Im going to have a try. with the sat station image as im not having any joy with the Roy image.
thanks for all your help lacierva
Im going to have a try. with the sat station image as im not having any joy with the Roy image.
thanks for all your help lacierva
chhers im using roy image i noticed your using satstation does that matter?
caid = 1234 ###### PUT CAID FROM REMOTE CARD HERE
ident = 1234:000000 ##### PUT CAID:IDENT FROM REMOTE CARD HERE
im not sure what these are all i was provided with nline was
device key user and password
I just doubled checked Softpannel , Oscam is 100% Runnning. so now im even more confused.
i have posted my configs below can you please take a look
my configs currently in use are below;
Oscam.user
#
# user configuration using oscam as SERVER for remote client
# (if you use oscam as simple CLIENT connecting remote server, see oscam.server)
#
# simplest account
#[account]
#User = john
#pwd = PASSword
#group = 1
# ============================================================
# DON'T CHANGE THIS USER: it manage EMM forward to readers
# You can enable/disable EMM forward to cards setting "AU"
# see docs/oscam.user
[account]
user = dvbapi_qboxhd
group = 1
au = 1
# ============================================================
# --- user examples ---
# user for group 1 with Betacrypt tunnel, no monitoring, only one connection possible, AU enabled
#[account]
#user = user1
#pwd = password1
#monlevel = 0
#uniq = 1
#group = 1
#au = reader1
#services = services1
#betatunnel = 0300.FFFF:0100,0400.FFFF:0100
#ident = 0100:000000
#caid = 0100
# user for group 2 with monitor access, AU enabled
#[account]
#user = user2
#pwd = password2
#monlevel = 1
#uniq = 0
#group = 2
#au = reader2
#services = services2
#ident = 0200:000000
#caid = 0200
# user for group 2 without monitor access, AU disabled, account disabled
#[account]
#user = user3
#pwd = password3
#disabled = 1
#group = 2
#services = services2
#ident = 0200:000000
#caid = 0200
# user for group 3 without monitor access, only one connection possible, AU disabled, multiple idents
#[account]
#user = user4
#pwd = password4
#monlevel = 0
#uniq = 1
#group = 3
#ident = 0300:000000,FFFFFF;0400:FFFFFF
#caid = 0300
Display More
Oscam.services
#
# definition of services
#
# format:
# [name]
# caid=CAID[,CAID]...
# provid = provider ID[,provider ID]...
# srvid = service ID[,service ID]...
[services1]
caid=0100
provid=000001,ABCDEF
srvid=0001,0002,000A,000B
[services2]
caid=0200
srvid=0003,0004,000C,000D
Display More
Oscam.Server
[reader]
label=123456.com
enable=1
protocol=newcamd
key=1212121212121212121212121212
device=123456.com,6004
user=peter222-2222
password=2222222
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccversion=2.1.2
cccmaxhops=10
cccwantemu=1
ccckeepalive=1
Display More
Oscam.conf
#
# main configuration
#
[global]
#-------------
# general
nice = -1
waitforcards = 0
preferlocalcards = 1
# if you DON'T WANT QboxHD leds use
# disableqboxhdled = 1
disableqboxhdled = 0
#-------------
# logging
disablelog = 0
maxlogsize = 1000
logfile = /var/oscam/log/oscam.log
disableuserfile = 1
usrfile = /var/oscam/log/user.log
#-------------
# monitor
[monitor]
port = 0
#port = 988
aulow = 120
monlevel = 1
#-------------
# web interface
[webif]
httpport = 8888
httpuser = user
httppwd = pass
httprefresh = 10
httptpl = /var/oscam/webif-template
httpcss = /var/oscam/webif-template/site.css
httpjsicons = 0
# access is allowed only from these IP
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,172.16.0.0-172.31.255.255,10.0.0.0-10.255.255.255
# access allowed from this dynamic client
#httpdyndns = myhostname.dyndns.com
#-------------
# DVB API
[dvbapi]
enabled = 1
boxtype = qboxhd
user = dvbapi_qboxhd
au = 1
# for "priority" and "ignore" edit conf/oscam.dvbapi
#-------------
# protocols
# these are used for oscam used as a SERVER
# if oscam is used as a CLIENT connecting remote server see oscam.server file
# --- protocols examples ---
#[cccam]
#port = 12000
#version = 2.0.11
#build = 1234
#reshare = 2
#[camd35]
#port = 30000
#suppresscmd08 = 1
#[newcamd]
#key = 000102030405060708090A0B0C0D
#port = 10000@0100:FFFFFF;10001@0200:FFF000,FFFF00;10002@0300:FFFFFF
#[radegast]
#port = 20000
#user = user1
#allowed = 192.168.0.0-192.168.255.255
#[cs378x]
#port = 30000@0100:FFFFFF;30001@0200:FFF000,FFFF00;30002@0300:FFFFFF
#[gbox]
#password = password1
#maxdist = 4
#cardinfos = card.infos
#ignorelist = ignore.list
#onlineinfos = online.infos
#locals = 01000000,02000000,0300FFFF
#[serial]
#device = user2@/dev/ttyS0?delay=1&timeout=300
Display More
as far as i am aware i only have to worry about the oscam.server file.
thanks for the reply,
my configs currently in use are below;
Oscam.user
#
# user configuration using oscam as SERVER for remote client
# (if you use oscam as simple CLIENT connecting remote server, see oscam.server)
#
# simplest account
#[account]
#User = john
#pwd = PASSword
#group = 1
# ============================================================
# DON'T CHANGE THIS USER: it manage EMM forward to readers
# You can enable/disable EMM forward to cards setting "AU"
# see docs/oscam.user
[account]
user = dvbapi_qboxhd
group = 1
au = 1
# ============================================================
# --- user examples ---
# user for group 1 with Betacrypt tunnel, no monitoring, only one connection possible, AU enabled
#[account]
#user = user1
#pwd = password1
#monlevel = 0
#uniq = 1
#group = 1
#au = reader1
#services = services1
#betatunnel = 0300.FFFF:0100,0400.FFFF:0100
#ident = 0100:000000
#caid = 0100
# user for group 2 with monitor access, AU enabled
#[account]
#user = user2
#pwd = password2
#monlevel = 1
#uniq = 0
#group = 2
#au = reader2
#services = services2
#ident = 0200:000000
#caid = 0200
# user for group 2 without monitor access, AU disabled, account disabled
#[account]
#user = user3
#pwd = password3
#disabled = 1
#group = 2
#services = services2
#ident = 0200:000000
#caid = 0200
# user for group 3 without monitor access, only one connection possible, AU disabled, multiple idents
#[account]
#user = user4
#pwd = password4
#monlevel = 0
#uniq = 1
#group = 3
#ident = 0300:000000,FFFFFF;0400:FFFFFF
#caid = 0300
Display More
Oscam.services
#
# definition of services
#
# format:
# [name]
# caid=CAID[,CAID]...
# provid = provider ID[,provider ID]...
# srvid = service ID[,service ID]...
[services1]
caid=0100
provid=000001,ABCDEF
srvid=0001,0002,000A,000B
[services2]
caid=0200
srvid=0003,0004,000C,000D
Display More
Oscam.Server
[reader]
label=123456.com
enable=1
protocol=newcamd
key=1212121212121212121212121212
device=123456.com,6004
user=peter222-2222
password=2222222
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccversion=2.1.2
cccmaxhops=10
cccwantemu=1
ccckeepalive=1
Display More
Oscam.conf
#
# main configuration
#
[global]
#-------------
# general
nice = -1
waitforcards = 0
preferlocalcards = 1
# if you DON'T WANT QboxHD leds use
# disableqboxhdled = 1
disableqboxhdled = 0
#-------------
# logging
disablelog = 0
maxlogsize = 1000
logfile = /var/oscam/log/oscam.log
disableuserfile = 1
usrfile = /var/oscam/log/user.log
#-------------
# monitor
[monitor]
port = 0
#port = 988
aulow = 120
monlevel = 1
#-------------
# web interface
[webif]
httpport = 8888
httpuser = user
httppwd = pass
httprefresh = 10
httptpl = /var/oscam/webif-template
httpcss = /var/oscam/webif-template/site.css
httpjsicons = 0
# access is allowed only from these IP
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,172.16.0.0-172.31.255.255,10.0.0.0-10.255.255.255
# access allowed from this dynamic client
#httpdyndns = myhostname.dyndns.com
#-------------
# DVB API
[dvbapi]
enabled = 1
boxtype = qboxhd
user = dvbapi_qboxhd
au = 1
# for "priority" and "ignore" edit conf/oscam.dvbapi
#-------------
# protocols
# these are used for oscam used as a SERVER
# if oscam is used as a CLIENT connecting remote server see oscam.server file
# --- protocols examples ---
#[cccam]
#port = 12000
#version = 2.0.11
#build = 1234
#reshare = 2
#[camd35]
#port = 30000
#suppresscmd08 = 1
#[newcamd]
#key = 000102030405060708090A0B0C0D
#port = 10000@0100:FFFFFF;10001@0200:FFF000,FFFF00;10002@0300:FFFFFF
#[radegast]
#port = 20000
#user = user1
#allowed = 192.168.0.0-192.168.255.255
#[cs378x]
#port = 30000@0100:FFFFFF;30001@0200:FFF000,FFFF00;30002@0300:FFFFFF
#[gbox]
#password = password1
#maxdist = 4
#cardinfos = card.infos
#ignorelist = ignore.list
#onlineinfos = online.infos
#locals = 01000000,02000000,0300FFFF
#[serial]
#device = user2@/dev/ttyS0?delay=1&timeout=300
Display More
as far as i am aware i only have to worry about the oscam.server file.
yes i did reboot after change
Thanks for your reply the config.server is a fresh copy created by the conversion tool.
I put in my nline then it converted it and provided me with the file.
I then dropped this via FTP onto the qbox in place of the original config.server
I then rebooted the box and navigated to an encrypted Chanel and nothing.
However when I start my qbox up I'm doing nothing else but pointing it at channels I just saw on a search something interesting. Do I have to start Oscam from the qbox. I assumed it would be running as soon as the box booted
Hi guys sorry im back again, That tool worked a treat and even saves it as oscam.server for you. So i replaced its output with the oscam.server currently on the qbox, but im still having problems viewing any of my cardshare services? am i required to edit anything else?
Ok Firstly sorry for any typo's its early and iv been banging my head on this qbox for a good few hours.
Im new to this and dont know my problem which makes it difficult to search (so sorry in advanced)
I have a Qbox Mini HD
I have flashed the Qbox with the image "Roy Image BKP QBOXHDMINI 19.12.2011"
this image already has Oscam on it.
I converted my N line i previously used on my dreambox with this tool "http://linuxsat-support.com/oscam-tools/2569-cccam-oscam-converter-latest-version.html" "please note i selected both old and new style tick box"
I converted my nline and saved it to my computer directly from the software.
I then uploaded this and replaced server.config on my qbox.
unfortunately im still un-able to view my cardshare
Can anyone tell me what else i need to edit since im obviously missing something, at a guess i think theres a few more files like user.config etc that need to be edited.
Any help would be greatly appreciated.
Regards
Cappilio
Thanks very much for a quick reply.
that explains it perfectly. i had seen that tool i just wasn't sure if that's exactly what i needed, sorry again.
Hi,
Firstly I have searched the forum so please don't flame me. im not sure exactly how to word what i am looking for in search so its probably already posted somewhere but i cannot find it.
I am new to all this for the last few weeks, i successfully got a dreambox working how i want and all is grand. However i came into possession of a QBox Mini a few days ago.
I believe i have done everything right so far.
i am using Roy-Image-BKP-QBOXHDMINI on it.
I ran a scan for satellites which took around 20 hours, but now i have a massive list of channels, GREAT.
I have an nline i use with my dreambox
"N: 12345678z.com 7115 peter238-1223 1234567 12 34 45 56 78 89 90 12 23 34 45 45 12 17"
But now if what i understand with correct i must present this in a different format for oscam? in "oscam.server"
# remote CCcam reader
#[reader]
#label = remote4
#protocol = cccam
#device = 192.168.0.5,45678
#account = login4,password4
#group = 4
#caid = 0400
#cccversion = 1.2.34
#cccbuild = 5678
My question is (and again im sorry you may have already answered this a million times but i was unable to search precisely enough)
exactly how do i take that information and insert it into oscam.server?
and is that the only config i need to change?
Any help would be greatly appreciated, also please note this has nothing to do with illegal card sharing the card being shared is perfectly legal.
Regards
Jamie Harrison