Hi. Is someone Can help me to have that dcwpk.
There is 2 official box, First one IS Ali and 2nd one BCM.
I Can now sée entitlement (Key from old card) but now I got this error : wrong OTP/OTA CSC values
Hi. Is someone Can help me to have that dcwpk.
There is 2 official box, First one IS Ali and 2nd one BCM.
I Can now sée entitlement (Key from old card) but now I got this error : wrong OTP/OTA CSC values
Hi,
Is someone can help me to make working new Black card on my vu+ duo2. Can see entitlement but no channel working.
In Private if someone can exchange
On vu+ duo2 , internal device are /dev/sci0 and /dev/sci1. In you config, the 3 reader point to /dev/sci0. Try to disable thé reader you not use and change the 2nd device for thé 2nd reader to /dev/sci1
but I'm starting to think RAM is defective
Above in the topic, I wrote the reasons why there may be such a malfunction.According to the log that he provided, it is difficult to say since it is clear that neither the processor nor the memory is determined and there is no connection, that is, there is no request from the central processor to read data from memory .. and it is difficult to judge unequivocally that this flash memory is faulty. There may not be one or more voltages that the processor or flash memory uses.As a result, the login will be empty.And what you are suggesting is to press down the processor or memory, this detachment of components from the board is called -the medicine is reballing to solder off the problematic chip, roll the balls and solder them back. And if it can, suddenly the receiver will start , then it will not be long before the first complete power outage from the mains .The way out is to take voltage measurements, compare them with those screenshots that are on Johnny's forum. Then the circle of troubleshooting will narrow down .But if the owner of the problematic receiver does not have skills in repair, a radio equipment repair service center.
Because It already happen to mines and it easy to test.
Open your demo, and press your finger on the processor cooler because it may be missing contact with the motherboard. Well start by holding your hand on it
Sound's like your dreambox is died. The chipset is not connected at 100%
IS the LCD display still working
OK. I'll send you PM now
Hi. Thank you. Everything is OK now but I've got some code like this for some box,
(1821@000000/0000/151A/6A:9AA2BEEF5823A8A4218B6FDA35233C75): not found (4775 ms) by 14000 - xxxx HD
As you see, the ident cannot be read by some box ; it take some time do get the appropriate code .
Have already try to share only service but nothing
this provider not need aes, not waste time more
Hi, What is needed to open provider 0500:030F00 with nano E0?
Inbox me
Request for oscam cycec for ubuntu 22.04.
Hello,
Please need your help for my reader Omnikey 3121.
The card cannot be initialized and reader doesn't got any entitelement from the card.
this is the LOG
2023/11/09 16:13:16 00000000 s (main) System name = Linux
2023/11/09 16:13:16 00000000 s (main) Host name = ds
2023/11/09 16:13:16 00000000 s (main) Release = 5.15.0-78-generic
2023/11/09 16:13:16 00000000 s (main) Version = #85-Ubuntu SMP Fri Jul 7 15:25:09 UTC 2023
2023/11/09 16:13:16 00000000 s (main) Machine = x86_64
2023/11/09 16:13:16 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2060
2023/11/09 16:13:16 00000000 s (main) signal handling initialized
2023/11/09 16:13:16 00000000 s (reader) call [pcsc] creating thread for device 0
2023/11/09 16:13:16 00000000 s (main) waiting for local card init
2023/11/09 16:13:16 07CC4BA5 r (reader) call [pcsc] Reader initialized (device=0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2023/11/09 16:13:16 07CC4BA5 r (reader) call [pcsc] Reader sci internal, detected box type: generic
2023/11/09 16:13:16 67E06A38 h (webif) webif: decompressed 177005 bytes back into 464408 bytes
2023/11/09 16:13:16 67E06A38 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
2023/11/09 16:13:17 07CC4BA5 r (reader) call [pcsc] PCSC was opened with handle: 241302552
2023/11/09 16:13:17 07CC4BA5 r (reader) call [pcsc] card detected
2023/11/09 16:13:17 07CC4BA5 r (reader) call [pcsc] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
2023/11/09 16:13:17 07CC4BA5 r (-) -- Skipped 1 duplicated log lines --
2023/11/09 16:13:17 07CC4BA5 r (reader) call [pcsc] detected card (Cameleon) in CAK6/Seca mode -> try switch to Nagra CAK7
Display More
and the reader
[reader]
label = call
protocol = pcsc
device = 0
mod1 = BAxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxF
mod2 = D4xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxB25
key3588 = A9xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxFA
data50 = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxE49ECE6CD0F9631B724FAB0C8BAEC1F66C346AD2DB1CB3871AF44C1E1592
mod50 = DBxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx4D5
idird = XXXXXXXX
forceemmg = 1
nuid = Axxxxxxx
detect = cd
nagra_read = 2
detect_seca_nagra_tunneled_card= 2
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,3,2,0
disablecrccws = 1
Display More
Have already try some oscam but still the same result.
System Ubunto 22.04 x64 serveur
Hi,
I have installed dreamelite 7.1 ond my dreambox DM900 and use Oscam 11691 with dreamelite extrafeed.
Now I cannot re-install it again. only 11682 is the lastest version.
try dreamelitte 6 ,with dreamextra pannel ,and use ncam oficial is most stabile version ,and not make experince with this box is very sensitive and qent by bricked very easy, and never not restore, this box not continue any suport,but not problems
extra detail:{ i use dream elite 6 , from extra panel i reinstall cam manager and i use restrictive cam with subscription ,and sigure very stanle ncam oficial ,with usb smargo{two cards} is like oscam ,butt with better suport ,and dont make every weak update , for what for?
Hi John32,
May be you can upload backup for me, I din't find dreamelite 6 official software
Hi,
I have installed dreamelite 7.1 ond my dreambox DM900 and use Oscam 11691 with dreamelite extrafeed.
Now I cannot re-install it again. only 11682 is the lastest version.
Hi, Thank you for your advice
The system crashed due to a power source problem but not an update. May I know which version of ncam you use. I use my dreambox to to reshare nline at home.
Hi,
I have installed dreamelite 7.1 ond my dreambox DM900 and use Oscam 11691 with dreamelite extrafeed.
Now I cannot re-install it again. only 11682 is the lastest version.
Hi. I've tested on my vu+ Zero white but don't work. Is firmware need to use open multiboot ?