Posts by junger

  • No Card Limit

    what is meant by 'No Card Limit' as shown in cs studio. does it, as I suspect mean no reshare?, I am getting there but slowly
    Thanks

  • local card, shows down on CS Studio until I restart the cam

    Thanks master g, that worked first time


    When I use the killall command in telnet i get the following


    Killall: cannot kill pid 19170: No such process
    Killall: cannot kill pid 19171: No such process
    Killall: cannot kill pid 19172: No such process
    Killall: cannot kill pid 19174: No such process


    Is this right?


    Sorted thanks

  • local card, shows down on CS Studio until I restart the cam

    Thanks master-g, I have tried this before but just to be sure I tried it again.
    FTP (OscamCheck Script for Vu+ BlackHole image) and I load it into temp, then green/yellow button, I get the error,
    the screen shows
    "Installing ipknew enigma2-scipt-oscam check " etc x 3.
    sh: /tmp/opkg.V038rr/ipkkknew: not found
    preinst script returned status 127
    Collected errors
    Aborting installation of ipknew enigma2-script-oscamcheck-BH
    Cannot find package ipknew enigma2-script-oscamcheck-BH
    execution Finished


    Help please

  • ecm time slot for a hop one

    Thanks for that
    When I look at cs studio, the ecm time to my peers is always under .2 secs or 200ms, when I look at my incomming shares on the box, they are all over the place, some are freezing, some are frozen for 10secs or more. I am just trying to establish if the share is in fact a local.
    Thanks
    junger




    Quote from musogeek

    It isn't that simple. Consider this. I have a local sly FTV card. It takes upto 100ms for it to serve an ecm request. I have a JSC sports card. It takes 300ms to serve an ecm request, and topping that is my MTV Unlimited, which takes 600ms.


    Depending on where your server is located, it could take between 40 and 200ms for the server to respond, and add this to the time it takes for their card to respond. As well as this, there can be network trafffic, stuff going on on your network, their server might be busy.... etc


    when making a judgement you do need to consider all of this!! - but once you understand what can effect ecm times, you can make a better judgement!!

  • Cannot get cccamphp to read my server

    Hi
    Vu+duo, Pheonix Enigma2, downloaded cccamphp and setup web port, user & pass, it then goes looking @ 127. etc but returns failed to update. can adrees the box via web browser etc: any help appreciated.
    Thanks
    Junger

  • oscam 2901/ccam213 oscam check

    followed 'master g' tut but the ipk fails to install oscam 2901/ccam213 oscam check


    OscamCheck Script for Vu+ BlackHole image


    "I have made ipk file for BlackHole image, to restart EMU at 8am and run oscamcheck script every 10 minutes.

    FTP to /tmp > Green button > Yellow button > Manual Install IPK Packages

    You can test the script is working by telnet command, killall -9 oscam wait a few minutes and check var/log/oscam_restart_log.

    You should get process was not working, which means the script is working and oscam was restarted.

    , cannot find the oscam_restart_log. in var/log/
    Any ideas please?

  • EPG at Weekends

    If your epg does not download at weekends, dont do what I did and spend all weekend trying to get it working, wait till Monday noon cause the probability is the servers unmanned or down
    Junger

  • Members changing dydns providers

    00:33:10.417 Connection from IP: 84.13.198.166 Login Failed!
    00:33:42.137 Connection from IP: 84.13.198.166 Login Failed!
    00:33:53.314 Connection from IP: 84.13.198.166 Login Failed!
    00:34:09.283 Connection from IP: 84.13.198.166 Login Failed!
    00:34:27.979 Connection from IP: 84.13.198.166 Login Failed!
    00:34:49.518 Connection from IP: 84.13.198.166 Login Failed!
    00:35:07.929 Connection from IP: 84.13.198.166 Login Failed!
    00:35:26.875 Connection from IP: 84.13.198.166 Login Failed!
    00:35:37.312 Connection from IP: 84.13.198.166 Login Failed!
    00:35:50.315 Connection from IP: 84.13.198.166 Login Failed!
    This is what I see mates, then there appear to be single attempts, If I am not using the default password-username is ist true that the attempts will remain unsucesfull?



    00:36:04.587 Connection from IP: 84.13.198.166 Login Failed!
    00:36:21.994 Connection from IP: 84.13.198.166 Login Failed!
    00:36:37.557 Connection from IP: 84.13.198.166 Login Failed!
    00:36:48.420 Connection from IP: 84.13.198.166 Login Failed!
    00:36:59.816 Connection from IP: 84.13.198.166 Login Failed!
    00:37:14.378 Connection from IP: 84.13.198.166 Login Failed!