Posts by s3n0

  • Pink card in oscam

    I'd rather try it with a fairly clean config, maybe only with a CAID value:


    - oscam.server:

    Code
    [reader]
label                         = reader_sci0
protocol                      = internal
device                        = /dev/sci0
detect                        = cd
caid                          = 0629
group                         = 1
emmcache                      = 0,3,15

    - oscam.conf:

    - oscam.user:

    Code
    [account]
user           = dvbapi_user
pwd            =
group          = 1
au             = 1

    - oscam.dvbapi:

    Code
    # Prioritise CAIDs as FORCE usage
P: 0629

# Ignore every CAID which was not handled before
I: 0

  • CCCAM 2.3.8 for ARM and MIPS CPU

    I don't know who develop the install script "postinst" in the package "enigma2-softcams-cccam-all-images_2.3.8_cccam_mips_arm_all.ipk" but there are some errors.


    There is no binary file for AArch64 architecture in the package.

    Cccam 2.3.8 compiled for the AArch64 architecture also cannot be found anywhere on the internet.


    Installation procedure for the library "libstdc++.so.6.0.22" is not properly handled :

    • If there is already a newer library in the system (currently in OpenPLi it is the current version so.6.0.25), then there is no need to copy this old so.6.0.22 from the installation package. So, there is a necessary to add version number comparison.
    • In addition, after copying the old version so.6.0.22, the symbolic link from the universal library so.6 is even overwritten. This, however, undermines system compatibility and is also a pointless step. If there is a newer library in the system, then it is sufficient to copy the old so.6.0.22 library into the system - for 100% compatibility and functionality of Cccam-2.3.8 and also without modifying the symbolic link "so.6", which should always point to the latest version of the library in the system.
    • Another mistake in the "postinst" script is that attributes are not assigned after copying the library (command: chmod a+x /usr/lib/libstdc++.so.6.0.22).

    Also, installing "libssl" is not properly handled - both new and old versions. However, this does not hinder, since new versions of libssl are often not developed for Enigma.

  • dm920 not read internal oscam

    Hi.


    Why didn't you answer any other questions ? How am I supposed to help you ? Read again what I wrote before, please.


    Just try basic config and don't add any bullshit there yet: (Back up and delete the other configuration files.)


    - oscam.conf :

    - oscam.server :

    - oscam.user :

    Code
    [account]
user           = dvbapi_user
pwd            =
group          = 1
au             = reader_sci0,reader_sci1

  • oscam emm update card

    So it was a mistake as I assumed in oscam client :). You probably had it wrong. You could try restricting the versions of the cccam protocol between the server and the client. You could also try the newcamd protocol instead of cccam.


    I don't see your client's configuration (which was set up incorrectly) anywhere.


    Using the Mgcamd softcam client is basically using the newcamd protocol instead of the cccam protocol (which is basically also supported by Oscam).

  • dm920 not read internal oscam

    Hello.


    The basic questions are always the following:


    - do you use functional configuration files ? or where do they come from ?

    - have you also tried to use a clean configuration ?

    - where are the other configuration files (oscam.conf, oscam.user, ...) ?


    Since the error of the used slot /dev/sci0 is displayed, it is probably, as LOG looks, used by another Softcam - do you use two different Softcams ? Is your Oscam running twice with a cause of a system error (for example, incomplete uninstall of a previous Softcam) ? Don't have two Softcams installed for /dec/sci0 at the same time ?


    Also very misleading is the name of this reader as "lower sci1" because it is quite possible that you have set the same hardware port for both readers, both upper and lower, and that is /dev/sci0.


    Sometimes the cause of the ATR info not shown is the fact that the card is rotated to the opposite side. Thus, the chip is turned into the empty space and not to the electrical contacts in the reader inside the set top box. Unfortunately I do not see your entire "init" card from Oscam Log, but only partial. Depending on the type of error from this ATR, it can sometimes be predicted that the card is facing the right side of the chip. Therefore, try turning the card in the reader to the opposite side.

  • O*sC*am issue

    Try turning off emmcache by setting this:

    emmcache = 0,3,2,1

    ...instead of:

    emmcache = 1,3,2,1


    You use Oscam for PC (cygwin emulator). I don't know if everything is working right there. For cygwin Oscam has no direct support. I also don't know Oscam for cygwin at all.


    The LOG you provided is excellent, but I'm not an Oscam programmer, so I can't beat the details. It looks like the decoding card is communicating, but no EMMs came from the client. Try to borrow some normal Linux set-top-box with a functional Oscam client and try it with him instead of a Chinese bullshit.

  • O*sC*am issue

    You can try to add the following code, into "oscam.server" file (for IRDETO reader card). Of course, if your decoding card is not paired with a set-top box.

    Code
    boxkey                        = A1C6F3D8B5E1F2C1
rsakey                        = 79EA25A763DA2C3E02B456A13962E60BCE63E628A2C177BE951CED96A9C6131A146F98D5867B7AE6682324FD6481913C0241F065C8D3457E54BB59B7B5DE0362
needsemmfirst                 = 1
force_irdeto                  = 1

    These two items "boxkey" + "rsakey" are universal values, but I don't know if I will work with all IRDETO cards. It works on my IRDETO card.

  • ntv vostok

    Translated do English (translate.google.com):

    Quote

    Hello. Tell me who shared the NTV + Vostok 0500 050C00 card, what is needed from the equipment and how many users can be connected to the card so that it does not block? thanks

    Use English please. You can use the translator: http://translate.google.com ;-)

  • O*sC*am issue

    Quote from rkbs1999

    (3) Client is Chinese 1506t box with CCcam and MGCAM .There is no option for AU in client receiver box.

    If you have 0/0/0/0 in the EMM statistics for OscamWebif, no EMM is sent to the card and that's wrong. I don't know your provider, but as far as I know, IRDETO encoding requires repeated and frequent use of management packets (EMM).


    So it's not a Linux set top box ? Um, I still think there must be an option to set AU (AutoUpdate) at the same time. Are you sure you can never enable / disable AU on your set top box ? If it is a Chinese set top box "Clan 8007 - 1506t", then try to get it the latest firmware. Maybe it will help (I don't know).

  • Oscam 11520 new server configs

    Quote from ahssv

    Здравствуйте. подскажите как можно расшарить карту caid 0500 ident 050C00, что нужно из оборудования? спасибо

    Translated to English:

    Quote


    Hello. tell me how you can share the card caid 0500 ident 050C00, what is needed from the equipment? thanks

    This depends on the entire card and coding system used. Some coding systems are difficult to share. Some providers also use sharing protection in their tabs (such as SurfLock). Not every card can be shared.


    CAID 0500 is used by many providers, so what is it exactly provider? What kind of decoding card do you own? One and the same provider often supplies multiple versions of its decoder card.


    Why didn't you start a new topic on your new question ?

  • O*sC*am issue

    If I understand it, it is purely an Oscam server (no client function).


    The configuration items "auprovid" (like 216F14) and "ident" (like 000000) do not match your configuration. Rather, throw out all the "ident" and "provid" configuration items (except "oscam.conf" -> "newcamd" server definition) out of the configuration. Leave only CAID items in your configuration.


    Also try throwing items "dropbadcws" and "disablecrccws" from oscam.server file. These are mainly used for a troubles with SKY DE. Your satellite provider does not need CRC EMM blocking. On the contrary, they can cause problems - they block some EMMs that Oscam doesn't understand, but they are needed for your Irdeto card.


    I don't know if you can write some EMMs over the "pcsc" protocol. Very often with external card readers there is a problem with writing EMMs. How does it look in card reader statistics? Are there any EMMs at all? Are they reported as an error in the statistics?


    You wrote very little information. You did not specify the configuration of the client you are connecting to your Oscam server with. Is AU also enabled on this client?

  • Help installing CCcam or OSCam on golden interstar hypro 4k receiver

    Hi.


    Which Enigma ? OpenATV ? OpenPLi ? OpenHDF ? Built-in Enigma firmware ? Or which Enigma2 is there installed ?


    Somewhat the Softcam installer sometimes also depends on the Enigma distribution you have installed.


    If you would like to ignore Enigma and use the Softcam manual installation procedure (direct Linux procedure), for example, use this guide:

    Tutorial : How to install softcam (OSCam/CCCam) manually, if you hate ipk packages

  • oscam config files ?

    Radders58 :


    Probably not running Oscam service, as Mater G wrote it.


    If you can use Shell or if you can connect to the set top box console (for example with PUTTY app), you can also use manual installation:


    For more information about the "/etc/init.d/softcam" shell script, you can read the contents of this script - at the beginning of it is brief information on how to install this "init.d" control script.


    BTW ... in your oscam.server file cannot see a emulator card reader. So you need Oscam without EMU module (my script mentioned above, Oscam without EMU is downloaded as default Oscam - eventually you can change it by editing my script if you need OscamEmu instead of classic Oscam).

  • oscam config files ?

    Radders58 :


    All you need to do is back up your configuration files from the old Oscam, where everything worked !


    You simply move these configuration files to a folder in your new installed Oscam, under another Enigma. How we can find out the path to the configuration files via OscamWebif, I've written to you before.


    You don't need to install 10x new Enigma distributions to run Oscam ! Oscam must run correctly every time and everywhere ! It certainly must run in cases of all nearly identical Enigma2 that you are testing ! The differences are only in other chipset architectures such as SH_4 and AArch64. There are also differences when using different platforms such as Linux PC (x86 CPU) or WiFi router via an external reader, and other platforms. However, you always use the same Enigma - i.e. with the open source OE2.0 Enigma core. So, all your Enigmas are the same ! So, Oscam must always work the same everywhere, because the same Oscam compilation is used everywhere.


    Besides, why do you need an EMU module ? This is more difficult to set up (Oscam has a module that emulates a physical card reader). If you don't need Oscam-Emu, use pure Oscam without EMU module instead.


    OMG

  • oscam config files ?

    Try another USB stick. Try to use an older USB stick, ideally with a smaller capacity up to 4-8 GB maximum.


    Alternatively, try reformatting your USB stick with a dedicated tool, such as:

    "SD Formatter 4.0"

    "SD Card Formatter 5.0.0 - Tuxera"

    "Kingston Format Utility"

    "HP USB Disk Storage Format"


    With these tools, format the USB key again, to FAT32 or to the filesystem that automatically offered the formatting tool.


    The Octagon SF8008 also includes a Multiboot (in CFE boot-loader I think). You may have flashed under the wrong SLOT and then switched to this free slot where you have your flash ? Sorry, but don't know Octagon set top boxes well.


    You can find the procedure for flash Octagon SF8008 anywhere on Google or Youtube.

  • oscam config files ?

    Which set top box do you own ? Manufacturer and model ?


    It is quite possible, for example, that you have to use the front or rear USB connectors - on some devices the flash selection of the USB connector is dependent.


    In general, have you followed the correct procedure for flashing your device ?

  • oscam config files ?

    Connect to Oscam Webif (Oscam Web-GUI) via your web browser (http: //IP-address-of-your-set-top-box:8888) and go to:


    Files -> oscam.version -> check the entry named as "ConfigDir"