Connect the logic analyzer to the correct pins and configure Saleae Logic / PulseView to sniff the initial exchange between the decoder and the board.
To extract (or understand) the AES keys transmitted in clear.
f5103ff8-bde7-4e85-b210-89ddc9580e74.pngIMG-20250409-WA0002.jpg
explain to me what is AES Key AES Decrypt key 1 0500@060A00 (aka V 060A00 E1
AES Key Details
Type: Viaccess AES key (used in TNTSat / Canal Ready / Fransat E1 ECMs, etc.)
Length: 32 hexadecimal characters = 128 bits → valid format
Use: Applied to multiple Provider IDs and Keyslots
Provider and slots used in your line:
Slot Provider Probable Description
0500@041950 Viaccess TNT Sat (old slot? or PC7 clone)
0500@041960 Viaccess Same, PC7 slot variation
0500@041970 Viaccess Same
0500@041980 Viaccess Same
0500@FFF400 Viaccess Generic slot / PC7 placeholder
0500@042820 Viaccess Slot used on some TNTSat PC7 or Fransat cards (not officially certified)
Caution
This will not work with your genuine TNTSat V6 card, as it uses custom dynamic AES slots (often 0500@030B00:1A, etc.).
This feature is designed for use with pure EMU (without a card), often with patched firmware.
Conclusion
This BFB57F9F75D3430E0C047607D620CA44 key is:
Syntax valid
Compatible with EMU Viaccess PC7 configurations
Not needed for OSCam with your active V6 card
Display MoreDisplay More[lecteur]
étiquette = tntsat_v6
description = Carte TNT Sat V6
activer = 1
protocole = interne
périphérique = /dev/sci0
caid = 0500
ident = 0500:030B00
auprovid = 030B00
détecter = cd
MHz = 357
cardmhz = 357
groupe = 1
emmcache = 1,3,2
services = tntsat
the necessary ingredients are still missing
boxkey = 0........A
deskey = 4..............9
aeskeys = 05..................04
OSCam-EMU (or even a local TNT Sat card) does not use boxkey or deskey in this context.
| Card Type | AES | Boxkey | Deskey |
|---|---|---|---|
| TNT Sat V6 (030B00) | ✅ | ❌ | ❌ |
| Sky DE (09C4...) | ❌ | ✅ | ❌ |
| Viaccess Classic | ✅ | ❌ | ❌ |
Can the AES key be extracted from the ECM ?
As long as I don't have an AES key (TNTsat) nothing is possible.
We can clearly see that the card is recognized and valid, receives the ECM but does not find an AES key. What should I do?
I will use the Strong SRT7404 TNTSAT to activate my tntsat card and then I will use it in my Vu+ uno4k se.
Hi toysoft, I modified as you suggested but the card still does not activate the black screen.
[lecteur]
étiquette = tntsat_v6
description = Carte TNT Sat V6
activer = 1
protocole = interne
périphérique = /dev/sci0
caid = 0500
ident = 0500:030B00
auprovid = 030B00
détecter = cd
MHz = 357
cardmhz = 357
groupe = 1
emmcache = 1,3,2
services = tntsat
Now I'm trying this to activate the v6 card for the first time.
# oscam.server généré automatiquement par Streamboard OSCAM build-DreamOSat-1.20_svn SVN r11734-799
# En savoir plus : https://svn.streamboard.tv/osc…/doc/txt/oscam.server.txt
[lecteur]
étiquette = tntsat_v6
description = Carte TNT Sat V6
protocole = interne
périphérique = /dev/sci0
caid = 0500
ident = 0500:032830
auprovid = 032830
détecter = cd
MHz = 357
cardmhz = 357
groupe = 1
emmcache = 1,3,2
[lecteur]
label = émulateur
activer = 0
protocole = émeu
périphérique = émulateur
disablecrccws_only_for = 0E00:000000
caid = 0500,0604,0D00,0E00,1010,1801,2600,2602,2610
détecter = cd
ident = 0500:020A00,021110;0604:000000;0D00:0000C0;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000
groupe = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000
Si je ne me trompe pas, c'était Canal+ sur : 032830
030B00 est TNTSat et nécessite des clés AES, BOXID, etc.
TS
Le provid = 030b00 correspond à BIS TV , pas à TNT Sat.
Shall I test this?
ouscam server
[lecteur]
étiquette = tntsat_v6
description = Carte TNT Sat V6
activer = 1
protocole = interne
périphérique = /dev/sci0
caid = 0500
ident = 032830
auprovid = 030b00
détecter = cd
MHz = 357
cardmhz = 357
groupe = 1
emmcache = 1,3,2
Bonjour, je n'arrive pas à activé ma carte tnt sat v6 avec mon vu+ uno4k se .
oscam.config
[mondial]
fichier journal = /dev/tty
clienttimeout = 5000
fallbacktimeout = 2500
sympa = -1
taille maximale du journal = 100
[webif]
httpport = 8888
httpuser = root
httppwd = oscam
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
ouscam.server
[lecteur]
étiquette = tntsat_v6
description = Carte TNT Sat V6
activer = 1
protocole = interne
périphérique = /dev/sci0
caid = 0500
ident = 0500:032830
auprovid = 032830
détecter = cd
MHz = 357
cardmhz = 357
groupe = 1
emmcache = 1,3,2
ecmcache = 1
blockemm-inconnu = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
ouscam.user
[compte]
utilisateur = local
pwd = local
groupe = 1
au = tntsat_v6Hello, I can't activate my TNT Sat V6 card with my VU+ Uno4K SE.
