Hello. Anyone has those files updated? Thanks.
Posts by paconassa2021
-
-
That works for Gigablue UHD trio 4k using openatv? This is only for SKY DE…right?
-
Hello. Can someone explain how to install this Oscam 11714 EMU with icam dvbapi?
When downloaded the file is not ipk but txt. How to install it?
Appreciate if someone can explain step by step how to install on GigaBlue 4k with Openatv.
Thanks.
-
Dear friends. I got GIgablue 4k box with openatv and oscam and ncam with last versions installed on it, but last times when especially during football games the oscam fails, does anyone has the same problem? channels like SPORTV 1,2, BTV etc are working fine but when football game starts the screen goes black, the softcam is unable to open it...but other channels still working normally.
do the operators are changing codifications? anyone experiencing same issues?
thanks.
-
Hello.
Installed openPLI on my zgemma, after through telnet installed plugin (opkg install openvpn), everything was Ok and message saying installed show up.
After create folder using FTP on etc with name (directory /etc/openvpn) and inside put my surfshark credentials/password and Server location and saved.
Then went back to telnet and to start or stop VPN did followin commands:
my question is where or how i can see my VPN is connected??
I try through openpli menu but theres nothing there allow me see if vpn is connected or not, i guess by default is running because when switch on box it takes more time than before.
Its the correct steps for installing openvpn on openpli right?
thanks.
paconassa2021
-
RasJaras CCcam 2.3.9 on my Zgemma H9SSE with Openvix is freezing constantly each 30 seconds. probably you are using other E2 image and another STB brand. Oscam 11695 is working perfectly fine aswell cccam 2.3.2 and 2.3.8, the only that gives me problem is CCcam 2.3.9 and Ncam which I can install but cannot make it work.
But good to know cccam is working. Unfortunately in my particular case is freezing very often.
best regards.
-
Yawwilson thnaks for your advice...just checked, most of the backups only have oscam installed.
probably change image for another one will fix it...problem is weird and only happens on VIX images apparently other images are working fine guess.
best regards!!!
-
does anyone tested already this cccam? its stable or freezes sometimes like the previous one??
just installed and tested and keep freezing each 30 seconds...
thanks.
-
Hello. Even after the new version of VIX 5.4.014 released few days ago i still have the same issue like before. Not able to make Ncam work on my Zgemma H9S SE... keep given me the same error during installation and after when i choose which softcam want to use is there but when you tick to activate and become default and automatic when you boot box simply doesnt work...tried fresh installation, force installation plugin ipk, install libcurl etc all option and suggestions got from this forum but simply doesnt work.
Installing enigma2-plugin-softcams-ncam (V11.9) on root.
OE2.0 IMAGES: libssl.1.0.2
OE2.0 IMAGES: libcrypto.1.0.2
Configuring libcurl4.
/sbin/ldconfig: Cannot mmap file /lib/libcrypto.so.0.9.7.
/sbin/ldconfig: Cannot mmap file /lib/libcrypto.so.0.9.8.
/sbin/ldconfig: Cannot mmap file /lib/libcrypto.so.1.0.0.
/sbin/ldconfig: Cannot mmap file /usr/lib/libcrypto.so.0.9.8.
I guess there's some issue with this model of zgemma box or either the guys from Vix did install something to not allow people install Ncam maybe,
by default last vix image bring on the plugins latest Oscam 11965 only.
which Enigma2 images bring Oscam and Ncam already buikd in and allow you to install from the plugins??
best regards.
-
Yes...that what I though...Problems with VIX image...soon they will release new VIX version.
Thank you for your Help.
Regards.
-
Hello. fairbird i did fresh installation VIX. After using telnet i got this results. Something is wrong with ViX for Zgemma H9SSE box probably. the issue continues. The Ncam ipk is installed and appears on softcam manager, however when you press start and enable start ncam, says starting ncam ,theres circle spinning but is unable to activate... even on top sofcam menu says Activate: ncam doesnt appear there and it should. i have all the configs etc...its weird but doesnt work.
Probably in other boxes with same version VIX like some tested here on the forum is working, but in this box doesnt.
TELNET:
Welcome to OpenViX for zgemmah9sse
openvix 5.4 zgemmah9sse
zgemmah9sse login: root
Password:
root@zgemmah9sse:~# ls -n /usr/lib/libcrypto*
lrwxrwxrwx 1 0 0 18 May 18 23:47 /usr/lib/libcrypto.so.0.9.7 -> libcrypto.so.1.0.2
lrwxrwxrwx 1 0 0 5 Jul 15 08:05 /usr/lib/libcrypto.so.0.9.8 -> /usr/
lrwxrwxrwx 1 0 0 18 May 19 01:27 /usr/lib/libcrypto.so.1.0.0 -> libcrypto.so.1.0.2
-rwxr-xr-x 1 0 0 1391048 May 22 21:54 /usr/lib/libcrypto.so.1.0.2
root@zgemmah9sse:~# ls -n /usr/lib/libssl*
lrwxrwxrwx 1 0 0 15 May 18 23:47 /usr/lib/libssl.so.0.9.7 -> libssl.so.1.0.2
lrwxrwxrwx 1 0 0 24 Jul 15 08:05 /usr/lib/libssl.so.0.9.8 -> /usr/lib/libssl.so.1.0.2
lrwxrwxrwx 1 0 0 15 May 19 01:27 /usr/lib/libssl.so.1.0.0 -> libssl.so.1.0.2
-rwxr-xr-x 1 0 0 297492 May 22 21:54 /usr/lib/libssl.so.1.0.2
root@zgemmah9sse:~# /usr/softcams/ncam
-bash: /usr/softcams/ncam: No such file or directory
root@zgemmah9sse:~# ls -n /tmp/*.ipk
-rw-r--r-- 1 0 0 3923514 May 7 19:20 /tmp/enigma2-plugin-softcams-ncam_V11.9-r2_all.ipk
root@zgemmah9sse:~# opkg install /tmp/enigma2-plugin-softcams-ncam_V11.9-r2_all.ipk
Installing libcurl4 (7.66.0) on root.
Downloading http://www.openvix.co.uk/feeds…ortexa15hf-neon-vfpv4.ipk.
Installing enigma2-plugin-softcams-ncam (V11.9) on root.
OE2.0 IMAGES: libssl.1.0.2
OE2.0 IMAGES: libcrypto.1.0.2
Configuring libcurl4.
/sbin/ldconfig: Cannot mmap file /lib/libcrypto.so.0.9.7.
/sbin/ldconfig: Cannot mmap file /lib/libcrypto.so.0.9.8.
/sbin/ldconfig: Cannot mmap file /lib/libcrypto.so.1.0.0.
/sbin/ldconfig: Cannot mmap file /usr/lib/libcrypto.so.0.9.8.
Configuring enigma2-plugin-softcams-ncam.
:Your Device IS ARM processor ...
OpenVIX image
[ All Config Files found ]
-------------------------------------------------------
* Ncam Config & Softcam files in [/etc/tuxbox/config] *
-------------------------------------------------------
root@zgemmah9sse:~# /usr/softcams/ncam
/usr/softcams/ncam: error while loading shared libraries: /lib/libcrypto.so.1.0.0: cannot read file data: Error 21
root@zgemmah9sse:~#
Thanks for your time and Help.
best regards.
-
Ok. I will try that and see if fixes problem. thanks abu baniaz .
tried to install libcurl as you said and this appears:
package libcurl4 (7.66.0-r0) installed in root is up to date.
Just install VIX again, put everything again and same issue remains on Ncam. so...i will wait for next version Ncam ipk and vix version, just cant make it work even following all the advices here from the forum.
Thank you all for your time and help.
best regards.
-
abu baniaz I have the same Openvix release 5.4.013 which is the last available. do you have Ncam installed and working? i tried but no luck...cannot make it work.
-
Thanks for the advice... know there's a lot of images...but I like VIX. Its not a matter of E2 images, use to have 4 softcams installed and working...just trying figure out why ncam stopped working... I only have issues with Ncam...oscam and ccam 2.3.2/2.3.8 are working perfectly.
But maybe I will install other image since my box allow multiboot.
Cheers.
-
This are from my box:
root@zgemmah9sse: ~# ls -n /usr/lib/libcrypto*
/usr/lib/libcrypto.so.0.9.7 - libcrypto.so.1.0.2
/usr/lib/libcrypto.so.0.9.8 - /usr/
/usr/lib/libcrypto.so.1.0.0 - libcrypto.so.1.0.2
/usr/lib/libcrypto.so.1.0.2
root@zgemmah9sse: ~# ls -n /usr/lib/libssl*
/usr/lib/libssl.so.0.9.7 - libssl.so.1.0.2
/usr/lib/libssl.so.0.9.8 - /usr/lib/libssl.so.1.0.2
/usr/lib/libssl.so.1.0.0 - libssl.so.1.0.2
/usr/lib/libssl.so.1.0.2
root@zgemmah9sse: ~# /usr/softcams/ncam
/usr/softcams/ncam: error while loading shared libraries ; /lib/libcrypto.so.1.0.0: cannot read file data: Error 21
root@zgemmah9sse: ~# opkg install libcrypto
Package libcrypto 1.0.2 (1.0.2r-r0) installed in the root is up to date
i installed this symlinks via Telnet and in all of them says already exists, so supose all them are installed checked before so this is package 1.0.2.
ln -s /usr/lib/libcrypto.so.1.0.2 /usr/lib/libcrypto.so.0.9.7
ln -s /usr/lib/libssl.so.1.0.2 /usr/lib/libssl.so.0.9.7
ln -s /usr/lib/libcrypto.so.1.0.2 /usr/lib/libcrypto.so.0.9.8
ln -s /usr/lib/libssl.so.1.0.2 /usr/lib/libssl.so.0.9.8
ln -s /usr/lib/libcrypto.so.1.0.2 /usr/lib/libcrypto.so.1.0.0
ln -s /usr/lib/libssl.so.1.0.2 /usr/lib/libssl.so.1.0.0
however Ncam still not working no matter version ipk i install. i dont know if other people using openvix have same issue. or is a problem with Vix or with ncam ipk.
thanks. -
Thank you Fairbird for your suggestions and help. I'm gonna try them. Thanks!!
-
ok I will try. I guess the libcrypto_compat shoul already be installed on the box but not activated like Fairbird says. on the previous Vix version ncam worked fine...since updated to 5.0.13 this happened...anyway thanks for the solutions and suggestion...i will try put symlinks using telnet and see what happens, if fix the problem or not.
best regards.
-
So how do I Install libcrypto-compat on my zgemma H9SSE box?
any comand? or any pack ipk to install it?
how should i procceed?
telnet:
opkg install libcrypto-compat
or
opkg install libcrypto-compat_1.1.bb
or
opkg install libcrypto-compat_1.1_r0
after opkg install libcrypto-compat do I need to install symlinks or they will be automatically installed?
and regardind symlinks found this internet: eventually how do I install the symlinks on the box??
The symlinks can be added by the following command
ln -sf /usr/lib/libcrypto.so.1.0.2 /usr/lib/libcrypto.so.0.9.7
ln -sf /usr/lib/libssl.so.1.0.2 /usr/lib/libssl.so.0.9.7
ln -sf /usr/lib/libcrypto.so.1.0.2 /usr/lib/libcrypto.so.0.9.8
ln -sf /usr/lib/libssl.so.1.0.2 /usr/lib/libssl.so.0.9.8
ln -sf /usr/lib/libcrypto.so.1.0.2 /usr/lib/libcrypto.so.1.0.0
ln -sf /usr/lib/libssl.so.1.0.2 /usr/lib/libssl.so.1.0.0
thank you for your help. best regards.
Sorry i dont understand much about this subject.
thank you.
-
Hi. Tried to Install Ncam 11.9r2 normal way through FTP and even force installation using telnet but it wont work at all. I even try to use previous versions ipk on Openvix but says : installing enigma2 plugin softcam ncam v11.9 on root.
O.E2.0 Images: libssl.1.0.2
O.E2.0 Images: libcrypto.1.0.2
configuring libcurl14.
/sbin/ldconfig: cannot mmap file /lib/libcrypto.so.0.9.7./sbin/ldconfig: cannot mmap file /lib/libcrypto.so.0.9.8.
/sbin/ldconfig: cannot mmap file /liblibcrypto.so.1.0.0.
/sbin/ldconfig: cannot mmap file /usr/lib/libcrypto.so.0.9.8.
also only press blue button remote control, softcam manager and press to see informaton abut cams etc says ERROR: WEbif disabled. like i said i use vpn but on openwebif is enable access through VPN.
I have openvix updated to last Version. aparently plugin is installed , i can see it on softcam manager, ativate or deactivate... with configs and lines installed on etc/tuxbox/configs... but doesnt work.
If anyone has same issue or knows how to overcome please go ahead.
thank you.
best regards.
-
Ok.Thank You for your Help.