Posts by brendanj9554

Are you using Oscam/Cccam or Oscam only?
If you are using Oscam only there's no need for n:line. You see you have set up CCcam protocol via oscam so your friends can still connect with a C:Line

Make things simple until you have a friend connect.

Make sure the port that you use in the [cccam] section is forwarded in your router (to the I.p of your server/receiver)

Now edit a user, oscam.user cut out the bloat for now,

Just add
User
Pass
Group

Now give your friend a cline or test on your internal network

C: your local I.P port user pass

C: yourdns port user pass

The user should connect and have access to group 1 reader.

Get rid of services etc, you can add that stuff when you make the connection. Also double check that the cccam port is open on your router and your DNS is updated

Also I assume that the reader that your card is good?
Says cardok and has entitlements yeah?

If you get stuck I don't mind giving you some help via teamviewer

should be > N: 127.0.0.1 12345 linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

this is how it should be assuming your port number is correct. ignore my previous post as i copied the line you posted and amended it, (but forgot to remove port number before the key)

just having a bad day all around today lol

i think your N:line is wrong format, dns/port/user/pass/key

yours > N: 127.0.0.1 linuxxsat support 12345 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256 (linuxsat also spelt incorrectly)

should be > N: 127.0.0.1 12345 linuxsat support 12345 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

can you post an example of a cline your friends connect with, XXX out your dns and user/pass

Quote from Mee®kat

Crikey 0961/ old yellow house card i called them which brings back some memories as i think it was around 11 years ago we first seen them after slys encryption transition.

brendan hopefully that will be an roi card in that box as it could be a uk card but hopefully not. You will be able to tell what rom it is in oscam when you receive it anyway.

Hopefully because its just setanta etc your after they wont ask for details relating to the card because i,m pretty sure they would want a name and address confirmed matching where the card belonged to..think thats only for full pack mind you. You would only be phoning setanta too so no need to call sly ireland.

Good luck !

MK

Display More

cheers Mee®kat, i did ask the guy who was selling to confirm it was on an Irish sub before being used as freeview, and the card is original to the box. that's one hurdle..... will just have to see how i get on now :)

just purchased a Pace DS445NA Receiver with white card from Republic or Ireland auction site.

hopefully when i receive i can sub to Setanta :)

Doh! ...... The hunt continues

Hi guys. Still on the hunt for a ROI white card, however I can get my hand on the old blue card (yellow house) I have been told it's the 0961. Is it still possible to subscribe to setenta with this card or am I out of luck?

Any and all help/advice welcome.

Thanks chaps

I think this thread my be getting out of hand. If any members have any concerns/Querys regarding members and the running of payserver they should contact admin/mods.

**** like that sticks and without evidence..... A hunch could really damage a members reputation, not to mention other member will he afraid to ask for help on certain issues for fear of similar accusations.

I am not taking sides, but let's not let things get out if hand

He could always get an old sd receiver ready, phone sly and say his box has stalled on the update and won't turn in anymore. But he has got a spare box ;)

if you use loadbalancer clear stats, not founds etc etc, and see how it is then.

Quote from sync

brendan, I've got a white Irish card here that has been out of contract for a while and your welcome to it, if it is possible to sub via credit card and only provide them with the card number then your sorted, if they need an address as well then im sure google earth will help you, if not then I will ;)

have p.m you buddy, will sort you a few drinks for it ;)

Doh! Wish things were more simple

Wanting to sub to setanta Ireland, but need an Irish card, can't agree to pay upto £500 and a yearly sub. Would rather buy an Irish card and sub to setanta for £20 pm (with bt included ;)

Please pm if anyone has one for sale

Must be a faulty box. Tried on 2 televisions and different hdmi cables. The problem still remains. Even tried different resolutions, maybe I will go back to it one day.

Quote from canthackit

good this innit.

now I've just gone online and paired the card that went down in the "old Pace box"

that is now updating.

regards: canthackit

Display More

What box was your card paired with? And what model now? Interesting

Nano, I got a 5800sx and no matter what image I try the screen flickers on/off etc. is there a possibility I have a faulty box? I have even reflowed the tuner board, opened up to see if there was anything obvious, and the replaced caps had bad solder joints, but still same after reflow. (The glitchimg seems to be the output itself hdmi as it does it on loading screens also)

Would try scart, but even after switching to scart etc in settings it's a no go

Hi guys, hopefully somebody can help me with an issue I have been having on my solo2.

I have flashed the backup from Tenbelow, the latest vix backup, fantastic image and I will be sticking with it.

I have used bouquet maker for uk and Italia. I can allow send / receive files via Dreambox edit.

How can I add more bouquets? Also is there a way to keep them all current and up to date?

Or can backups (from other users) be used to send to the receiver?

Thanks in advance for anyone who can help

Quote from daveyboy

when I use no dult list they come mixed up, ie sports in movies, documentary in sports and so on.. any ideas?

the standard list has 'adult' as does the factory list.

so when you add a list that doesnt have a certain 'fav'' nothing will be in the original order.

update with the standard list and the problem goes away.

the only way to fix is to rename the fav folders.

Quote from crnjabl

Can anyone help me here? Still didn't solve high usage problem. Don't know if my cfg file is not configured properly!?

Current Usage (ECM requests/h) : 61599
Average Usage (ECM requests/h) : 1040480

Those peers that has high ecm usage, have 0% Ok ecms. It's all very strange.

Code

SERVER LISTEN PORT : xxxxx
#ALLOW TELNETINFO: no
#ALLOW WEBINFO: no
WEBINFO USERNAME : xxxxx
WEBINFO PASSWORD : xxxxxx
#TELNETINFO USERNAME : <username>
#TELNETINFO PASSWORD : <password>
#TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : xxxxxx
#ZAP OSD TIME : 0
#OSD USERNAME : root
#OSD PASSWORD : dreambox
#OSD PORT : 80
#SMARTCARD WRITE DELAY: /dev/ttyUSB0 6400000
#SMARTCARD WRITE DELAY: /dev/tts/0_7 8000
SMARTCARD CLOCK FREQUENCY: /dev/sci0 3570000
#BOXKEY: /dev/sci0 0B 55 B0 D2
SMARTCARD WRITE DELAY: /dev/sci0 10000
#SHOW TIMING : yes
#MINI OSD : yes
#DEBUG : yes
#NEWCAMD CONF : yes
#B: /dev/tts/0 07
#B: /dev/sci0 01
#DEBUG: no
#SHOW TIMING: yes
#DISABLE EMM: yes
#EXTRA EMM LEVEL: no
#EXTRA EMM LEVEL : yes
#EMM THREADS : 1
PIN: /dev/sci0 0000
# CAM KEY: /dev/sci1 00 00 00 00 00 00 00 00 
#CAMDATA: /dev/sci0 11 22 33 44 55 66 77 88 99 aa bb cc dd ee ff
#BEEF ID: 4101 0 0 0 0 0 0 0 /dev/sci0
#SOFTKEY FILE : /var/keys/SoftCam.Key
#AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
#LOG WARNINGS : /tmp/warnings.txt
#NEWCAMD STEALTH : 0
# LOADBALANCE : /dev/ttyS0 /dev/ttyS1 /dev/ttyS2

Display More

Display More

how many peers have you got? can you post a log?

maybe there is a bug? or maybe they are genuine requests.

we will be able to find out more if you post a log buddy