hey guys, i have just got my server running oscam with CCcam protocol, the oscam i am using is OSCAM 1.20-unstable_svn build #7149
(32bit machine)
i have tried a few different files, but none seem to work, so i have to go back to oscam.old. i am using ftp and have given 0775 permissions, but still no luck.
how can i tell if i am getting the right file? i have a suspision i have been grabbing the 64bit file. :confuse:
Sorted guys. Got Oscam running. With CCcam protocol , cache averages at 29% does this sound about right? Gonna update my Oscam build now I think and play with skins and Pickons :)
Many thanks to everyone who has helped :)
ok so i am still cracking at this, in oscam.server do i need to keep the top reader? or do i just delete it from my file? the one that links oscam to cccam >
[reader]
label = 127.0.0.1
enable = 1
protocol = newcamd
key = 0102030405060708091011121314
device = 127.0.0.1,10000
user = linuxsat
password = support
group = 1
inactivitytimeout = 1
reconnecttimeout = 30
lb_weight = 100
cccversion = 2.1.2
cccmaxhops = 2
cccwantemu = 1
ccckeepalive = 1
thanks ten, left the users exactly as they were converted, but will change them now. and remote readers? as in the N;line supplyed to me? i have 2 locals running in oscam, (both have different labels however, but same caid)
have been doing a bit of reading, i have also used the converter, could somebody have a quick look over the configs. hopefully i am not a million miles off,
(the third reader is an n:line for setenta and espn. it converted like so... i am guessing i leave the originals intact?)
oscam.server
[reader]
label = slyuk
protocol = pcsc
device = 0
caid = 0963
ecmwhitelist = 0963:3E,41,42,44,45,47,4E,4F,5F,53,54,61,62,67,68,69,6A,6B,6C,6D,6F,70,71,72,73,74,76,77,78,79,7A,7C,7D,7E,80,85,8B,82,3B,66
detect = cd
mhz = 357
cardmhz = 357
ident = 0963:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1
lb_weight = 101
[reader]
label=127.0.0.1
enable=1
protocol=newcamd
key=0102030405060708091011121314
device=127.0.0.1,10000
user=linuxsat
password=support
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccversion=2.1.2
cccmaxhops=10
cccwantemu=1
ccckeepalive=1
[reader]
label=*******.redirectme.net
enable=1
protocol=newcamd
key=0102030405060708091011121314
device=*******.redirectme.net,*****
user=*****
password=*****
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccversion=2.1.2
cccmaxhops=10
cccwantemu=1
ccckeepalive=1
oscam.conf
[global]
nice = -1
logfile = /dev/null
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1
[webif]
httpport = *****
httpuser = *****
httppwd = *****
httprefresh = 5
httphideidleclients = 0
httpallowed = 192.168.0.0 - 255.255.255.255
debug = 255
# protocols
[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000
[cccam]
port = *****
nodeid =
version = 2.1.3
reshare = 1
ignorereshare = 0
stealth = 1
updateinterval = 120
lb_mode = 1
oscam.user
[account]
user=update
pwd=box
group=1
cccmaxhops=5
cccreshare=0
[account]
user=mum
pwd=pass243
group=1
cccmaxhops=5
cccreshare=0
[account]
user=dave
pwd=work1
group=1
cccmaxhops=5
cccreshare=0
[account]
user=button
pwd=moon
group=1
cccmaxhops=5
cccreshare=0
[account]
user=paint
pwd=shop
group=1
cccmaxhops=5
cccreshare=0
[account]
user=bedroom
pwd=box
group=1
cccmaxhops=5
cccreshare=0
Thanks ten. Will get my learning head on and read everything over and over until it sinks in. You guys must have a lot of patience to deal with characters like me haha
Having gone over your example above. Things have started to sink in. But I have a lot to learn. On the strength of the help I have received (again) I will be doing another donation to the site, the learning potential here is unbelievable.
True to my word :)
Receipt number:
4169-8666-9192-6375
Just want to say a thank you to wozbwfc also, your an asset to the forums
still not got my head around this guys. i have dloaded the convertor, 14 f:lines and 2 N:lines (1 nline is the link to oscam yes?... i have 2 locals on oscam, and 2nd N:line is for seteanta and espn......from another guys server traded n: for n:).......... totally lost how to set this up. :-/
Thanks guys. I have got the weekend off work so will see if I can get something working :)
Wow. You lost me completely there buddy, I got the general idea. So I can use Oscam only on my existing setup? Also do I need to do anything on the receiver itself (already active line in CCCam.cfg) or is it all done on my end?
Thanks. I am at work at the min also. But always have things going through my head. Want to start setting up the server when I get home. No idea where to start on Oscam only. But will get to searching, not in a rush mind. Will use my old server till new one is ready to plug and play :)
Hey guys, I am currently running a 32bit Linux unbuntu Oscam/CCcam server. This was my first server and has done a good job, but it is load and runs hot as its a very old and basic machine, I have a 64bit tower that I want to use instead. If I was to run Oscam only (as ecm's are high after broadband change, so getting shut of CCcam if poss) would I need to reconfigure my friends boxs? As they use cccam protocol? Or is there a way I am no aware off? Also is unbuntu the best OS with Oscam only?
heys guys, i am wanting to update oscam on my server. ecm times just havent been the same since i moved my BB to virmin.
i am currently running oscam 120 unstable 7209 (auto instal scripts) on my 32bit unbuntu machine,
can anyone recommend what oscdam version i could upgrade to (thought i would ask as newest isnt always best??)
and how would i go about the update? simple file swap......... or is it more involved?
thanks guys.
Post your configs buddy and help will soon follow
Quick update guys. After using the hub on its own for 2 days the ports would seem to close (whenever I would use my pc tower or even Xbox) so brought a Belkin d300 router. After setting up the connection was more stable (didn't randomly cut off) but cccam ECM time were still pretty high.
So I then downgraded from cccam to 2.2.1 to 2.1.3 and everything seems to have settled down.
Display MoreI use mine with a D link DIR-615 and its faultless. The wireless is lot better signal around the house and i never have any issues with it. I gave up trying to get the Super hub to work correctly after just a few hours.
It just doesn't do what you ask it to do. Put it in Modem only mode and connect another router upto it. I myself wouldn't recommend getting a Belkin router either. Belkin routers have given me endless problems in the past with slow speeds and dropping wireless connection all the time.
I've always had D-Link and Linksys Cisco routers and i have never had any issues at all with any of them.
Nano
thanks for your input, i have been looking at Linksys routers this morning and reckon thats the brand i am gonna go for, cant fault the speed i am getting, but think its a bit much for the hub to handle the speed and route requests maybe? will keep you guys posted on the outcome,.
thanks again for you help/opinions guys.
Thanks for the reply, might be worth me investing in a wireless router and using the hub as modem only as you say. Nothing to lose, don't think my ecm's can get any worse lol.
Does the hub run ok when in modem mode only?
hey guys,
when i got home from work last night, the wife told me that virgin had been and connected up my router,
so i put my server back online and made a couple of calls to my friends to tell them to plug there boxs in, after forwarding the ports on the superhub i powered up the server and everything appears to be fine. but when i look at the webif for CCcam 2.2.1 the average ecm time is 0.800.s and have seen them go over 1.000 however in oscam my ecm's appear to be normal 90-120ms
when i was using sly broadband CCcam ecm times averaged at 0.090.s :/
could this be down to the superhub?
i am using unbuntu/CCcam with omnikey and 0963 wired to superhub (same as before but without sly bb)
any advice would be gratefully recieved.
also did a sppedtest. broadband speed/upload seems to be consistant >
If it is connected to your network you could go into router settings and check out connected devices?
Channel list up to date on the f5? I only ask as I had a similar problem on my F3. Worked after a blind scan. So updated channel list.
Thanks guys. Think I will just stick with the hub then. Less messing and it's good to know people have got it working without a hitch on it own. I only have 13 ppl connected for shares so that shouldn't be an issue. Thanks guys.
