Posts by Panda555

  • FreeServer Enigma2 Plugin by Mino60 - v8.3.8 py2 py3

    I don't see a reason why freeserver can't be installed in Openpli image. How did you install it, via telnet command or ipk file.

    How is it that you received a message to install the PIL plugin for the previous image, and now nothing. What do you have now, do you have freeserver in the plugins and what is not working. If you need to install it again, uninstall the plugin in Plugins>Remove plugins (red button)>Extensions>freeserver and restart the box. What was your problem when you installed it. Just be patient, we will make it work for you.Install the ipk file instead of the telnet command.

  • FreeServer Enigma2 Plugin by Mino60 - v8.3.8 py2 py3

    Reading the previous posts, I noticed that some of you have installed Openpli 9.0. That image is still in the testing phase (prelease-test) or Openpli9.0 RC (release candidate) and therefore do not install it yet until it is finished. The last official image is Openpli8.3 for the specified receivers on the official website. As for the freeserver, you will not see it in the plugins, but when you enter the plugins, you will have a message that some modules are missing that need to be installed. When you install all the modules (maybe 2, 3, 4 modules ), then freeserver will be in the plugins. I didn't know some things either, so I learned over time.


    Kosta 12


    Did you install freeserver plugin on new image or not?

  • GTMEDIA X8 COMBO

    Here, to help you, I found some instructions for updating the firmware. The last firmware for your model is from 09.09.2021 and is probably already in the receiver, but you can check it in the receiver itself. If you have the same one, you do not need an upgrade. You can find all that on the GTMedia forum. You just need to search in the search engine in your browser. Here are the instructions for upgrading the firmware when you need it.


    Code
    Have a USB memory formatted in FAT32.
Download the latest version of the firmware from this same page.
We unzip the file and move the .bin to the root directory of the USB memory.
Now we go to the deco, we connect the memory to its USB port and turn it on. From the remote control, click on Menu -> Tools -> USB Update -> All Code -> File and here we select the .bin file of the USB memory that we have connected to it. Press START and confirm.
The update process will begin (important not to interrupt in any way). When finished, it will restart automatically and the process will be complete.

  • FreeServer Enigma2 Plugin by Mino60 - v8.3.8 py2 py3

    First, install the freeserver plugin. You can do this in two ways. Via the wget command in telnet or by copying the ipk file to the tmp folder and change attributes to 755 who you will install in the Media scanner plugin. After installation, you will have to install the modules (pythons) that are missing. You will find the necessary modules in the feeds of image. The modules you need can be found in Menu>Software Management>Advanced Options>Package Manager.

  • Incorrect Password for Telnet and FTP

    I have never had a problem with my "light" password. No one will steal my pwd or break into the box. If you have already entered a harder pwd,then enter the same one in the FTP tool or vice versa. When you enter a new pwd, you must receive a verification on the screen that the pwd has been entered successfully. In Network>Password settings you can also enter a random pwd that is offered to you (yellow button), then enter the same one in the FTP tool .

  • Incorrect Password for Telnet and FTP

    Login in telnet is always "root". In Network>Password enter the password which you use in FTP tool. Must be the same on both sides.

    You can't enter some random password . I don't know if for Zgemma boxes you need some specific password, because

    is for my DM800SE login "root" and pwd "dreambox".

  • Problem with openatv 7.3

    "root" is used for login, not for password. The password is changed in Network>Password and must be the same one you use in FTP. I have the same image and there were no problems. When you enter the new password, you will receive a message that it was executed successfully or changed and the receiver must be connected to the network.

  • MAX TV

    Moguće je gledati Max tv sasvim solidno i sa free serverima. Radi većina kanala bez smrzavanja. Imam instalirana dva servera

    koja traju 24/48 sati i jedino što je potrebno treba promijeniti "user" kada istekne. Na moje iznenađenje otvara Doku TV, Nova Max

    i Nova Series. Također otvara HBO , sve Arene i neke kanale sa Digitalb, a i Slovence kada su kodirani. Kako su to ipak free serveri

    neki kanali ne rade ili ima smzavanja ( BBC Earth , Viasat nature ) a neke ne otvara ( TV1000 , viasat explorer, history sd , Balkan Trip...)

    Ako je netko zainteresiran mogu vam dati adrese ova dva servera u PM , pa probajte. Kako su to ipak free serveri , ipak očekujte

    neka smrzavanja na nekim kanalima.

  • OSCam-ICam For SKY IT, UK, DE

    As for the script, I'll explain it to you via PM. If the streamrelay channel is not active, it is either towards the server or the channel has changed frequency, i.e. the service reference for the channel in question has changed. Use the last fixed userbouquet for skyde from Ciefp. I also have an oscam.log warning message. It refers to the radegast protocol, who isn't active. You don't need to worry about that.

  • OSCam-ICam For SKY IT, UK, DE

    As far as I know skyde only works with caid 098D. If you look in oscam.log, you will see that skyde channels use both caid 09C4 and 098E. Your server will also use these two caids. That's why I set those two caids to ignore in oscam.dvbapi. As for radegast, check if you have it in oscam.config and delete it. Oscam icam no longer works with radegast protocol (only dvbapi). As for the stability of watching skyde as well as skyuk, it mostly depends on whether the provider has icam set up on the server, but unfortunately this is not the case with free servers.

    PM

    I told you about that server in the PM. It still somehow works best for skyde, but only if you use it him as a reader( without other servers in oscam.server). If more readers are used, then the image freezes in most cases.If you entered the url for that server in the browser, you will see a script at the bottom for oscam icam using telnet.

  • OSCam-ICam For SKY IT, UK, DE

    In skyit userbouquet list you will find about 10 - 15 ( i didn't count ) channels who works will caid 183E and 183D . Some channels

    you will find also in Tivusat and Skyitalia providers , but also in TVN ( Polish package ).


    hondasat


    In oscam.dvbapi


    I: 09C4:000000

    I: 098C:000000

    P: 098D:000000

  • openATV 7.3 USB Image for Original Box

    Captain


    About my issues with picons


    However, in the end I installed the picons from the feed and now they are showing .Picons are now in folder

    /picon/logos in root.What I don't understand is that I previously created a new picon folder in the root and copied the Chocholousek picons, but why were they not installed after restarting the box. Can you tell me why there is also a logos folder in the picon folder, because this is the first time I see this folder in picons.

    I noticed that in /picon folder are srp picons and in logos folder snp picons?Should I install the Chocholousek picon updater for those picons

    if are the same as in the feeds.


    Your patched image works well on my DM800SE. Thanks.

  • MAX TV

    Ne znam što bi ti napisao. Ako si uzeo liniju na godinu dana možda je istekao period , tj valjda bi te provider obavjestio.

    A tko zna , možda je nešto do njega , odnosno linija.

  • PowerVu Keypatcher by taras-ua - Key updater script for AFN package channels

    Hi mark77

    I don't know if you solved your problem or not. I will try to explain.


    To get AU keys, you have to be on AFN channels. The script always runs in the background and when a new key is set, it goes to the server. The duration of one key is approximately 2 hours (key 00, 01). Look on the thread where the keys are placed. It is enough to go to any AFN channel and wait for about 3-4 minutes to get the picture on the TV. It is not necessary to connect to telnet every time to get new keys. What is important is that the keys will not update if you are not on AFN channels. Look on that thread when the new key was attached (00 or 01) and check if you got an AU key, and you can check that in Webif (Files > other files > SoftCam.Key).


  • MAX TV

    Aha , ti si te linije dobio. Da li možeš kontaktirati tog providera od koga si uzeo linije da mu kažeš da ti riješi problem.

  • MAX TV

    Te linije koje ti više ne rade , gdje si ih našao. Na kakve to stabilne linije misliš. Provjeri u Webifu koliko ti trenutno linija radi.

    Dok sam korisio plugin , od recimo 20 linija znalo je raditi u nekom trenutku 5 , 8 ili 15 linija.