I tried the new version
enigma2-plugin-softcams-oscamicam_11.719-emu-r798_all.ipk
but SKY UK is not working for me
it shows opening channels but no picture
I tried on my solo 2 using openvix loaded ok but will will not show as active in softcam manager
Display MoreTo @Allusers
if you want download OSCam-11719 for your Device or STB
you will need just to take a look in the: table (first page)
then click on the corresponding Logo and you will be redirected
to the download area.
Thanks,
Will there be a ipk version soon
Is this available for openvix 6.3 on Z Gemma H9 twin Please
All working fine on Sky De with Solo 2 using latest openvix
I have just downloaded from the first link and it was V13.6 have a try again
Thanks for all your hard work but what is the difference between V9 and V12
Still not installing correctly crashed the box and and not showing active in softcam manager
Display MoreNew Update 11/05/2023
@ kitte888
OScam_ICam_11718_V9_11
enigma2-plugin-softcams-oscamicam_11718-V9-Kitte888-V11_all
Not working for me on Vu Plus Solo 2 V8 was fine now i have tried V11 and will not show active when it is installed
Thank you for your help i was looking for a program that would change the epg to english when i press the epg button but i must say the epg plugin does a very good job 
Hi all is there a EPG Translator ipk available for openvix 6.3 i have had a quick look but have not found anything up to date .Thanks
Display MoreTo answer my own question this version is for sky DE o
Display MoreI wrote about it above, that's only DE, need the patch for UK and IT
Satdreamgr
I'm just checking that with the image
the startscript is in etc/init.d/softcam.oscamicam , i have no problem
the 3 images have testet , is running
Thanks a lot @ kitte888 , it's working great on satdreamgr now with the newly attached ipk .
Sorry i know this has been asked before so does the modified ipk work with uk channels now
Here is my version of the sky uk 28.2e bouquet. Using a sat scan from last night. Obviously re-order it to your own preferences.
I think all the channels open in this list (if you have the requirements to do so). Couldn't fully test as I kept getting what I am calling the "Black screen of death" on my box. Which requires a full reboot.
Very impressive so do i just delete the current 28e bouquet and copy and paste the new one
Hdmi Cec was off volume was set to 90 and i am using a genuine VU plus remote
Display MoreI am more intrigued why your remote is turning up the tv volume and not the stb volume.
Are you using a different remote.
but you can also do this via the settings file?
telnet
init 4
edit settings file. /etc/enigma2/settings
Number being whatever you chose.
config.audio.volume=3
init 3
I set up the remote years ago so it would turn the volume up and down on the tv as well as the box but the volume control stopped working on the box
Hi all the volume on my Solo 2 has become very low the remote control only turns up the tv and not the box is there a way of putting the box volume back to max please
Display MoreDisplay MoreI had a few minutes spare, IPK installed and working fine on latest vix on both normal SD and Icam SD channels.
Have you enabled it in softcam manager and rebooted ?
So far i have either tested myself or had reports that the IPK works on ATV, VIX and PLI
CodeDisplay MoreInstalling libssh2-1 (1.8.2) on root Downloading http://downloads.openpli.org/feeds/openpli-8-release/armv7ahf-neon/l ibssh2-1_1.8.2-r0.6_armv7ahf-neon.ipk. Installing libcurl4 (7.66.0) on root Downloading http://downloads.openpli.org/feeds/openpli-8-release/armv7ahf-neon/l ibcurl4_7.66.0-r0.6_armv7ahf-neon.ipk. Installing enigma2-plugin-softcams-oscam (11718-emu) on root OE2.0 IMAGES: libssl1.1 OE2.0 IMAGES: libcrypto1.1 Configuring libssh2-1. Configuring libcurl4. Configuring enigma2-plugin-softcams-oscam. ================================================== :I'm checking your device processor ... :Your Device IS ARM processor ... OpenPLI image ================================================== :I'm checking your config OSCam ... send: oscam.conf ... file send: oscam.dvbapi ... file send: oscam.provid ... file send: oscam.server ... file send: oscam.services ... file send: oscam.user ... file send: CCcam.cfg ... file ================================================== update-rc.d is /usr/sbin/update-rc.d ------------------------------------------------------- * Oscam Config & Softcam files in [/etc/tuxbox/config] * ------------------------------------------------------- ******************************************* * Install Finished * * * * Need To Restart Enigma2 * * * * Icam compiled by Samur * * linuxsat-support * * * * IPK build by jenseneverest * * * * Script by MOHAMED_OS * * * * Linuxsat-support * *******************************************
Yes that would be a good idea if using multiple configs or 2 cams for example, this is just to help the basic users get up and running with either a fresh image or one without cams. Personally i only use one cam with one set of configs as it dose everything i need it to.
Ok what i will do is uninstall other cams i have installed currently Cccam and Ncamd and try a new install of Oscam to see if that works
After uninstalling all the other softcams and installing Oscam it loaded all ok and showed active in softcam manager but no option to stop or restart also icam not working and the box became very laggy and unresponsive so i tried Oscam on my Z gemma H9 twin with the same server and image and all works fine .
Display MoreI had a few minutes spare, IPK installed and working fine on latest vix on both normal SD and Icam SD channels.
Have you enabled it in softcam manager and rebooted ?
So far i have either tested myself or had reports that the IPK works on ATV, VIX and PLI
CodeDisplay MoreInstalling libssh2-1 (1.8.2) on root Downloading http://downloads.openpli.org/feeds/openpli-8-release/armv7ahf-neon/l ibssh2-1_1.8.2-r0.6_armv7ahf-neon.ipk. Installing libcurl4 (7.66.0) on root Downloading http://downloads.openpli.org/feeds/openpli-8-release/armv7ahf-neon/l ibcurl4_7.66.0-r0.6_armv7ahf-neon.ipk. Installing enigma2-plugin-softcams-oscam (11718-emu) on root OE2.0 IMAGES: libssl1.1 OE2.0 IMAGES: libcrypto1.1 Configuring libssh2-1. Configuring libcurl4. Configuring enigma2-plugin-softcams-oscam. ================================================== :I'm checking your device processor ... :Your Device IS ARM processor ... OpenPLI image ================================================== :I'm checking your config OSCam ... send: oscam.conf ... file send: oscam.dvbapi ... file send: oscam.provid ... file send: oscam.server ... file send: oscam.services ... file send: oscam.user ... file send: CCcam.cfg ... file ================================================== update-rc.d is /usr/sbin/update-rc.d ------------------------------------------------------- * Oscam Config & Softcam files in [/etc/tuxbox/config] * ------------------------------------------------------- ******************************************* * Install Finished * * * * Need To Restart Enigma2 * * * * Icam compiled by Samur * * linuxsat-support * * * * IPK build by jenseneverest * * * * Script by MOHAMED_OS * * * * Linuxsat-support * *******************************************
Yes that would be a good idea if using multiple configs or 2 cams for example, this is just to help the basic users get up and running with either a fresh image or one without cams. Personally i only use one cam with one set of configs as it dose everything i need it to.
Ok what i will do is uninstall other cams i have installed currently Cccam and Ncamd and try a new install of Oscam to see if that works
Display MoreOkay attached is an IPK i complied for TESTING - please post feedback of what works / dose not work.
It should work on all images EXCEPT SH4 based boxes like the alien 2
The IPK uses samur bin files and script files from MOHAMED_OS
This is for testing so as always backup your image before tests,
You should uninstall any versions of oscam EMU and reboot your STB then:
Install the IPK in the normal fashion, FTP to the /tmp folder and telnet issue this command:
Codeopkg install /tmp/*.ipkOnce done the STB will reboot, enable the cam with your remote control as per normal.
CodeDisplay Morelogin as: root root@192.168.0.28's password: root@vuultimo4k:~# opkg install /tmp/*.ipk Installing enigma2-plugin-softcams-oscam (11718-emu) on root. OE2.0 IMAGES: libssl.1.0.2 OE2.0 IMAGES: libcrypto.1.0.2 Configuring enigma2-plugin-softcams-oscam. ================================================== :I'm checking your device processor ... :Your Device IS ARM processor ... openATV image ================================================== :I'm checking your config OSCam ... send: CCcam.cfg ... file ================================================== update-rc.d is /usr/sbin/update-rc.d ------------------------------------------------------- * Oscam Config & Softcam files in [/etc/tuxbox/config] * ------------------------------------------------------- ******************************************* * Install Finished * * * * Need To Restart Enigma2 * * * * Icam compiled by Samur * * linuxsat-support * * * * IPK build by jenseneverest * * * * Script by MOHAMED_OS * * * * Linuxsat-support * ******************************************* root@vuultimo4k:~#You will still need to adjust your STB settings, and install an Icam channel list, SEE THE FIRST POST FOR FULL INSTRUCTIONS.
Display MoreOkay attached is an IPK i complied for TESTING - please post feedback of what works / dose not work.
It should work on all images EXCEPT SH4 based boxes like the alien 2
The IPK uses samur bin files and script files from MOHAMED_OS
This is for testing so as always backup your image before tests,
You should uninstall any versions of oscam EMU and reboot your STB then:
Install the IPK in the normal fashion, FTP to the /tmp folder and telnet issue this command:
Codeopkg install /tmp/*.ipkOnce done the STB will reboot, enable the cam with your remote control as per normal.
CodeDisplay Morelogin as: root root@192.168.0.28's password: root@vuultimo4k:~# opkg install /tmp/*.ipk Installing enigma2-plugin-softcams-oscam (11718-emu) on root. OE2.0 IMAGES: libssl.1.0.2 OE2.0 IMAGES: libcrypto.1.0.2 Configuring enigma2-plugin-softcams-oscam. ================================================== :I'm checking your device processor ... :Your Device IS ARM processor ... openATV image ================================================== :I'm checking your config OSCam ... send: CCcam.cfg ... file ================================================== update-rc.d is /usr/sbin/update-rc.d ------------------------------------------------------- * Oscam Config & Softcam files in [/etc/tuxbox/config] * ------------------------------------------------------- ******************************************* * Install Finished * * * * Need To Restart Enigma2 * * * * Icam compiled by Samur * * linuxsat-support * * * * IPK build by jenseneverest * * * * Script by MOHAMED_OS * * * * Linuxsat-support * ******************************************* root@vuultimo4k:~#You will still need to adjust your STB settings, and install an Icam channel list, SEE THE FIRST POST FOR FULL INSTRUCTIONS.
I have just tried to install on my Vu plus Solo 2 using latest Openvix install was ok but i cam on de and uk not working my end also Softcam Manager shows that Oscam has not started Thanks for your hard work and i hope this helps
Some images use usr/softcams
Ocam bin was in usr/softcam on openvix so all loaded now
Thanks i did mine with water based paint. i think i will repaited with oil based paint, matte finish of coure. how many aerosol did you use?
I painted a 1.2 mtr dish with one can easily
