Posts by Panda555

01: 65 6E 28 D9 41 1E F0

Yes , it work on every enigma2 receiver. The issue is probably in the image you are using, and not in your zgemma h2h. Install Openatv 7.3 or Openvix, PLI is not reliable because there are several different versions (9.0, 11.2, 11.3). Only PLI 8.3 is official , PLI 9.0 is in test phase

( release candidate ). Other versions are clones for me.

00: 66 B4 9A 01 98 BF B0

01: 23 BD 9B 6E 6F 69 DA

I downloaded oscam.config from your post and in disablecrccws_only_for is added 0E00 for AFN as global. Try to change it

with some other softcam.key who must be also copied in oscamicam folder. But now you have problem with AU. I don't see the

reason why oscamicam can't make AU for AFN ? For watching skyde you must have some servers who will add in oscam.server

or what is better install freeserver plugin. I have installed oscam emu by samur v. 11718 im my image and it works both , AFN with AU

and skyde , but with freezes of picture. You decision is now , keep oscamicam or install oscam emu by samur.

I wrote this before your last post.

You copied oscam.server and softcam.key which the author set as "promotional". You have to rearrange it. Also in oscam.server, disablecrccws_only_for = 0E00 is missing for AFN. Also, replace the softcam.key. Download it from another source. What does your oscam.config look like? All your oscam configuration must be inside the oscamicamam folder. Click on the oscamicam folder and copy all oscam.config (oscam.config,server,user,softcam.key).The oscamicam folder is now empty in your case. I don't understand how oscamicam from kite888 is configured, because I use oscam emu from samur.AFN works via emulator in oscam.server.In your SoftCam.txt missing keys who will open biss channels ( biss keys are only for Astra 4.8E ).

Where is your path now , in usr / script or home / root ? Also your oscam config must be in oscamicam folder and for

samur oscam in etc / tuxbox / config. Maybe is better to wait author for reply about your error ( ftplib error ).

Here are instructions on how to install the channel list for Viark 4K. You will find the channel list on this thread, where I added the new channel list with the date 14.08.

Thread

Channel List All 55East to 34.5West for Viark Droi 4K + Viark Drs2 4k ( New )

Up-14-08-2023-Channel-list-All 55East to 34.5West-for-Viark Droi 4K + Viark Drs2 4k-BY-FENEKI

Up All 5West - 13East - 19.2East - 28.2East
+ All Satellites channels and packages bouquets fully updated
Channel list on USALS > use it for CS/forever + keys + FTA from 55East to 34.5West that I can receive on my MOTOR 1.1dish
always keep a backup of your channel list because if you don't like mine you can put your channel list back

Panda555

Sep 13th 2023

1) Unzip the file and put it onto USB stick

2) put the USB stick on the USB port on viark drs2 4k

3) go to menu

4) then go to Database press OK

5) then press OK again on the Up 14/08/2023 Channel list All 55East to 34.5West for Viark Droi 4K + viark drs2 4k

6) then a box appears Warning Do you want to update this file you need to press yes will take couple of seconds

7) then press exit then you go out and press SAT on the remote control you should see all the satellites and packages

Up-14-08-2023-Channel-list-All 55East to 34.5West-for-Viark Droi 4K + Viark Drs2 4k-BY-FENEKI

Up All 5West - 13East - 19.2East - 28.2East

+ All Satellites channels and packages bouquets fully updated

Channel list on USALS > use it for CS/forever + keys + FTA from 55East to 34.5West that I can receive on my MOTOR 1.1dish

always keep a backup of your channel list because if you don't like mine you can put your channel list back

New CW: 38 54 87 13 04 4C 3F 8F

Sorry for the wrong information. The last available version is 11724, but it was not yet added on the first page. Install version 11718, many still use it.

7.0 E

12726 V 7500

4:2:0

ID: NASCAR-NCS PRI

CW: B1 AC 85 E2 51 CA 54 6F

This plugin works with all emu's ( oscam , cccam , ncam ). If you want to install oscam - icam , install the latest version 11725 by samur.

Yes , you dish must be pointed on 28.2. Icam protocol or streamrelay don't work like iptv.

pianos5

In screenshots above is all directly from satellite dish. Skyit is not from iptv. I think that is bitrate ( 8 - 9 Mbps ) very good

for HD quality of picture on skyit sports channels. Which iptv for skyit are you referring to? Maybe I didn't understand you well.

New CW: 08 59 DD 3E 92 40 FD CF

Using the Google , I found on five various sites or places where and how to buy mars server. I hope that you will find it on same way.

Quote from kalkan99

Mr mino60

Original software installed on dreambox 920 device

Even if I write the 8.3.8 plugin over the one installed on the device

Even if I delete the old one and do a clean install again

It gives the error "no module named html"

Try to install with telnet command. It depends which image you use.

opkg update

opkg install python-html (py2)

or

opkg update

opkg install python3-html (py3)

I don't understand why some don't want to understand that it is not possible to watch skyit via icam. Apart from those 10-15 channels in the list. If you already want to watch, buy some of the GTmedia models. In addition to it, you also have to buy the mars server separately for a year. Proven with pictures from other forums that it works. As for the k1_unique key(pairing mode) that key should be read from the card, and the card manufacturer probably knows about that key.If it were so easy to get the key, everyone would already be watching skyit via streamrelay.Also, what is written in the background and why is it possible to watch some packages that are not available on enigma2 boxes on chinese or arabic boxes, that is, is it because of the sale of such boxes and therefore maybe they offer what others do not have.One question. Where does the sharing of those packets come from so that it is possible to watch them on those receivers, and it is not a streamrelay?

Viark 4K is on Forever IKS server and not on mars cccam server,but both works on similar way.

My oscam is samur 718 and it works AU.

mark77

Did you add fresh latest keys for AFN in your SoftCam.key. Then run any AFN channel and check when will be added next keys.

You can also check in Webif ( Files > other files > SoftCam.key ) if are keys added. The keys will be added directly from server.

Also check if is correct path for key patcher. Must be usr / script with attr. 755.

So, you have installed the plugin. Does everything work for you now?