Thanks a lot!! It's working now!!
Posts by afoenis
-
-
Hello,
I want to change the SSH port and the FTP port. How can i do it ?
Thanks
-
First i would install webmin; Webmin
Then install ConfigServer Security & Firewall; ConfigServer Security & Firewall
Use Webmin to check the system logs and find the hackers ip address, then you can quick deny with ConfigServer Security & Firewall.
Port 80 is used for HTTP/apache, you`re not running a webserver so theres no need for this port to be open, close it.
Change SSH port 22 to something else less obvious to the hacker and open new port in ConfigServer Security & Firewall.
Setup a new FTP user and lock root access to the server.
If you need help with any of this let us know buddy.
Thanks a lot guys!! There is 1 think, he is using a nVPN, so it doesn't save any logs with his IP
-
What ports do you have open on your VPS network ?
I don't know all ports that are open, but i know for sure port 12000, 80, 22, 16001
-
Thanks mate, i will check it now!
-
Hello,
There is a hacking in my VPS Server that take everytime lines from my server. I saw the log file and found no IP, only mine, so he is using a VPN that doesn't log his IP. I already changed 4 times my password but he has everytime acces to my server. I scanned my PC with all different scanners and found no virus. Is there a way that only me can log in in my server ?
Thanks for the help!
-
OK, i will try it now. Thanks!
-
No but i don't think that this is the problem. I have CCcam 2.3.0 and i can't change to another version because only CCcam 2.3.0 can help my Tv Vlaanderen card with SID LIMIT. I deleted all my peers/clients and i have still same problem. Any help please ?
Thanks
-
Thanks you very much for your time master G! Hope we will find a solution. I sended you my log file to you via PM. Please check it and post here any ideas.
Thanks again! -
OK, now with the new config, i have 0% freeze, but i have still the problem that the server freeze in an hour
-
OK, im trying now the new config. I will report my results
Thanks!! -
When it freeze, CCcam freeze completely. So i have to reboot pc to start CCcam again
-
I have this config:
Code
Display MoreSERVER LISTEN PORT : ALLOW TELNETINFO: yes ALLOW WEBINFO: yes WEBINFO USERNAME : WEBINFO PASSWORD : TELNETINFO USERNAME : TELNETINFO PASSWORD : TELNETINFO LISTEN PORT : WEBINFO LISTEN PORT : ZAP OSD TIME : 0 #OSD USERNAME : #OSD PASSWORD : OSD PORT : 80 SHOW TIMING : yes DEBUG : yes NEWCAMD CONF : no DISABLE EMM : yes EXTRA EMM LEVEL : no MINI OSD : yes SOFTKEY FILE : /var/keys/SoftCam.Key AUTOROLL FILE : /var/keys/AutoRoll.Key STATIC CW FILE : /var/keys/constant.cw CAID PRIO FILE : /var/etc/CCcam.prio PROVIDERINFO FILE : /var/etc/CCcam.providers CHANNELINFO FILE : /var/etc/CCcam.channelinfo EMM THREADS : 1 SERIAL READER : /dev/ttyUSB1 smartreader+ SERIAL READER : /dev/ttyUSB0 smartreader+ Disable EMM : no SID LIMIT: /dev/ttyUSB0 4 11 GLOBAL EMM : 1 SECA HANDLER: 1 LOG WARNINGS : /tmp/warnings.txt
/dev/ttyUSB0 is Tv Vlaanderen
/dev/ttyUSB1 is JSC card -
Hello,
I have a Debian CCcam server. Everything is OK but after an hour CCcam freeze. It's a brand new server with just a few peers with very good ping;
Any help please ?
Thanks
-
Viaccess or Ir*****, can you post your cardreader config from CCcam.cfg please.
Thanks. I have a Viacces card. I updated my Smargo to 1.7. This is my config:
I tried this in my Dreambox and it's working perfect
-
Hello,
Before i had a dm7020 with my JSC card and i had no problems. Now i switched to Ubuntu but it doesn't read my JSC card but it reads all my other cards. Can anyone help me please ?
Thanks!
-
Sorry. Here is a log:
2012/06/12 23:00:42 1573 s reader started (pid=1591, device=/dev/usb/tts/0, detect=cd, mhz=357, cardmhz=357)
2012/06/12 23:00:42 1591 r04 restarting reader csat (index=2)
2012/06/12 23:00:42 1591 r04 ERROR opening device /dev/usb/tts/0
2012/06/12 23:00:42 1591 r04 Cannot open device: /dev/usb/tts/0
2012/06/12 23:00:44 1573 s reader started (pid=1592, device=/dev/usb/tts/0, detect=cd, mhz=357, cardmhz=357)
2012/06/12 23:00:44 1592 r04 restarting reader csat (index=2)
2012/06/12 23:00:44 1592 r04 ERROR opening device /dev/usb/tts/0
2012/06/12 23:00:44 1592 r04 Cannot open device: /dev/usb/tts/0
2012/06/12 23:00:46 1573 s reader started (pid=1593, device=/dev/usb/tts/0, detect=cd, mhz=357, cardmhz=357)
2012/06/12 23:00:46 1593 r04 restarting reader csat (index=2)
2012/06/12 23:00:46 1593 r04 ERROR opening device /dev/usb/tts/0
2012/06/12 23:00:46 1593 r04 Cannot open device: /dev/usb/tts/0
2012/06/12 23:01:27 1576 h Refresh Reader/Tiers requested by WebIF from 192.168.178.59
2012/06/12 23:01:28 1576 h Refresh Reader/Tiers requested by WebIF from 192.168.178.59
2012/06/12 23:01:29 1576 h Refresh Reader/Tiers requested by WebIF from 192.168.178.59
2012/06/12 23:01:36 1587 r02 ERROR opening device /dev/usb/tts/2
2012/06/12 23:01:36 1587 r02 Cannot open device: /dev/usb/tts/2
2012/06/12 23:01:41 1590 r03 ERROR opening device /dev/usb/tts/1
2012/06/12 23:01:41 1590 r03 Cannot open device: /dev/usb/tts/1
2012/06/12 23:01:46 1593 r04 ERROR opening device /dev/usb/tts/0
2012/06/12 23:01:46 1593 r04 Cannot open device: /dev/usb/tts/0
2012/06/12 23:02:36 1587 r02 ERROR opening device /dev/usb/tts/2
2012/06/12 23:02:36 1587 r02 Cannot open device: /dev/usb/tts/2
2012/06/12 23:02:41 1590 r03 ERROR opening device /dev/usb/tts/1
2012/06/12 23:02:41 1590 r03 Cannot open device: /dev/usb/tts/1
2012/06/12 23:02:46 1593 r04 ERROR opening device /dev/usb/tts/0
2012/06/12 23:02:46 1593 r04 Cannot open device: /dev/usb/tts/0 -
OK, everything is working fine but i get no photo, of the 3 locals no photo. ECM is not working, i get this in CCcam Info:
local 0100:00006c 4(0)
With all locals, anyone any idea ?
Thanks -
Thanks a lot!!! I will try it this evening and i will post my results. Thanks again!
-
No one ? :(