Posts by macchese2

  • Error flash

    And it's possible now or... late?

  • Error flash

    Quote from hecha71
    Quote from macchese2

    Yes, I can.

    Bro, if you fill out the backup, remove the birds, as I showed in the screenshot. and when the image is clean, it is not recommended to upload something that may cause a problem.

    I tried, but I still get the usual typing error. This appeared after my friend tried to install multiboot. But to restore the boot, are there any procedures?

    Thank you

  • Error flash

    Quote from lubina

    is possible renter in rescue mode? you see on monotor IP adress ?

    try this:

    Yes, I can. But with the Rescue image I have signature error,and with a backup I tried,it tells me to reboot but gets stuck.I have this "ONE Rescue Loader #106"

    Code
    Fatal: Target device '/dev/boot' is not writable
Fatal: Failed to run kernel-image.postinst




  • Error flash

    Quote from jrcruz

    you try whit diferent image?

    Thanks

    I try this

    dreambox-rescue-image-dreamone-20211029

    OpenATV

    This is the error


    Code
    Image 0: 667 Bytes = 0.65 kB = 0.00 MB
Fatal: Target device '/dev/boot' is not writable
Fatal: Failed to run kernel-image.postinst

  • Error flash

    Hello everyone. A friend of mine gave me a UHD Dreambox, telling me that he would throw it away because it was no longer available. It pretty much blocked the flash, and any image returns an error. If I try recovery, it responds with signature error. It only starts from SD card.

    Is there a procedure for flash recovery?

    Thank you

  • Oscam Icam TVHeadend

    I tried to do the whole procedure,modifying the verse in the jammy. But when I launch the file.deb created,I give this error.The following packages have unmet dependencies. Where am I wrong? Thank you

  • Oscam Icam TVHeadend

    Quote from fegol
    Quote from macchese2

    Unfortunately, however, the files for mapping the channels, those of E2, I can not make them read. Can you help me? Thank you

    If you mean an enigma2 device in the case of E2, then I can't help you, I don't have an enigma 2 device, and I don't know how tvheadend can connect to these devices (but you can add enigma2 bouquets)... , but as far as I know, enigma 2 devices can connect to tvheadend. (httx://<tvh_hostname_or_ip>:9981/playlist/e2).

    (it is true that the namespace is not exactly the same for the enigma2 bouquets and tvheadend, but...)

    The problem came out by mapping the channels. You can import the lists already made of E2 into TVH. It gave me trouble telling where I put the file. Thank you

  • Oscam Icam TVHeadend

    Quote from fegol
    Quote from macchese2

    Hi all. I wanted to try to make the icam work on TVheadend 4.2.8-36, but I can't do it. I have TVH installed on a Rockpi x (card similar to Raspberry but X86) with Ubuntu 20.04LTS. Like video cards I use 2 TBS. Thanks

    maybe, tvheadend_4.3-2063~gd88549603-dirty~focal_arm64.deb

    Hi fegol


    Hello fegol. I am successfully using my Rockpi x,with Ubuntu 22.04 LTS image tvheadend_4.3-2063~gd88549603-dirty~focal_amd64. I updated hardware, always x86 and with Ubuntu 22.04 LTS, but the image gives me error and is not installed. I tried this tvheadend_4.3-2111_ga1cb8cffb-dirty_jammy_amd64 and it is installed. Unfortunately, however, the files for mapping the channels, those of E2, I can not make them read. Can you help me? Thank you

  • TVHeadend Docker Image with ICAM Support x64 and ARMv7 (PI 4 & 3b+)

    For the CAS in configuration?

    Thanks

  • Oscam Icam TVHeadend

    Quote from theALHU

    I have created an docker image that is based on linuxserver/TVheadend and also includes the ICAM patch. Since I use this image myself, I will constantly keep it up to date with the latest linuxserver/TVheadend. Currently, I am working on supporting ARM, so that Raspberry Pis can also enjoy ICAM.

    If anyone is interested: https://hub.docker.com/r/thealhu/tvheadend.

    I try to install on portainer OMV.I install qbittorrent,ok.With tvheadend i have this errors.Where am i wrong? Thanks

    failed to deploy a stack: tvheadend Pulling 74909f00613b Pulling fs layer fc9e78fee11f Pulling fs layer ecd3564ed2b8 Pulling fs layer 921c0c5d0bb7 Pulling fs layer b4f0ec2dc2a3 Pulling fs layer caa692f2d07d Pulling fs layer 958f6f895025 Pulling fs layer 4bcdfed73939 Pulling fs layer 5dba56ef76d0 Pulling fs layer abcbd670217b Pulling fs layer e2d7fda4143d Pulling fs layer 10bccea57353 Pulling fs layer 9f6d2590b036 Pulling fs layer 6695187086fa Pulling fs layer b4f0ec2dc2a3 Waiting caa692f2d07d Waiting 958f6f895025 Waiting 4bcdfed73939 Waiting 5dba56ef76d0 Waiting abcbd670217b Waiting e2d7fda4143d Waiting 10bccea57353 Waiting 9f6d2590b036 Waiting 6695187086fa Waiting 921c0c5d0bb7 Waiting a2988dce7815 Pulling fs layer eee2b2a3fbb3 Pulling fs layer a2988dce7815 Waiting eee2b2a3fbb3 Waiting ecd3564ed2b8 Downloading [=====================================> ] 721B/957B fc9e78fee11f Downloading [=========> ] 720B/3.723kB ecd3564ed2b8 Downloading........

  • Oscam Icam TVHeadend

    Quote from Mastropiero

    Does patched TVH still work as an alternative to Oscam-Icam on Ubuntu? I installed it following the step #81 and it worked perfectly. Then it stopped working. Now I have reinstalled the system with Ubuntu 22.04, I have repeated the process but I get errors, maybe I am missing dependencies or libraries to install. Now I have TVH installed from an official repository and, to be honest, leaving everything configured is quite laborious, I use DVB-S channels and IPTV lists. When you run that process, with the final installation with dpkg, TVH is clean and you have to start all over again and I'm not sure if it works like the first time. However, the Oscam-Icam just didn't make it work. I don't know if it's configured correctly, I can't create E2 Icam bouquets in TVH...

    With Tvheadend I mapped the channels normally

  • NCam Docker

    Quote from Chris230291

    I don't understand what you are asking.


    Quote


    Docker is a software platform that allows you to build, test, and deploy applications quickly. Docker packages software into standardized units called containers that have everything the software needs to run including libraries, system tools, code, and runtime. Using Docker, you can quickly deploy and scale applications into any environment and know your code will run.

    I was simply asking how to update the Tvheadend. To put the one with Icam I updated everything with a .deb file that fegol had made. But now I don't know how to update. That's all