Posts by chiccarello

I tries 4 USB flash but no one with success. In a old drawer I found a very old but successfully 1GB memory that save the box.

One more time thanks for your kind suggestions

and thanks to LINUX sat support friend

thanks for your effort :(

Changing the USB flash with another one with 1 GB (today very rare) and FAT32 I has been able to flash the box by USB.

I really want to than you all of You for the support

do you mean QVIART LUNIX CO ?

Qviart is not present in the selection menu.

How can I do it?

Usb is mounted. I don't care about settings

where is the image?

a picture of TV or the terminal? The TV is freezed to GUI boot screen (62%). The terminal is correctly attending commands (SSH running)

maybe it is absolutely impossible to flash a new LINUX CO image, BY TELNET on my box :(

exactely this is my trouble. The usb is the only one connected :(

first of all I'd like to thank you so much for the support messages, even though actually those messages not yet resolved the issue.

It is very strange that I 'm not more able to boot from USB with a fresh image. Can you suggest a way to modify the boot sequence (USB as first)?

my box stucks when the GUI is starting (at 62%) cyclying from 50% and 62%

rm: can't remove '/newroot': Device or resource busy

this message is suspected:

mkdir: can't create directory '/newroot': File exists

ofgwrite -r -k /media/hdd/update

This was the receiver reply after unzip the update file in the usb key (/media/hdd/update)

this the receiver reply:

mkdir: can't create directory '/newroot': File exists

ofgwrite Utility v4.6.8

Author: Betacentauri

Based upon: mtd-utils-native-1.5.1 and busybox 1.24.1

Use at your own risk! Make always a backup before use!

Don't use it if you use multiple ubi volumes in ubi layer!

Flashing rootfs

Flashing kernel

Searching image files in /media/hdd/update resolved to /media/hdd/update

Found UBIFS rootfs

Found mounted /newroot

Found mounted /newroot

Found /proc/mtd entries:

Device: Size: Erasesize: Name: Image:

mtd0: 0efc0000 00020000 "rootfs"

mtd1: 0efc0000 00020000 "rootfs(redundant)"

mtd2: 00a00000 00020000 "kernel"

Using kernel mtd device: /dev/mtd2

Using rootfs mtd device: /dev/mtd0

Read /proc/cmdline

Kexec mode is:

Current rootfs is: ubi0:rootfs

Current kernel is:

Current root sub dir is:

Error: Cannot flash kernel, because no kernel file was found

Did you mean the UPDATE folder on the zip file? I could send it by telnet to the tmp folder

Qviart Lunixco (Enigma2)

the strange thing is that I 'm not more able to falsh a brand new image by USB memory card. Can You suggest a Method to boot from the usb (change the boot sequence by telnet)

already done without success. I need to come back to factory reset, by shell commands