Posts by psxchips

Quote from since1890

Quote from psxchips

Nueva compilación, compilación cruzada 11569 para Android y probada con un combo amiko a5 (android 7.0 / API 24), para cualquier persona

eso lo necesita ...

Simplemente siga las instrucciones de la publicación n.º 2 para actualizarlo ...

Quote

Registro de cambios:

11569: Intento de contar descifradores utilizados correctamente

DESCARGAR: MEGA

SERIA MUY AGRADECIDO SI PUDIESES HACER UN TUTORIAL DE COMO SE ACTUALIZA LA OSCAM.... DE CORAZÓN MUY AGRADECIDO

Display More

Display More

OSCAM compiled for android and tested with amiko a5 combo

New build, 11569 cross compiled for android and tested with an amiko a5 combo (android 7.0 / API 24), for anyone

that needs it...

Just follow post #2 instructions to get it updated...

Quote

Changelog:

11569: Attempt to count descramblers used properly

DOWNLOAD: MEGA

Esto es de otro foro, está en portuguÊs, espero que ayude...

Manual Instalar Oscam en Amiko a5 combo

1. Tienes que instalar una version APK atraves de la box, puedes instalae este -> OSCAM compiled for android and tested with amiko a5 combo -> tienes que ponerlo en una pen formatada en fat32 despues lo instalas atraves de la box.

2. para acederes a la box por FTP, tienes que usar un cliente de FTP (filezzila) e aceder usando el IP (por exemplo 192.168.0.100) de la box el user (root) e la password (root)

3. vas a la carpeta /var/bin e pones el ultimo OSCAM, le das todas las permissiones (boton deretcho en el fichero OSCAM -> permissiones e pones 777)

4. vas a la box e reinicias oscam

5 depues tienes que tener las flores nessessarias...

esso es todo lo que tienes que acer

Quote from since1890

amigo puedes ayudarme ? tengo un amiko A5 7.1 y no consigo hacer funcionar la oscam ..te lo agradeceria

primero tienes que instalar un APK despues solo tienes que sustituir el fichero oscam que pongo aca como esta en el post nº 2 de este hilo...

Quote from since1890

Quote from psxchips

Quote from ak2013

Hola psxchips

Necesito trabajar el archivo oscam ipk para android

Te refieres un APK !!! ipk es para enigma ...

Descargar Oscam APK 11520:

Display More

HOLA AMIGOS CUAL ES VERSIÓN DE OSCAM PARA AMIKO A5 MAS RECIENTE O QUE MEJOR FUNCIONE?

Display More

La mas reciente ese siempre la mejor...

New build, 11568 cross compiled for android and tested with an amiko a5 combo (android 7.0 / API 24), for anyone

that needs it...

Just follow post #2 instructions to get it updated...

Quote

Changelog:

11568

Fix for descramblers used not 100% fixed but it is more accurate than before

11567

More fix for dvbapi client v3

11566

HD+ HD05 Card support (tnx pehedima for patch!)

11565

More tryfix socketdata handling

11564

Small fix

11563

More tryfix for dvbapi client protocol 3

11562

Tryfix for ticket 4759

11561

[dvbapi] Always regard stream_type 0x81 as audio (ac3) without looking for the ac3_descriptor

This fixes some not ATSC complaint channels reported with no sound.

Thanks nautilus7 for providing another contribution!

Display More

DOWNLOAD: MEGA

Quote from zloy

all tried on what version of Linux to compile and Debian and Ubuntu probyval it is impossible to create oscam.apk for Android version 9 TV. if there is opportunity from whom who can this do help create release under androd 9 dvbapi 28 help please I need this plugin only for viewing сardsharing

I do it on ubuntu 18.04... you have to follow the steps from the manual, try researching on google also...

Quote from zloy

Quote from psxchips

Quote from zloy

Who can I ask to compile oscam for Android 9 DVBAPI 28 Armv7? Who can help me with this, I tried to do it myself but I can not and I did it on Os ubuntu 16.04 please help.

You can follow this guide, that´s the one i´m using -> http://www.streamboard.tv/oscam/wiki/crosscompiling#android

Best Regards

Error

Configured for android64.

root@compiller:/openssl-1.1.0l# make

/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" \

"-oMakefile" crypto/include/internal/bn_conf.h.in > crypto/include/internal/bn_conf.h

/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" \

"-oMakefile" crypto/include/internal/dso_conf.h.in > crypto/include/internal/dso_conf.h

/usr/bin/perl "-I." -Mconfigdata "util/dofile.pl" \

"-oMakefile" include/openssl/opensslconf.h.in > include/openssl/opensslconf.h

make depend && make _all

make[1]: Entering directory '/openssl-1.1.0l'

make[1]: Leaving directory '/openssl-1.1.0l'

make[1]: Entering directory '/openssl-1.1.0l'

/android-toolchain/bin/arm-linux-androideabi-gcc -I. -Icrypto/include -Iinclude -DDSO_DLFCN -DHAVE_DLFCN_H -DNDEBUG -DOPENSSL_THREADS -DOPENSSL_NO_STATIC_ENGINE -DOPENSSL_PIC -DOPENSSLDIR="\"/android-toolchain/sysroot/usr/ssl\"" -DENGINESDIR="\"/android-toolchain/sysroot/usr/lib/engines-1.1\"" -Wall -O3 -pthread -mandroid -fPIC --sysroot= -Wa,--noexecstack -fPIC -DOPENSSL_USE_NODELETE -MMD -MF crypto/aes/aes_cbc.d.tmp -MT crypto/aes/aes_cbc.o -c -o crypto/aes/aes_cbc.o crypto/aes/aes_cbc.c

clang80: error: unknown argument: '-mandroid'

Makefile:648: recipe for target 'crypto/aes/aes_cbc.o' failed

make[1]: *** [crypto/aes/aes_cbc.o] Error 1

make[1]: Leaving directory '/openssl-1.1.0l'

Makefile:132: recipe for target 'all' failed

make: *** [all] Error 2

root@compiller:/openssl-1.1.0l# 'crypto/aes/aes_cbc.o' failed

bash: crypto/aes/aes_cbc.o: No such file or directory

Display More

You have to follow the guide by the book and use toolchain r13 not above...

Quote from zloy

Who can I ask to compile oscam for Android 9 DVBAPI 28 Armv7? Who can help me with this, I tried to do it myself but I can not and I did it on Os ubuntu 16.04 please help.

You can follow this guide, that´s the one i´m using -> http://www.streamboard.tv/oscam/wiki/crosscompiling#android

Best Regards

Quote from kennboy

will this work on most androids, i noticed most post say 7 and above, can it be put on a mx box 5 i think it is.

Yes android version 7.1, anyway you can always try it to see if work in yours.

Best Regards

New build, 11560 cross compiled for android and tested with an amiko a5 combo (android 7.0 / API 24), for anyone that needs it...

Just follow post #2 instructions to get it updated...

Quote

Changelog:

11560

Remove more dvbapi logspam

11559

Fix: valid section length is minimal 4

11558

Newcamd: Corrected brain fart commit (zero check was even already present)

Camd35: Add protection against empty ecms

11557

More fix for malformed ecm request as described in ticket 4760

11556

Refactor handling of command packages

Add generic command package dump to assist in debugging

Remove the now superfluous dumps that were thrown while processing the commands

11555

Add generic hardening against empty ecm. It makes no sense to process empty ecms at all!

11554

Implement changes needed as researched by t5b6_de for dvbapi client protocol V3

11553

More fix due to bad refactoring commits

11552

[gbx remm] - allow remm request for unknown emm

[gbx] - dont send via issuer as peer card

11551

Tryfix regression due to furious refactoring without unittests

11550

Final refactoring step of dvbapi_get_packet_size()

11549

More furious refactoring since I still wasnt happy with the resulting code!

11548

Just refactoring due to investigating an issue with CAPMT parsing

11547

[gbx remm]

fix card not updated if entitlements are expired

new gbox reader parameter 'force_remm'

dont send same successive remm twice

Display More

DOWNLOAD: MEGA

Quote from biperva

Actually manufacturer has special oscam.apk but this one version is old. How can i update this one maybe you can help me for this.

My knowledge of Oscam doesn´t go that far, sorry...

Quote from biperva

Hello i tested this apk for my box which is based on S912 chipset with Android 7.1 version but it gives error. Would you please help me to work on my device too? I have also another device which has S905 chipset with 5.1 version too.

Quote from ak2013

...Is this oscam not compartible with my mecool K3 pro??

Acording to nozrrog "Oscam shell (APK) works through DVB api drivers of STB´s. It's not open source mostly. You cannot create new working Oscam shell (APK) without It. You need to refer to your STB manufacturer for appropriate driver documentation.", it means that each box will have a specific Oscam APK, and this one is for Amiko A5 Combo with chipset AML S905d so it could or could not work with other boxes, bare that in mind. You should look for an oscam made for your specific box...

Quote from biperva

i would like to compile oscam emu apk for android dvb box. I checked websites but i can't find working one.

Code

https://raw.githubusercontent.com/su-mak/osebuild/master/OSEbuild.sh

This source not avaliable anymore. Which source i can use for it?

Use this -> http://www.streamboard.tv/oscam/wiki/crosscompiling

Quote from ak2013

Hi psxchips

can i access oscam with ftp tool and what is username and password? give me working config files for this oscam

The username and password can be found in the OSCAM app on the box, as kismalac said you access oscam trough the browser, and the box trough ftp to update oscam witch you can find in /var/bin, the password for the ftp should be the same as for the oscam web access, usualy user: root Pass: root. Maybe for enigma the ftp paswword is pure2 as kismalac said...

Quote from ak2013

Quote from psxchips

Quote from ak2013

Hi psxchips

I need working oscam ipk file for android

You mean APK!!! ipk is for enigma...

Download Oscam APK 11520:

Display More

Hi thanks for the correction....... can I use this oscam apk 11520 in mecool kiii pro? many thanks again in advance

Display More

Don´t know, just try to install it and see if it works :) i have an amiko a5 combo with android version 7.1, only tested it with that box, it might be good for other boxes with android... Install it and leave feedback here...

Quote from ak2013

Hi psxchips

I need working oscam ipk file for android

You mean APK!!! ipk is for enigma...

Download Oscam APK 11520:

New build, 11546 cross compiled for android and tested with an amiko a5 combo (android 7.0 / API 24), for anyone that needs it...

Just follow post #2 instructions to get it updated...

Quote

Changelog:

11546

[gbox] Cosmetics

11545

Replaced strncpy() with cs_strncpy() in a few places

This fixes ticket #4754 http://www.streamboard.tv/oscam/ticket/4754 and possibly more compiler warnings.

11544

[dvbapi] Added more PMT audio descriptors

11543

[dvbapi] Cosmetics and minor optimizations

11542

[dvbapi] CAT filtering optimizations

Separate CAT filter (starting and stopping) from EMM filtering.

Stop CAT filter as soon as CAT is parsed, instead of letting it run forever. (Everytime we get a new channel, the CAT filter is restarted anyway).

Split CAT parsing from CA descriptor parsing.

11541

[dvbapi] Display service name when zapping

If present in oscam.srvid or oscam.srvid2, the service name is displayed at channel zap (like it was done before the CA PMT rewrite).

11540

[dvbapi] SDT parsing optimizations

The SDT filter is now stopped even if no service name or provide name is found. Previously, on FTA or BISS channels, the SDT filter would run forever.

The SDT is now used for getting the tsid and onid of the service (in case we haven't already receive them in the CA PMT).

Duplicate info from the log is removed to keep it clean. The SDT information is only printed once.

Removed some redundant chekcs from the SDT parsing function. They are already done in the caller function.

Added more service types as "tv".

The actual string parsing and supported character sets remained the same (still some eastern character sets are not supported).

Display More

DOWNLOAD: MEGA

Quote from kuzinv

Thanks, I have installed 11539. It is working steadily.

You´re welcome, i always test them in my box to make sure they are working...