good image?
You go quiet it works well :)
I did not understand.
Does it work well on zgemma h7s?
Download my backup
Is it just installing the images?
Is everything set up?
yes
What is the best oscam for all zgemma h7s images?
And at better settings?
Display MoreDisplay MoreDisplay MoreHello.
Has anyone tried this nude zgemma h7s image?
Does it work well in multiboot?
Is it a good image?
You go quiet it works well :)
I did not understand.
Does it work well on zgemma h7s?
Download my backup
Is it just installing the images?
Is everything set up?
Display MoreDisplay MoreDisplay MoreHello.
Has anyone tried this nude zgemma h7s image?
Does it work well in multiboot?
Is it a good image?
You go quiet it works well :)
I did not understand.
Does it work well on zgemma h7s?
Download my backup
And what do I do with your backup?
Display MoreHello.
Has anyone tried this nude zgemma h7s image?
Does it work well in multiboot?
Is it a good image?
You go quiet it works well :)
I did not understand.
Does it work well on zgemma h7s?
From my observation, openatv7 latest is working fine for now.. Anyway, I use the opennfr7 as the main image and with the Nfr4x multiboot, I install the openatv7 on the MMC(storage card)
Does an opennfr7 work fine on zgemma h7s?
I have multiboot openpli 7.2, openatv6.4, pure6.5
My dear friend, the open nfr7 and open atv7 both python 3 are working well on my zgemma box.(H9s) you may consider trying them.. openatv7 seems to be faster....Rem,, Skin by Madhouse on ATV 7 looks good too!
open atv 7 is in testing phases?
Is it a stable version and good image for zgemma h7s?