TNTSATPC7 config ok + black screen

so then 02.2026 its V6 deadline shutdown?

Quote from bigapple

so then 02.2026 its V6 deadline shutdown?

My TNT v6 is active until

TS

yes but new card V6 activation deadline. TNT no longer distribute V6.

Bonjour, je n'arrive pas à activé ma carte tnt sat v6 avec mon vu+ uno4k se .

Capture_tntsat.JPG

Capture_UNO.JPG

oscam.config
[mondial]
fichier journal = /dev/tty
clienttimeout = 5000
fallbacktimeout = 2500
sympa = -1
taille maximale du journal = 100


[webif]
httpport = 8888
httpuser = root
httppwd = oscam
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255


ouscam.server
[lecteur]
étiquette = tntsat_v6
description = Carte TNT Sat V6
activer = 1
protocole = interne
périphérique = /dev/sci0
caid = 0500
ident = 0500:032830
auprovid = 032830
détecter = cd
MHz = 357
cardmhz = 357
groupe = 1
emmcache = 1,3,2
ecmcache = 1
blockemm-inconnu = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0


ouscam.user
[compte]
utilisateur = local
pwd = local
groupe = 1
au = tntsat_v6

Hello, I can't activate my TNT Sat V6 card with my VU+ Uno4K SE.

test...???...marked in red delete

smargo does not need extra checks leave these parameters normal.

ouscam.server
[lecteur]
étiquette = tntsat_v6
description = Carte TNT Sat V6
activer = 1
protocole = interne
périphérique = /dev/sci0
caid = 0500
ident = 0500:032830
auprovid = 032830
détecter = cd
MHz = 357.........450

cardmhz = 357...2700
groupe = 1
emmcache = 1,3,2....0
ecmcache = 1
blockemm-inconnu = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0

If I'm not mistaken,... it was Canal+ on : 032830

030B00 is TNTSat, and needs AES, BOXID, etc. keys.

TS

Shall I test this?

ouscam server

[lecteur]

étiquette = tntsat_v6

description = Carte TNT Sat V6

activer = 1

protocole = interne

périphérique = /dev/sci0

caid = 0500

ident = 032830

auprovid = 030b00

détecter = cd

MHz = 357

cardmhz = 357

groupe = 1

emmcache = 1,3,2

Quote from toysoft

Si je ne me trompe pas, c'était Canal+ sur : 032830

030B00 est TNTSat et nécessite des clés AES, BOXID, etc.

TS

Le provid = 030b00 correspond à BIS TV , pas à TNT Sat.

Bonjour,

Le provid est correct. Il manque les informations indiquée au dessus.

Bonne journée:-)

Fransat/BIS, 0500:041950,041960,041970,041980,00FFF4,042820

TS

[reader]
label = FRANsat/BIS
protocol = internal
device = /dev/sci0
caid = 0500
boxkey = 01….2F
deskey = 22D6……E3
detect = cd
mhz = 534
cardmhz = 2700
ident = 0500:041950,041960,041970,041980,00FFF4,042820
aeskeys = 0500@041950:BFB57F9F….44;0500@041960:BFB 57F9F…44;0500@041970:BFB5….44;0500@041980:BFB57F9F….44; 0500@00FFF4:BFB57F…..44
group = 1
emmcache = 1,2,6,0
blockemm-unknown = 1
blockemm-g = 1
dropbadcws = 1
disablecrccws = 1
ratelimitecm = 4
ecmunique = 1
ratelimittime = 9000
srvidholdtime = 2000
cooldown = 30,600

Wrong, ident = 032830

Quote from amiral740

Je vais teste ceci ?

ouscam server

[lecteur]

étiquette = tntsat_v6

description = Carte TNT Sat V6

activer = 1

protocole = interne

périphérique = /dev/sci0

caid = 0500

ident = 032830

auprovid = 030b00

détecter = cd

MHz = 357

cardmhz = 357

groupe = 1

emmcache = 1,3,2

Display More

These keys are public, after starting oscam with these keys, card will die

boxkey = 01….2F

deskey = 22D6……E3

nano 0xDE (SidLimit)

80 3D D2 02 13 17 => nano 0xD2, clef Aes E17

40 07 03 0B 00 08 08 05 00 => nano 0x40, clef op 08, PC6.0

DE 04 57 33 76 1F => nano 0xDE SidLimit UNIX TIME

E0 02 00 02 => nano 0xE0 de pairing hw niveau 2

E2 03 48 AB 00 => nano 0xE2 date jour HEX class 00

E2 03 48 AB FE => nano 0xE2 date jour HEX class FE

EA 10 25 AF 93 B9 A9 01 64 CB 75 A6 64 5C 01 75 82 F0 => nano 0xEA ODD/EVEN CW

F0 08 2D 23 E4 8F E8 0C 68 25 => nano 0xF0 SIGNATURE

Quote from tommfarr

These keys are public, after starting oscam with these keys, card will die

boxkey = 01….2F

deskey = 22D6……E3

nano 0xDE (SidLimit)

80 3D D2 02 13 17 => nano 0xD2, clef Aes E17

40 07 03 0B 00 08 08 05 00 => nano 0x40, clef op 08, PC6.0

DE 04 57 33 76 1F => nano 0xDE SidLimit UNIX TIME

E0 02 00 02 => nano 0xE0 de pairing hw niveau 2

E2 03 48 AB 00 => nano 0xE2 date jour HEX class 00

E2 03 48 AB FE => nano 0xE2 date jour HEX class FE

EA 10 25 AF 93 B9 A9 01 64 CB 75 A6 64 5C 01 75 82 F0 => nano 0xEA ODD/EVEN CW

F0 08 2D 23 E4 8F E8 0C 68 25 => nano 0xF0 SIGNATURE

Display More

this is not for TNTSat (030b00), it's FranSat. So it's of no use for this person.

TS

tntsat needs box and deskey to work

Quote from toysoft

Quote from tommfarr

These keys are public, after starting oscam with these keys, card will die

boxkey = 01….2F

deskey = 22D6……E3

nano 0xDE (SidLimit)

80 3D D2 02 13 17 => nano 0xD2, clef Aes E17

40 07 03 0B 00 08 08 05 00 => nano 0x40, clef op 08, PC6.0

DE 04 57 33 76 1F => nano 0xDE SidLimit UNIX TIME

E0 02 00 02 => nano 0xE0 de pairing hw niveau 2

E2 03 48 AB 00 => nano 0xE2 date jour HEX class 00

E2 03 48 AB FE => nano 0xE2 date jour HEX class FE

EA 10 25 AF 93 B9 A9 01 64 CB 75 A6 64 5C 01 75 82 F0 => nano 0xEA ODD/EVEN CW

F0 08 2D 23 E4 8F E8 0C 68 25 => nano 0xF0 SIGNATURE

Display More

this is not for TNTSat (030b00), it's FranSat. So it's of no use for this person.

TS

Display More

thats incorrect as both providers are using FK . So if you wil put public key also your Fransat card will be disabled but only on paired channel.s

Quote from tommfarr

These keys are public, after starting oscam with these keys, card will die

boxkey = 01….2F

deskey = 22D6……E3

nano 0xDE (SidLimit)

80 3D D2 02 13 17 => nano 0xD2, clef Aes E17

40 07 03 0B 00 08 08 05 00 => nano 0x40, clef op 08, PC6.0

DE 04 57 33 76 1F => nano 0xDE SidLimit UNIX TIME

E0 02 00 02 => nano 0xE0 de pairing hw niveau 2

E2 03 48 AB 00 => nano 0xE2 date jour HEX class 00

E2 03 48 AB FE => nano 0xE2 date jour HEX class FE

EA 10 25 AF 93 B9 A9 01 64 CB 75 A6 64 5C 01 75 82 F0 => nano 0xEA ODD/EVEN CW

F0 08 2D 23 E4 8F E8 0C 68 25 => nano 0xF0 SIGNATURE

Display More

how then you will recommend to store private encrypted ecm which contain 3des key

Now I'm trying this to activate the v6 card for the first time.

# oscam.server généré automatiquement par Streamboard OSCAM build-DreamOSat-1.20_svn SVN r11734-799

# En savoir plus : https://svn.streamboard.tv/osc…/doc/txt/oscam.server.txt

[lecteur]

étiquette = tntsat_v6

description = Carte TNT Sat V6

protocole = interne

périphérique = /dev/sci0

caid = 0500

ident = 0500:032830

auprovid = 032830

détecter = cd

MHz = 357

cardmhz = 357

groupe = 1

emmcache = 1,3,2

[lecteur]

label = émulateur

activer = 0

protocole = émeu

périphérique = émulateur

disablecrccws_only_for = 0E00:000000

caid = 0500,0604,0D00,0E00,1010,1801,2600,2602,2610

détecter = cd

ident = 0500:020A00,021110;0604:000000;0D00:0000C0;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000

groupe = 1

emmcache = 2,1,2,1

emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000

Nope,

ident = 0500:032830

auprovid = 032830

That is not correct, the TNTSat cards v6 (old v5 and new v7) are 030b00

TS

Hi toysoft, I modified as you suggested but the card still does not activate the black screen.

Capture6.JPG

[lecteur]

étiquette = tntsat_v6

description = Carte TNT Sat V6

activer = 1

protocole = interne

périphérique = /dev/sci0

caid = 0500

ident = 0500:030B00

auprovid = 030B00

détecter = cd

MHz = 357

cardmhz = 357

groupe = 1

emmcache = 1,3,2

services = tntsat

Quote from amiral740

[lecteur]

étiquette = tntsat_v6

description = Carte TNT Sat V6

activer = 1

protocole = interne

périphérique = /dev/sci0

caid = 0500

ident = 0500:030B00

auprovid = 030B00

détecter = cd

MHz = 357

cardmhz = 357

groupe = 1

emmcache = 1,3,2

services = tntsat

Display More

the necessary ingredients are still missing

boxkey = 0........A

deskey = 4..............9

aeskeys = 05..................04

Hi,

You need the Lines above to get it working. No way around