Thanks for your reply.
I connect to a second card on his server also , which runs in oscam and gives me no problems. I forgot to mention earlier that if I use a basic amiko mini I have no problems. On the amiko I can select different cams for different servers, so I use mgcamd for my internal and cccam for my friends connection. I only have the problem with my VU duo and Tiviar alpha+ E2 boxes. I run the latest Vix image on them both. When the reboot the box all runs ok for another 10 minutes.
Have this problem for a long time now.
I have mgcamd running on my E2 boxes throughout my house. They all connect to my PC which hosts 2 card running in oscam. I have no problem with these two services at all. My problem is that I have a line to my friend's card which runs in cccam. To achieve this I have a file cccam.lists in my keys folder. When I am viewing programs from my friend they start freezing and then stop after about 20 minutes or so. My other programs which run from the newcamd.list work fine always.
Is there something my friend need to put on his server to keep me connected or something I need to add to my mgcamd config. I tried oscam also but had the same result.
Also look out for internet providers using the licence free 5Ghz band. I have come across lots of places that internet service providers using point to point links that are being over driven causing harmonics which sit in the satellite band. You need a spectrum analyzer to trace and find the source.
This might help other forum members.
Sorry. My mistake. I meant to ask what MER are you recording. What way are you measuring it.
Thanks ES,
Sent emms to the card from PC and it restored service. It updated from box in my bedroom last month so hopefully all will be ok tomorrow on the 1st.
OK,
What BER have you recorded.
Thanks bud.
I have it clocking emms at the moment with a config I received from forum member ste141. I don't quiet understand how it works. My stb is running oscam and is connected to my dish which sends the emms to the pc and card. I think it uses cccam protocol for this job but am not sure. Here is a sample of my server in my stb.
Maybe someone will post an explanation of what is actually happening regarding the emm's being updated on my pc.
[reader]
label = PC_Server
protocol = cccam
device = 192.168.5.135,12000
user = hi
password = hi
inactivitytimeout = 30
group = 7
cccversion = 2.2.1
ccckeepalive = 1
HI BO,
AS far as I can remember I gave up on it. I use the amiko mini extra now for FTA. It can run stalker for IPTV ok. I setup one for a friend and it worked out ok. After that I haven't played around with the IPTV side of things.
Thanks for your reply.
I was hoping that some forum members here would be able to assist me as I don't want to join another forum site for just one problem. If my back is up against the wall I will follow your link.
Thanks again.
Hi,
Thanks for your reply.
Let me explain. The card is running ok in my E2 box using oscam and RSA etc. I want to share this to all my other rooms with my PC which is currently runnin oscam.
Hi VA and All,
Did you get running.
I was running my card in a PC with oscam and RSA, however because of updating problems I have decided to run my card in a STB with oscam and dish connected. It runs in the box but I want to share it to my PC server. At the moment my PC server UI says its connected to the STB but it is not clearing pictures. Both stb and pc are running oscam.
Hi All,
My Conax 0b01 NC+ card updated last night but is not clearing pictures. I was told a few months ago that some changes were expected on 1/7 /20 but don't know if this is true or not. Can anyone confirm if they have a similar card running is oscam at the moment.
Cheers.
Thanks sagher I got sorted today.
Thanks Sagar,
I prefer to run my own card.
It has been suggested by my card provider after some sort of rsa key change that I '' must search old log from activation day and send to card via phoenix programmer''.
Does anyone know anything about this because I don't. Any advise appreciated.
Thanks in advance.
Tonight is date due for emm update so I would really appreciate any help from any member running 0b01 conax.
Thanks in advance.
Thanks for getting back to me. Here is my config now. I have changed saveemm-u to 0. is this correct and will I need to have the supplier resend a refresh emm to the card.
[reader]
label = NC +
protocol = internal
device = /dev/sci0
caid = 0B01
rsakey = wwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww
detect = cd
mhz = 450
cardmhz = 450
ident = 0B01:000000
group = 1
emmcache = 1,5,2,0
blockemm-unknown = 1
saveemm-u = 0
saveemm-s = 1
saveemm-g = 1
auprovid = 000B01
Any of you guys have oscam config for the nc+ card conax. Mine is acting strange when it takes emms at the beginning of the month. Not all packs update.
HI all,
Any members out there that are running NC+ conax card in oscam I would appreciate some help comparing configs etc as recently I am having problems with emm updates.
After updates once a month not all my subscribed packs will clear. This popped up in recent months.
Top of the pops zilizila :thumbup::thumbup:
