Posts by junger

hi all, need help please, when i have the error 1, no ca found, tried dreamup but says box has wrong integer, help please, i have repaired the box and reflashed with pheonix,I would like to try another clone image, anyone recommend one please

thanks, missed that, It is sorted out with your help
Many Thanks

hi all when i try to transfer the enigma1 bouquet filr i get Transfer failed > /share/tuxbox/satellites.xml
any ideas please
Junger

, have done factory reset, will down dreamset now

Yes mates, I have tried to install sgt flips bouquet but it comes up with lamb fault

can someone please flash this dm500s please, i am struggling. would like to know whether its me or the box, thanks
Junger

Hi
are there different fans on DM800HDs, had a noise fault (well know) with my daughters and borrowed my sons Dm800HD to test the fan, the fan from my sons does not run at all in my daughters DM800HD and on closer inspection one of the fans is half the depth of the other fan
Anyone please

I had that problem mate, the mods sorted it using teamviewer, I am sure that they will sort yours out

HBOXKEY : /dev/sci0 XXXXXXX
#SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000
N: 127.0.0.1 10000 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256i all, I have tried ti insert my card details Box Key etc: into Cccam.cfg, but the card is being shown offline.
help please

[global]
nice = -1
logfile = /dev/null
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1

[webif]
httpport = 8888
httpuser =
httppwd =
httprefresh = 5
httphideidleclients = 0
httpallowed = 192.168.0.0 - 255.255.255.255
debug = 255

[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000

[reader]
label = ***UK
protocol = internal
device = /dev/sci0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 1
caid = 0963

have put the shares in CCcam, i assume that to be correct, I no longer see my card in cs studio servers, can i locate it elsewhere? i notice slight burn mark on the rear of the sly card, is this normal?
Thanks
junger

SERVER LISTEN PORT : 12010
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME :root
WEBINFO PASSWORD :password
TELNETINFO USERNAME :root
TELNETINFO PASSWORD :password
SERVER LISTEN PORT : 12010
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME :root
WEBINFO PASSWORD :password
TELNETINFO USERNAME :root
TELNETINFO PASSWORD :password
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME :0
OSD USERNAME :root
OSD PASSWORD :password
OSD PORT :80
SHOW TIMING : yes
DEBUG : yes
NEWCAMD CONF : no
#DISABLE EMM : yes
#EXTRA EMM LEVEL : yes
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : no
#MINIMUM DOWNHOPS: 1
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
CAID PRIO FILE : /var/etc/CCcam.prio
LOG WARNINGS : /tmp/warnings.txt
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
#SMARTCARD CLOCK FREQUENCY : /dev/sci0 3430000
BOXKEY : /dev/sci0 XXXXXXX
#BOXKEY : /dev/sci0 XXXXXX
N: 127.0.0.1 12010 root password 3903 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

Hi all, I cannot get my local back on line, I think I may have changed something in my Ccam.cfg but dont know what. any chance of someone looking at it on teamviewer please

On my local card it is shown in red when looking at it in CS Studioand it reports the following "A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond" against the card. tried restarting the cam but no joy? any ideas please

Thanks Master G, I did not look there, thant sorted it

View + duo. pheonix image, whilst trying to get oscam reset working now cannot get cs studion to update now, checked the settings and they appear to be correct, I get the following mssage

Update failed : HTTP/1.1 401 Authorization Required Update failed : HTTP/1.1 401 Authorization Required
Thanks
junger

My local card keeps going off line, I assume to my shares because it clears on my own box, I have tried the script below but that does not sort the problem out. I have to restart oscam CCam to get the card to restart.

Thanks arber for the script, i have made ipk file for BlackHole image, to restart EMU at 8am and run oscamcheck script every 10 minutes.

FTP to /tmp > Green button > Yellow button > Manual Install IPK Packages

Do a hard reset and you will see in oscam.log that script works every 5 min and write log.

You can test the script is working by telnet command, killall -9 oscam wait a few minutes and check var/log/oscam_restart_log.

You should get process was not working, which means the script is working and oscam was restarted.

Enjoy..

Can someone help please

Mine Pheonix

has any of the members been successful addressing his/her camera from the internet. When addressing externally can I use the same fixed dns that I use for my dm800 or is it better using the IP address. What software can I use to record the images, if any ?
Is there a good app for the Iphone?

Thanks
junger

Sorry Ten, I meant CCam lines manager 1.3 'Servers & flines'