Posts by biko

Quote from Majid Golizadeh

Hi my friend

Can you guide me how to install KeyAdder on my receiver?

VUplus Solo2

image:Open ATV 7.4

So far, I have run five times with your instructions to install, but I did not succeed. It is possible to give better advice

Thanks

Display More

from telnet

wget -q "--no-check-certificate" https://raw.githubusercontent.com/fairbird/KeyAdder/main/installer.sh -O - | /bin/sh

Try to re_configure the NeoBoot settings function, it will need several test until you succeeded

wait for any user have other experience to install on dreambox

as developer say on the neoboot

- Tuners not tested and not supported VIP

dm900

dm920

dreamone

dreamtwo

dm500hd

dm800se

dm800

dm800se

dm8000

dm520

dm525

but their are some tested published on enigma groups by installing openatv on internal flash and use neoboot successfully

but all dreambox agents say not install any opensource on internal flash

that will be on your own responsibility

n.jpg

n2.jpg

Quote from mj_84

Why is the screenshot option in the panel disabled?

are you use original panel or installed from openatv feed !!

if you used from feed yes keymap are changed from team and will fix that soon, if you don't re explain your issue what you faced !

Quote from lorept

Hello , i have a question , im using quite e lot ajpanel in different boxes , congrats for the work .

When im loading my iptv list from the list everything works perfect untill i have a small freze on my server , if freeze dosent restart the stream , just if i change the channel , on different iptv apps that i use when i have a freeze restarts after 1-2 seconds and all good; do i need too set something in the menu ,or?

thanks

There is function on AJPanel setting menu you can activated named : Auto Reset Frozen Live Channels {player dependent (5001 / 5002) }

ajj.jpg

@giorbak Its the same fix for other languages.

Coming soon.

@Captain Would you please explain if can add any stream relay channels to be as what did before for sky channels

Now we have T2MI Dasto Semte, abertis dtt

any way to develop that channels to use by whit list stream relay to have signals to that channels !!!!

Quote from ddinc

Quote from learn

Hi,

I am using AJPanel 4.0. My iptv server working multistalkerpro 2, but not work AJPanel.,Give ;Server Error;HTTP Error 461. How can I resolve this problem.My box Octagon Sf8008 twin image; Open ATV 7.5 22Jul 2024

Have the same problem with DM 920.Previously asked here but no. reply

This has been fixed.

Please wait for the the coming update

Thanks @EnoSat you are very supportive and helper on satellites.co.uk

last question

any update to sysctl.conf as i have small freezes when channel play

i think so

Since the service type is 64, it is enough to add only c15 (for OE2.0) or c00 (for OE2.x) to lamedb. What would be service type C, there is no need to edit lamedb.

but leave answer to ciefp

@ciefp you are great man

Much appreciation and respect for your continued support

000.jpg

yes i use your astra.conf, your bouquet 16,0 E - OiV Zagreb Dasto semtel

I have reception and i do scan for 11401 v 17500 and find one channel as 11401v SID 0xfa1

No channels open just black screen

but i notice i have only on lamedb just as following

0fa1:00a0ac89:0190:0000:100:0:0
11401V SID 0xfa1
p:DVB-S2 8PSK 11401V 16.0°E,c:031fff
0fa1:00a0ac8a:0190:0000:100:0:0
11402V SID 0xfa1
p:DVB-S2 8PSK 11402V 16.0°E,c:031fff

is that enough or need any more channels to add

Thanks, as chart 16E coverage area i am in 44dbw,

by scan 1 channel find, as 11401v SID 0xfa1

any thing more we can do !!

----------------------------------------------------

Hvala, kao u karti pokrivenosti 16E, nalazim se na 44dbw, skeniranjem 1 kanala pronalazim, kao 11401v SID 0xfa1, da li postoji nešto više što možemo učiniti !!

Thanks for your support @ciefp

i followed all your advice but Unfortunately Dasto Semtel not work

i don't know if it about reception signal on 16e !

as 30w-hispasat_abertis working great by same astra files !!

about Did i also copy the sid channel which is very important?

When astra.conf is changed, a full reboot must be done, so that the new conf file is loaded when the system boots.

that i don't know how to do it ?

11401v SID 0xfa1 display N/A

0.jpg

Hvala vam na podršci ciefp. Slijedio sam sve vaše savjete, ali nažalost, Dasto Semtel ne radi. Ne znam je li problem u prijemu signala na 16e! Dok 30w-hispasat_abertis odlično funkcionira s istim astra datotekama!! O da, jesam li također kopirao SID kanal koji je vrlo važan? Kada se astra.conf promijeni, potrebno je napraviti potpuni ponovni pokret, tako da se nova konfiguracijska datoteka učita prilikom pokretanja sustava. Ne znam kako to učiniti? 11401v SID 0xfa1 prikazuje N/A.

about Dasto Semtel

o Kanal

o Una TV

o Nova BH

o BN Televizija

o kanal Music

o OBN Bosnia

o N1 BiH

o TVSA

o RTV TK

o RTV Hit

o RTV USK

o RTV BPK

o Herceg TV

attached astra config file, but channels not work for me on vu zero 4k

------------------------------------------------------

o Dasto Semtel Kanal Una TV Nova BH BN Televizija kanal Music OBN Bosnia N1 BiH TVSA RTV TK RTV Hit RTV USK RTV BPK Herceg TV priložena je astra konfiguracijska datoteka, ali kanali ne rade za mene na vu zero 4k

Quote from giopet

The same for your receiver,here can you see,when it gives the Fix Update : BuildStatus ARM 7.5 as at 2024/07/11, 16:20:01 (mynonpublic.com)

Thanks, you mean wait until new build 11/07/2024 for my stb

NOW IT :

via Neoboot ATV 7.5 installed but not boot, stopped on boot logo

VU+ Zero4k

there is something with boot files !!!

any other versions are installed and working perfectly

last stable 7.4 upgraded to 7.4.1

Quote from urie

nothing to do with external causes the subtitle can be downloaded but do not work open the subtitle file in notepad++ and you will see only a few lines saying you need to pay ot put it in another way become vip member

OpenSubtitles.org, OpenSubtitles.com use api keys which is not work free any more

yes few sites whish support for now

about Arabic subtitle by mora we upload it on external server and add it for the plugin that mod by mino66

another languages i think no problem with !

Quote from urie

Biko Has there been updates since last time you posted.

at the moment I have been using one from https://github.com/popking159/ssupport but just downloading SubsSupport.tar.gz because his script does edit enigma2 settings file to to his preferencies ,but to be honest only a few sites actually work now .

same as my script do, just deference's are he add to settings stopped other sites to be active and leave what is working

Quote from sole1

I have the following problem with this plugin version 1.7.0-r1

I installed it in my receiver {Viper 4k} without problems

Everything is ok but it doesn't download subtitles only from Podnapisi and two other smaller sites that don't really have subtitles for me

But OpenSubtitles.com, Subscenes that worked very well on older versions are now active but do not download anything

I tried on OpenAtv and Pure2 the same problem

Subscenes are off Not work any more, there are similar sites but not adding to Subssupport yet

try to use next version by telnet, that's for py3 images not py2

wget https://raw.githubusercontent.com/biko-73/SubsSupport/main/installer.sh -O - | /bin/sh