Hi I am struggling to get the auto feed biss key plugin to work i have installed the plugin. I have put my SoftCam.Key file in usr/keys and I am trying to open amc africa on 10e. I have edited my oscam.conf file to the same as yours but when I update it I keep getting CW NOT FOUND. Please enter BissKey! what am I doing wrong can you please assist thanks.
when plugin shows "CW NOT FOUND", the #CW of that channel isn't in server!
the #CW of amc africa on 10e is added to server!
Don't work on VU+ zero4K
Which image?
*- Thanks My Friend for this Release it is The good Plugin.
working fine this plugin thanks for it
thanks for your kindness!
it is working on dm900 Dream ELite image?
and tell me how to install and how is working
regards
Please don't use this plugin in DRAEMOS!
I try to fix it!
thanks
master G added a new version:
An Enigma2 Plugin For Feed-Lovers it shows all feed info that is reported in sat-universe(#CW).When OK button was pressed, The #CW key is inserted in Softcam.key file and emulator is restarted automatically.QuoteRemoved Depends: nigma2 from control file, which was causing a dependency error during installation.
Added deb version for DreamOS Dreamboxes.
Special thanks to Admin masterG for supporting this plugin!
Do you test this plugin on DreamOS Dreamboxes? Do you edit that for DreamOS ?
My freind test plugin on DreamOS Dreamboxes and os was crashed!
Obviously its not designed for use with Cable tuners, but I'm sure others like myself will first open it to look to see what it does, whilst still tuned to a Cable channel. Its always good practice to prevent all possible crashes, even ones caused by the user themselves.
Ok! Before releasing this plugin, I fixed this bug, because I use DVB-T tuner. After some changes, a few lines was out off "if statement" block. I fixed this bug in last night and today i release it.
QuoteI also think it would be a good idea to allow users to select their own http port rather than forcing them to use 8888, I personally edited the code in the py to allow me to continue using my existing port.
Also you can change port in config file instead of edit in py code!:lollz:
Thanks for your recommendation:thumbup:, if you saw setting, I allow user to select softcam.key directory! I can done this for http port, but when i check several config file of my friend, in most of them, http port set to 8888. then i prefer to force user to change port!
New update 1.1
--Fix bug regarding to DVB-C & DVB-T Frequency; thanks to jenseneverest
:announcement1::announcement:Important Tip: In some Countries, user must use VPN to see #CW :announcement::announcement1:
Download:
Crash attached, there is also an issue with your ipk file, it is installing the control, pre/post inst file to root of the image
Looks promising though:thumbup:
Thank you very much for sending crash file and your tips about ipk file!
Regarding to crash file, this plugin is wrote for DVB-S OR DVB-S2 CHANNEL OR FREQ NOT FOR DVB-T OR DVB-C!
which channel or frequency do you test by this plugin?
I will fix this bug in next version!
master G added a new file:
QuoteDisplay MoreBissFeedAutoKey Plugin By momi133
Installation Help:
With an FTP tool send the BissFeedAutoKey.tar.gz file to /tmp folder then run these commands in telnet.
(paste each line one at a time, pressing enter after each)
Coderm -rf /usr/lib/enigma2/python/Plugins/Extensions/BissFeedAutoKey mkdir /usr/lib/enigma2/python/Plugins/Extensions/BissFeedAutoKey tar -xzf /tmp/BissFeedAutoKey.tar.gz -C /usr/lib/enigma2/python/Plugins/Extensions/BissFeedAutoKey
Description:
I've written this plugin based on feeds that are reported in sat-universe. After the feed freq is scanned and searched, user can use this plugin. when plugin is up, it shows all feed info that is reported in sat-universe like transponder,id,CW, 4:2:2 or 4:2:0, sport category ,game and somethings else and if you press OK button, The #CW key is inserted in Softcam.key file and softcam(like oscam,gcam,cccam,ncam or others) is restarted automatically if your plugin setting is ok, otherwise user should should restart your softcam manually.
Remote Control Button Help:
OK & Green : #CW key is inserted in Softcam.key file and softcam(like oscam,gcam,cccam,ncam or others) is restarted automatically
BLUE & Yellow: Show Setting Screen
RED & EXIT: EXIT PLUGIN
Option and Tips:
First of all, check plugin setting. Press Blue button and following screen will be displayed:
1. Config folder -> oscam.conf file -> [webif] section -> httpport = 8888
2. Config folder -> oscam.conf file -> [webif] section -> "127.0.0.1" must be in httpallowed section like(httpallowed = 127.0.0.1,192,168.0.0-192.168.255.255)
3- Please disable username and password in webif setting
>>> Please use following config: thanks levi45 oscam.conf
4- After config file setting was changed, softcam must be restarted manually to applying changes.
5.In setting screen, you should select folder of Softcam.key file(Default Folder: etc/tuxbox/config) and press ok button to save changes!
>>>Plugin delete keys that inserted by this plugin every 12 hours!>>> If #CW not found by plugin, a screen will be displayed that request the CW code of feed or any Biss Encrypted channel!
After pressing ok button, key will be inserted in Softcam.key file and softcam(like oscam,gcam,cccam,ncam or others) is restarted automatically.
>>>when you type CW in box, lowercase or uppercase letters is not important.
>>>If anyone is finding that the keys aren't being deleted from the SoftCamKey file after 12 hrs, change the time setting on your stb from "transponder time" to "ntp".
>>>Some #CW keys of tv channels are existed, if you want to add your favorite Biss channels, please post full info of it in this thread.(minimum info: Full transponder and #CW)
I buy new pc system and Eingma2pc(openpli image in ubuntu 18.04) is installed successfuly and everything is ok except oscam!
for descrambling a tv with BISS code, show this error:
==================================================================================================================
2018/10/02 21:11:15 6360F513 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 2600 ECM_PID: 0A28 PROVID: 000000
2018/10/02 21:11:15 6360F513 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 2600 ECM_PID: 1FFF PROVID: 000000
2018/10/02 21:11:15 6360F513 c (dvbapi) Demuxer 0 found 2 ECMpids and 3 STREAMpids in caPMT
2018/10/02 21:11:15 6360F513 c (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 0
2018/10/02 21:11:15 6360F513 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 0A28 ANY CHID PMTPID 0067 VPID 0406
2018/10/02 21:11:15 0EE0180B p (constcw) Searching CW for CAID 2600 PROVID 000000 SRVID 0067 ECMPID 0A28 PMTPID 0067 VPID 0406
2018/10/02 21:11:15 0EE0180B p (constcw) Entry found: 2600@000000:0067:0067:0A28:0000:11 11 11 33 11 11 11 33 11 11 11 33 11 11 11 33
2018/10/02 21:11:15 6360F513 c (dvbapi) ERROR: Can't open device /dev/dvb/adapter0/ca0 (errno=16 Device or resource busy)
=================================================================================================================
ERROR LOG: https://paste.ubuntu.com/p/dJyM3KVs7S/
Please help me
