Posts by Knippy

  • adding channel keys

    cheers for the post, i have downloaded all 3 to test. gone to a few channels and are scrambled
    i have made sure file path is usr/keys the sofcam.key shows as a reg file not just blank?


    rebooted my box as well

  • adding channel keys

    how do i add other sat keys to my box?


    i use both oscam and cccam but there was a channel a mate told me about and said i need to add a key every month


    i cant seem to find a plugin for entering the key? or do i do it on my server?

  • default ports for cccam etc

    well you must not keep up to date mate on the news as was reported years ago that blueyonder used to watch ports as the default ports for limewire ect was reported to be watched


    just think could be something to try, see if any better

  • default ports for cccam etc

    just really looking for feedback on the ports we used when giving out c line etc


    as more and more posts i read are saying problems with isp`s and ports


    talk talk having problems on 12000 last week
    *** BB has been reported now a problem on cs and has been reported back as port 7000 used


    i just checked this site:


    List of TCP and UDP port numbers - Wikipedia, the free encyclopedia


    Code
    http://en.wikipedia.org/wiki/List_of_TCP_and_UDP_port_numbers


    in fact 7000 is a bad port to use? as its listed as a bit torrent port, meaning a ISP could think you are downloading files 24/7


    12000 is not even listed as a port


    i myself is thinking to move to a port a anti virus or firewall software would use, so it looks like traffic via updates....



    what are your thoughts?

  • hellllllllllllllllllllpppp no net to server

    Quote

    ping google.com
    PING google.com (173.194.34.65) 56(84) bytes of data.
    64 bytes from lhr14s19-in-f1.1e100.net (173.194.34.65): icmp_req=1 ttl=54 time=21.0 ms
    64 bytes from lhr14s19-in-f1.1e100.net (173.194.34.65): icmp_req=2 ttl=54 time=18.9 ms
    64 bytes from lhr14s19-in-f1.1e100.net (173.194.34.65): icmp_req=3 ttl=53 time=14.5 ms


    it somehow updating my mac and my router blocked it

  • hellllllllllllllllllllpppp no net to server

    i dont think you saw my post mate right, i cant do any apt-get at all, as no net???


    thanks as well on the code point


  • hellllllllllllllllllllpppp no net to server


    cat /etc/resolv.conf
    # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
    # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
    nameserver 192.168.0.1


    cat /etc/network/interfaces
    # This file describes the network interfaces available on your system
    # and how to activate them. For more information, see interfaces(5).


    # The loopback network interface
    auto lo
    iface lo inet loopback


    # The primary network interface
    auto eth0
    iface eth0 inet dhcp


    route
    Kernel IP routing table
    Destination Gateway Genmask Flags Metric Ref Use Iface


    this came up after running oscam -b


    route
    Kernel IP routing table
    Destination Gateway Genmask Flags Metric Ref Use Iface
    default 192.168.0.1 0.0.0.0 UG 100 0 0 eth0
    192.168.0.0 * 255.255.255.0 U 0 0 0 eth0



    root@ubuntu:~# traceroute 8.8.8.8
    The program 'traceroute' can be found in the following packages:
    * inetutils-traceroute
    * traceroute
    Try: apt-get install <selected package>


    root@ubuntu:~# ping google.com
    ping: unknown host google.com

  • hellllllllllllllllllllpppp no net to server

    if i do a ifconfig i get



    root@ubuntu:~# ifconfig
    eth0 Link encap:Ethernet HWaddr 00:13:d4:1d:26:0e
    inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0
    inet6 addr: fe80::213:d4ff:fe1d:260e/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:1826 errors:0 dropped:0 overruns:0 frame:0
    TX packets:979 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:207952 (207.9 KB) TX bytes:563360 (563.3 KB)
    Interrupt:22


    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:40 errors:0 dropped:0 overruns:0 frame:0
    TX packets:40 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:3365 (3.3 KB) TX bytes:3365 (3.3 KB)

  • hellllllllllllllllllllpppp no net to server

    did a update on my server last night and for some reason after that it killed it


    i can get channels only via local network and no one can connect to the server


    i did a ping test on google and bbc comes back unknown host


    tried apt-get updates ect, all come back as failed


    rebooted router, tried new cables, some reason now on boot up i get a waiting 60 seconds for network as well:snicker:
    anyone free for help asap

  • muti user update card?

    ok so i have 3 users


    me card 1
    gf card 2
    bedroom box card 3


    now in dvbapt i have my name in there


    after 3 days i only get my name as active?


    in oscam.config i have



    [dvbapi]
    enabled = 1
    au = 1
    user = frontroom
    boxtype = pc


    pc as i have the cards in server

  • werid entitlments

    weird


    today it should active on oscam, as in updating card


    it now lists:


    tier 0963 000000 000000000000B765 00000000 1970-01-01 2012-11-28
    tier 0963 000000 000000000000B766 00000000 1970-01-01 2012-11-28
    tier 0963 000000 000000000000B772 00000000 1970-01-01 2012-11-28
    tier 0963 000000 000000000000B773 00000000 1970-01-01 2012-11-28


    gone up 20 days, but still only 4 entitments



    just gone and checked channels


    cant get ch4 hd, itv1 hd is ok, no itv2 hd, no ch5 hd


    itv 3, +1 ok
    more4 ok
    ch5 ok
    5usa ok
    chan4hd via another tp is ok