Posts by theblueirish

Above is good info but i would look into loading enigma2 on the box, so much more fun.

I use Oscam. Do you know what cams are installed on the image you are using?
how i would do it if oscam is installed.
type ip adress of box and oscam port into address bar, will probably look something like this. 192.168.1.25:8888
Across the top bar you will see a few words similar to: status, live log, config, readers, users, services, files ....... ....... ..... ...
Click files, then click oscam.server
your c:line is broken into pieces something like this c: severname.com 12000 username password

copy and paste this file and replace details from your c:line.

[reader]
label = remote
protocol = cccam
device = servername.com,12000
user = username
password = password
inactivitytimeout = 1
group = 1
cccversion = 2.1.2
ccckeepalive = 1

hes not at home at the minute so i cannot teamviewer into his laptop, but probably oscam ymod 1854

This is my brothers box, used as a client only no server, no reshare.

http://www.streamboard.tv/oscam/ticket/3252

not just me.

yeah, the fix9993 is strange as its a fix for caid0919

- - - Updated - - -

Quote from master G

What ports are open on the brothers box / router ? If he is only a peer and doesn`t have a server then no ports should be open..

no ports open

first time i changed it, it changed back when i checked a few mins later. changed it an hour ago and hasnt changed yet.

Hi all,
Got a strange one, my brothers box has started to change its oscam server file and has been freezing alot theis last week or so. the bits in red are writing themselves to the oscam.server file.
Any reason its doing this?
If i delete them then it wries itself again.

[reader]
label = remote
enable = 1
protocol = cccam
device = *******,*****
key = 0102030405060708091011121314
user = k****
password = k****
inactivitytimeout = 1
reconnecttimeout = 737173152
fix9993 = 0
group = 1
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
lb_weight = 100
cccversion = 2.1.4
cccmaxhops = 5
cccmindown = 0

2015/05/27 20:43:07 76C794B8 c (ecm) d (0960&000000/FFFF/2581/78:0311E155381954E66B47B4303F62EDFE): found (302 ms) by reader- RTÉ One
2015/05/27 20:43:07 76C721E8 c (ecm) k (0960&000000/FFFF/2581/78:0311E155381954E66B47B4303F62EDFE): cache2 (334 ms) by reader - RTÉ One
2015/05/27 20:43:07 76C89D58 c (ecm) w (0960&000000/FFFF/2582/78:0311E155381954E66B47B4303F62EDFE): cache2 (336 ms) by reader - RTÉ Two

Had this issue before but was solved with a oscam revision. Have tried updating oscam but to no avail. at the minute rte1 works ok but rte 2 is blank.

any ideas?

mods feel free to move if you think better suited to another area as may not be an oscam issue.

- - - Updated - - -

Does anyone thing it may be possible that the rte fix applied in earlier version of oscam was only for 0963? and that maybe a new revision is needed for 0960?

Quote from stevejo

Are you sleepysleep like ????

nah just to lazy to change the reader name, trying a cloud ibox2 now

- - - Updated - - -

in cloudibox2

2015/04/16 16:09:33 853548 c (ecm) ***** (0960&000000/FFFF/157E/63:F88E1257D117B458CCC30ECAF8528183): found (96 ms) by justforstevejo
2015/04/16 16:09:34 6F2650 c (ecm) ***** (0960&000000/FFFF/107D/63:3A2A4024CCD4CCF2012FDA62CEDA600C): found (100 ms) by justforstevejo
2015/04/16 16:09:35 83EEB8 c (ecm) ***** (0960&000000/FFFF/197B/63:58BF95B7CFF38175FC4DFAEE47E9F8A4): found (98 ms) by justforstevejo

- - - Updated - - -

configs for internal reader:
[reader]
label = CHANGE YOUR LABEL NAME
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 0960
ecmwhitelist = 0960:16,27,2B,2E,34,36,3B,3D,3E,41,42,44,45,47,4B, 4E,4F,50,51,53,54,56,57,58,59,5D,5E,5F,60,61,62,63 ,64,65,66,67,68,69,6A,6B,6C,6D,6E,6F,70,71,72,73,7 4,75,76,77,78,86,79,7A,7B,7C,7D,7E,7F,80,82,84,85, 89,8B,8F,90,99,9A,9B,9C,9F,A2,A8,AC,AD,AE,B0,B4,B7
boxid = ********
detect = cd
mhz = 600
cardmhz = 600
ident = 0960:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
lb_weight = 110

working in vu duo

2015/04/16 13:39:43 76D00F68 c (dvbapi) Demuxer 0 new program number: 125F (Sky One) [pmt_list_management 3]
2015/04/16 13:39:43 76D00F68 c (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 2
2015/04/16 13:39:43 76D00F68 c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0960 PROVID 000000 ECMPID 0506 ANY CHID PMTPID 0101 VPID 0201
2015/04/16 13:39:43 76D00F68 c (ecm) linuxsatsupport (0960&000000/FFFF/125F/63:9BB81FDC734543B598D2DE5D5544E10B): found (108 ms) by Sleepysleep
2015/04/16 13:39:47 76D00F68 c (ecm) linuxsatsupport (0960&000000/FFFF/125F/63:4C544BCE3B70D54ECB40C994909F784A): found (100 ms) by Sleepysleep
2015/04/16 13:39:55 76D00F68 c (ecm) linuxsatsupport (0960&000000/FFFF/125F/63:01763360BDB45C212556A5494D702135): found (102 ms) by Sleepysleep
2015/04/16 13:40:03 76D00F68 c (ecm) linuxsatsupport (0960&000000/FFFF/125F/63:E82A4FBCB6F6D29A0B5EEDCF7BEEBD2F): found (101 ms) by Sleepysleep
2015/04/16 13:40:11 76D00F68 c (ecm) linuxsatsupport (0960&000000/FFFF/125F/63:938B1F6003E2559D1704E6F312F3D46B): found (102 ms) by Sleepysleep
2015/04/16 13:40:19 76D00F68 c (ecm) linuxsatsupport (0960&000000/FFFF/125F/63:1A48902FBCF048EE269F8CC4A920A02A): found (102 ms) by Sleepysleep
2015/04/16 13:40:27 76D00F68 c (ecm) linuxsatsupport (0960&000000/FFFF/125F/63:37DE9F71E6CB9DCFB0332514DF609CC4): found (102 ms) by Sleepysleep

- - - Updated - - -

and clients connected:

2015/04/16 14:12:41 76E7B688 c (ecm) **** (0960&000000/FFFF/1B5A/63:26592EEDD43E1C45291165B598915023): found (96 ms) by Sleepysleep
2015/04/16 14:12:41 76E599A8 c (ecm) **** (0960&000000/FFFF/1965/63:270AC93FF2CC8B4B869987B3BC6E2604): found (131 ms) by Sleepysleep
2015/04/16 14:12:43 76E575A8 c (ecm) linuxsatsupport (0960&000000/FFFF/10CF/63:3183B3C609B50C5A93787EE6F087B175): found (100 ms) by Sleepysleep
2015/04/16 14:12:48 76E77F78 c (ecm) **** (0960&000000/FFFF/1134/63:8D23183130DED29A84EEF40E267D1287): found (95 ms) by Sleepysleep
2015/04/16 14:12:49 76E7B688 c (ecm) **** (0960&000000/FFFF/1B5A/63:3733929D54C194F6A4004405D2075188): found (95 ms) by Sleepysleep
2015/04/16 14:12:49 76E599A8 c (ecm) *****(0960&000000/FFFF/1965/63:BB3B8B75859C2CC95893DF7147B9CB98): found (131 ms) by Sleepysleep

if running this in internal reader would i change the protocol to internal?

great will try that as soon as i get a chance

just had a new red card and have it paired to a thompson SD box, works ok in original box but not showing any entitlements in oscam or cccam.
does it need any settings changed in oscam?
Any suggestions?

ah ok Ten, it just seems to be alot slower than cache1

I have been having problems with high ECm times in cache2,

At the minute i am watching BT sports which my card has in local but it is bringing the ecm in on cache2

2015/03/07 13:13:29 71EFB8 c anonymous (0963&000000/FFFF/C4BD/3B:9E6B4D955DDACB8148E8C025AEE9C9DF): cache2 (516 ms) by ***UK - BT Sport 1

I thought that cache2 meant it was coming from one of my peers cache but I have disabled all peers.

oscam.conf

have 2 prefer local cards above cache ex ticked

[global]
serverip                      = 192.168.0.2
logfile                       = /var/log/oscam/oscam.log
clienttimeout                 = 10000
nice                          = -1
maxlogsize                    = 3000
preferlocalcards              = 2
readerrestartseconds          = 1
block_same_ip                 = 0
usrfile                       = /var/log/oscam/oscamuser.log
cwlogdir                      = /var/log/oscam/cw
lb_mode                       = 1
lb_nfb_readers                = 3
lb_reopen_seconds             = 200




[cache]
max_time = 15
max_count = 2000
wait_time = 200




[cccam]
port                          = 12000
nodeid                        = E3AACFED10D1165E
version                       = 2.1.3
reshare                       = 1
stealth                       = 1
updateinterval                = 120




[dvbapi]
enabled                       = 1
au                            = 1




[monitor]
port                          = 12000
aulow                         = 120
monlevel                      = 1
hideclient_to                 = 15




[webif]
httpport                      = 8888
httprefresh                   = 1
httpallowed                   = 127.0.0.1,192.168.0.1-192.168.254.254
aulow                         = 120
hideclient_to                 = 15

I have it named without the square brackets.
need to block adult and asian as i seem to be getting a lot of requests for them. but ecm times are def quicker so far.

replace this?

[reader]
label = card
protocol = internal
device = /dev/sci0
services = !hdblock
detect = cd
mhz = 2700
cardmhz = 450
group = 1
emmcache = 1,3,15
blockemm-unknown = 1
blockemm-g = 1

- - - Updated - - -

so far so good, have to take daughter to pub, let you know how it goes in 30. If your not about HNY and thanks for all the help this year.

detect: cd
mhz 2700
autospeed: ticked
card mhz 450

using a vu duo, think openpli on it, cant remember 100%

If i remember correctly it was something simple that you were over looking (maybe card mhz)?
This is a new box this time (its in my sisters house) how do i enable autospeed?
I was leaning towards clients looking for hd requests hanging the router, have added hd block but not 100% sure its working,