If you want to insert screens into your skin, please do not use screen names ending with “_NS”.
The selection in the menu will then no longer work.
Change the skin setting in the menu to 'active skin' and the screens from the main skin will be used in the backtground.
thanks for your advise, actually was planning to add both (name and name_ns) because make it works with all images , anyway, i will try both options before publish it.
Again thanks for your support
i am trying to include HDFradio screens in my XDREAMY skin, just trying to refresh the look,
Now my question is, what is the correct screen names
HDFradio or HDFradio_ns?
If there are a direct screen codes will be much better
Moreover, i do appreciate the newly added Arabic section, is it possible to include the list shared by
hdfradio_userlist with ± 500 Arabic radio streams
add list to
/etc/enigma2/hdfradio_userlist
switch list with blue button - Main list to Favourites list
As it written in Arabic letters and include more music not only radio stations
Regards
Hi Mahmoud, thank you for the advice.
I have done it a few times on both boxes but it did not work.
Please let me know if there are any other methods.
Which red key you pressed during the process, normally each rc has two red keys, one for power menu and second for functions,
Try each one separately, make sure you turn on the box while you press and hold your rc key and too close to your ir receptor or the front box screen
still hope to get telnet command to install the emulator without install anything else, you already have the idea in your multicam manager
let me suggest something out of the box.
This behaviour similar to Bluetooth rc of Chinese boxes
So try
Turn your box from power plug ( disconnect it from power source).
Wait 15 sec
Connect it to power while press and hold red key on your remote
It should flash for few seconds
If everything goes well it should working now on one box.
hdfradio_userlist with ± 500 Arabic radio streams
add list to
/etc/enigma2/hdfradio_userlist
switch list with blue button - Main list to Favourites list
wow, this is exactly what i am looking for, this is very nice👌
Thanks
Display MoreCreate a working hdfradio_userlist_arabic by yourself and upload it here .
So then the HDF Radio devs might be kind enough to include your list in the main list too.
like :
4097_0_0_0_0_0_0_0_0_0_20250810090522.jpg
You can find many other stations here : https://onlineradiobox.com/gen…/?cs=ae.shoma934&played=1
Thanks for your comment, actually I am new user for hdfradio and try to listen to some traditional Arabic songs and find nothing,
I am looking for something like amr diab radio, umkalthum radio and so on
Any news or progress about Arabic contents? I wish if we can listen to Egyptian songs or Arabic radio....
where can download??
Last version
Hope you enjoy it
Regards
XDREAMY skin
100 % comply with openvix last version
You should have OpenHDF installed in some slot.
It’s crazy, but this image contains the file "picon_default.png" in the "picon" directory, which causes many skins and images in other slots to lose their PIcons.
Delete it, and as if by magic, all the PIcons will appear.
Take a look at my related post #479.
I was sure that the slots were independent. Maybe there are other things I don't know about? Thank you very much for your help!
giorbak you have booked your place in heaven with such information 😂
Display Moreclean your fstab and add only mounts you need
min
rootfs / auto defaults 1 1
proc /proc proc defaults 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
usbdevfs /proc/bus/usb usbdevfs noauto 0 0
tmpfs /var/volatile tmpfs defaults 0 0
none /dev/shm tmpfs defaults,rw 0 0
I think the problem was usage of multiple contents instead of templates, it was a trial from my side to standardized the list across the skin.
Do we have text reference instead of the current names like (size, device,... etc)
I am not sure if it's a common problem, but recently I got this issue: my device manager goes into continuous error like below, even with the correct fstab data
rootfs / auto defaults 1 1
proc /proc proc defaults 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
usbdevfs /proc/bus/usb usbdevfs noauto 0 0
tmpfs /var/volatile tmpfs defaults 0 0
none /dev/shm tmpfs defaults,rw 0 0
/dev/mmcblk0p16 /media/Flash auto defaults 0 0
/dev/sda1 /media/hdd auto defaults 0 0
UUID=962504c4-0847-49a7-b3ec-c671d9e86754 /media/hdd auto defaults 0 0
UUID=9700ff1d-2d79-405a-8f0f-4dcff2b82de2 /media/hdd auto defaults 0 0
UUID=6cf36208-94e8-413a-9679-99c6718ccc31 /media/sda2 auto defaults 0 0
UUID=4d6a5e37-02bb-44d2-a8c4-3abb0ad1c477 /media/sda4 auto defaults 0 0
UUID=acbda118-e18f-4bb8-9b64-88bd4742be94 /media/sda6 auto defaults 0 0
UUID=7ed7b4a7-85ea-431b-b913-378d1ea76e21 /media/sda8 auto defaults 0 0
UUID=9cc706df-f98b-4b95-bc5f-34d66837d6ab /media/sda10 auto defaults 0 0
UUID=53c62f1d-46b8-4803-8001-69f3b3d00ee7 /media/sda12 auto defaults 0 0
UUID=b70790d7-d791-47ea-9231-1d4ceb3ae537 /media/sda14 auto defaults 0 0
UUID=e25d51e8-7972-4a7b-a8a3-290c724c5689 /media/sda16 auto defaults 0 0
UUID=6ebb68c0-77bb-4fbd-a1fa-4cdb14655f21 /media/sda18 auto defaults 0 0
UUID=01b7377d-adf1-4d39-a959-ed7fe6d9f931 /media/sda20 auto defaults 0 0
UUID=89fdab64-db54-44de-882d-04765d80d134 /media/sda22 auto defaults 0 0
UUID=d13a3407-f9f5-4940-93fe-0ccc1ce60f49 /media/sda24 auto defaults 0 0
UUID=2851fae3-9041-49cc-8266-c4b07186f83a /media/hdd auto defaults 0 0
UUID=4fbd3875-0bfb-40ae-a7b2-3ef04a85ae41 /media/usb auto defaults 0 0
want to try some other skins for openvix
can't find any that fit openvix that's why I'm asking you
try XDREAMY it 100% fit
it would be nice to make a list of which are only for
openvix 6.7
what do you think about that idea
Why you target skins only for openvix 6.7?
Thanks for your great image, working perfect for me.
Another thanks for menu numbers and icons it look great
Display MoreDisplay MoreDisplay More
hyperion-X.2-sf8008-git34364-svn4994_mmc by zukon 19/07/2025 ( Unofficial )
- OE-Alliance 5.6
- GIT-34364
- zukonMOD SVN4994
- Gstreamer 1.26.2
- Python 3.13.5
- Kodi 22
- jowownloader corrections
- Many corrections adapting the image and plugins to OE-ALLICE 5.6 and Python 3.13.5
- current drivers
- a lot of corrections in compile and image caps
Login: root
Password: PKteam
Thanks zukon
https://mega.nz/folder/tLYwSCw…iQoiJxWFQ/folder/UbJ33JLJ
Thanks Ahmed for your great efforts, I think you should give a try to Tnap image, it offer a very good experience with sf8008 4k compared to other common images.
Regards
My brother
Thank you For every thing , I tried it, but it is not the most recent that it is still Python 3.12.8 I will work a topic for it to those who love to try
Thanks, bro,
There are many other images based on the pli base that are older in the Python version, but on my octagon, it is rare to find a pli base image without fluctuation in the picture.
