could you give the build script used to compile this oscam ?
OSCAM compiled for android and tested with amiko a5 combo
-
- Android
- psxchips
- Thread is marked as Resolved.
-
-
could you give the build script used to compile this oscam ?
Of course, it´s available for everyone here -> http://www.streamboard.tv/oscam/wiki/crosscompiling#android
Best Regards
-
could you give the build script used to compile this oscam ?
Of course, it´s available for everyone here -> http://www.streamboard.tv/oscam/wiki/crosscompiling#android
Best Regards
thanks for your help
but i already did what is said in this tutorial but i failed
the problem is installing toolchain
i want to compile oscam for android 7 api 24
please help me to choose the right NDK .
i will apperciate if you give me written commands to do it step by step
-
thanks for your help
but i already did what is said in this tutorial but i failed
the problem is installing toolchain
i want to compile oscam for android 7 api 24
please help me to choose the right NDK .
i will apperciate if you give me written commands to do it step by step
You just have to follow those steps, there is nothing extra to do, use NDK version 13b, as it says in that tutorial version 14b has extra steps and might not work as expected. You just have to make steps 1 to 12 once, next updates of oscam you only need to do steps 13 and 14...
To use api 24 just change this command ./make_standalone_toolchain.py --arch arm --api 21 --install-dir /android-toolchain to ./make_standalone_toolchain.py --arch arm --api 24 --install-dir /android-toolchain ...
Best Regards
-
thanks for your help
but i already did what is said in this tutorial but i failed
the problem is installing toolchain
i want to compile oscam for android 7 api 24
please help me to choose the right NDK .
i will apperciate if you give me written commands to do it step by step
You just have to follow those steps, there is nothing extra to do, use NDK version 13b, as it says in that tutorial version 14b has extra steps and might not work as expected. You just have to make steps 1 to 12 once, next updates of oscam you only need to do steps 13 and 14...
To use api 24 just change this command ./make_standalone_toolchain.py --arch arm --api 21 --install-dir /android-toolchain to ./make_standalone_toolchain.py --arch arm --api 24 --install-dir /android-toolchain ...
Best Regards
ok thanks , i will try
in my previous trials , i used NDK 17
i will use NDK 13 and see if it works .
thanks again
-
the process failed at step 12 "make"
and if i cancelled flags
and cross compile with this command "make CROSS=/root/android-toolchain/bin/arm-linux-androideabi-"
it gives me error
"
QuoteIn file included from cscrypt/mdc2.c:3:0:
cscrypt/mdc2.h:62:25: fatal error: openssl/des.h: No such file or directory
#include <openssl/des.h>
^
compilation terminated.
Makefile:421: recipe for target 'build/arm-linux-androideabi/cscrypt/mdc2.o' failed
make[1]: *** [build/arm-linux-androideabi/cscrypt/mdc2.o] Error 1
Makefile:373: recipe for target 'all' failed
make: *** [all] Error 2
"
-
the process failed at step 12 "make"
and if i cancelled flags
and cross compile with this command "make CROSS=/root/android-toolchain/bin/arm-linux-androideabi-"
it gives me error
Repeat from step 7 again maybe you missed some step or something went wrong... also run every commando as root (sudo -i)
-
the process failed at step 12 "make"
and if i cancelled flags
and cross compile with this command "make CROSS=/root/android-toolchain/bin/arm-linux-androideabi-"
it gives me error
Repeat from step 7 again maybe you missed some step or something went wrong... also run every commando as root (sudo -i)
this manual method always fails
now i used a script OSEbuils.sh , give me an error when choose stapi with dvbapi , the error in "module-dvbapi-stapi.c"
the error in the screen below if you can help me solve it .
thanks anyway
-
this manual method always fails
now i used a script OSEbuils.sh , give me an error when choose stapi with dvbapi , the error in "module-dvbapi-stapi.c"
the error in the screen below if you can help me solve it .
thanks anyway
I also tried that script and couldn´t get it to work, i did not loose to mutch time with it anyway, that´s why i use the manual method. What version of Linux are you using?? i´m using Ubuntu 18.04 x64 (Hyper-V virtual machine) and the manual method works just fine for me...
Try creating a thread in this forum asking for some assistance, i am no linux expert, what i know is based on google search or reading this and other forums... Try asking Nozorrog in this forum he might be able to help you...
-
New build, 11537 cross compiled for android and tested with an amiko a5 combo (android 7.0 / API 24), for anyone that needs it...
Just follow post #2 instructions to get it updated...
QuoteChangelog:
11537
[dvbapi] Reworked "ca_pmt_cmd_id" skipping logic
According to the spec (https://www.dvb.org/resources/…/standards/En50221.V1.pdf), the "ca_pmt_cmd_id"
value shall be present inside the ES info loop. Unfortunately, each dvbapi client does each own thing. The
only reliable way to detect when this info is present in the CA PMT is to actually check its value, like it
was done in the old code.
Most boxes always send the typical value of 0x01 (ok_descrambling) and the above check works fine because
there is no descriptor_tag 0x01 to get confused with. On the contrary, for enigma2, values like 0x03 (query),
0x04 (not_selected) are possible (not yet, but soon). Skipping these higher values the same way will not work,
because descriptors with such tags can exist, so a different check is implemented for enigma2.
In practice, this commit fixes the VDR dvbapi plugin, as well as the enigma2 boxes with wrong dvbapi boxtype
setting ("none" instead on the correct "dreambox" - the setting is irrelevant now, but will make a difference
in the future, so make sure you set it correctly).
11536
[dvbapi] Fixed "ca_pmt_cmd_id" value for PMT files
For CA PMT messages received via PMT files, set the "ca_pmt_cmd_id" to a proper value (ok_descrambling) instead of zero.
Also made few cosmetic changes.
11535
[dvbapi] Tryfix for various boxes not working after 11533
It seems there are more retarded boxes out there that set the ca_pmt_cmd_id to 0 instead of a proper value.
11534
[dvbapi] Fixed previous commit when WITH_EXTENDED_CW is enabled
11533
[dvbapi] Rewritten the CA PMT parsing code
Some key notes for this revision:
- The CA PMT and PMT parsing code is split into separate functions. Additional functionality is also moved to different functions.
- The previous CA PMT parsing logic is retained (written by theparasol), but the code is much simpler, easier to maintain and a bit faster.
- The CA PMT message is not completely parsed now if there is no need for it (e.g. no change is made to the channel).
- The PMT is now parsed only if it's necessary (e.g. for powervu channels, when no streams are present in CA PMT, etc).
- Added preliminary support for reading the "ca_pmt_cmd_id" value. A future update (in oscam and enigma2) will allow using multiple oscam instances simultaneously.
- Added support for a new descriptor with tag 0x87 in the CA PMT message, used exclusively for sending the ca device information.
- Added detailed information for the private CA PMT descriptors supported by oscam in the readme (for dvbapi client developers).
Users experiencing problems with this revision (especially with "exotic" boxes), please report in the forum: http://www.streamboard.tv/wbb2/thread.php?threadid=46341
DOWNLOAD: MEGA
-
version 11537 says its version 11535 when i install it
-
version 11537 says its version 11535 when i install it
Yes i noticed that, and exported twice in case i made a mistake, they may have forgoten to change the revision number...
Maybe in the next update they will remember to do it :)
-
New build, 11539 cross compiled for android and tested with an amiko a5 combo (android 7.0 / API 24), for anyone that needs it...
Just follow post #2 instructions to get it updated...
QuoteChangelog:
11539[dvbapi] Added option to enable/disable ecm.info file creation
Thanks to the guys providing the patches.
http://www.streamboard.tv/oscam/ticket/4738
11538
[documentation] Whitespace cleanup
DOWNLOAD: MEGA
-
Thanks, I have installed 11539. It is working steadily.
-
Thanks, I have installed 11539. It is working steadily.
You´re welcome, i always test them in my box to make sure they are working...
-
New build, 11546 cross compiled for android and tested with an amiko a5 combo (android 7.0 / API 24), for anyone that needs it...
Just follow post #2 instructions to get it updated...
QuoteChangelog:
11546
[gbox] Cosmetics
11545
Replaced strncpy() with cs_strncpy() in a few places
This fixes ticket #4754 http://www.streamboard.tv/oscam/ticket/4754 and possibly more compiler warnings.
11544
[dvbapi] Added more PMT audio descriptors
11543
[dvbapi] Cosmetics and minor optimizations
11542
[dvbapi] CAT filtering optimizations
Separate CAT filter (starting and stopping) from EMM filtering.
Stop CAT filter as soon as CAT is parsed, instead of letting it run forever. (Everytime we get a new channel, the CAT filter is restarted anyway).
Split CAT parsing from CA descriptor parsing.
11541
[dvbapi] Display service name when zapping
If present in oscam.srvid or oscam.srvid2, the service name is displayed at channel zap (like it was done before the CA PMT rewrite).
11540
[dvbapi] SDT parsing optimizations
The SDT filter is now stopped even if no service name or provide name is found. Previously, on FTA or BISS channels, the SDT filter would run forever.
The SDT is now used for getting the tsid and onid of the service (in case we haven't already receive them in the CA PMT).
Duplicate info from the log is removed to keep it clean. The SDT information is only printed once.
Removed some redundant chekcs from the SDT parsing function. They are already done in the caller function.
Added more service types as "tv".
The actual string parsing and supported character sets remained the same (still some eastern character sets are not supported).
DOWNLOAD: MEGA
-
Hi psxchips
I need working oscam ipk file for android
-
Hi psxchips
I need working oscam ipk file for android
You mean APK!!! ipk is for enigma...
Download Oscam APK 11520:
-
Hi psxchips
I need working oscam ipk file for android
You mean APK!!! ipk is for enigma...
Download Oscam APK 11520:
Hi thanks for the correction....... can I use this oscam apk 11520 in mecool kiii pro? many thanks again in advance
-
Hi psxchips
I need working oscam ipk file for android
You mean APK!!! ipk is for enigma...
Download Oscam APK 11520:
Hi thanks for the correction....... can I use this oscam apk 11520 in mecool kiii pro? many thanks again in advance
Don´t know, just try to install it and see if it works :) i have an amiko a5 combo with android version 7.1, only tested it with that box, it might be good for other boxes with android... Install it and leave feedback here...
OSCam Support Forum
Configs, discussion, downloads and guides for OSCam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!