Posts by stevejo

If you are using a whitelist try remove it and see if that works , beware putting your card back in the original box, also bear in mind that boxnation has changed srvid to D809

Steve

Did you telnet the commands to the box ?Are all your connectors to the drive/box pushed home properly ?is this a new drive or is it knowing to have worked previous to you putting it in the box ? if you have any doubts with the drive or telnet connecting to your box i would remove it and hook it up to a pc if none of this has worked for you and delete all partitions and create a new one format it and put it back in the box , may be faster for you

Steve

Quote from cortexx066

Hi

Sorry for replying to someone elses thread.

I also have the same question.

I'm in the UK, what size dish would I need to get al jazeera PL channels and 3pm games?

Thanks

Display More

It depends where in the uk you are talking about and one other thing is you havent had a look at the site rules please pay attention to rule 1 , when someone comes to your house would you be happy if they just walked in? , we all have to live by them :taxman:

Quote from ahmeddriss

Hello
i have installe blackhole 2.0.3vu uno in flash and hdd
but when i use dcc i get the message ftp disconnected(telnet connected).
help me please

Please have a read at the rules , rule 1 is the one you need to pay most attention to :taxman:

menu/setup/system/harddisk/initialisation if you have a look there should sort you out

Steve

Quote from GearChange

thankyou so much for this, it was driving me crazy. everything up and running fine now :)

Introduction should be your first stop be sure to go there you have been a member almost a year so it is not like you dont know where to go please pay attention to rule 1 or this visit may be short lived :taxman:

What one did you download this link will open the download for 7.2 and its an ipk Forum Gateway - Powered by DnP Firewall

Quote from GIUVANN

for friends who have the problem with spark that will not start

Please read the forum rules and post your introduction :taxman:

Quote from Garry Breezer

I'm getting an error oscam: /lib/libc.so.6: version 'GLIBC_2.14' not found (required by oscam)

Any ideas?

3 posts in 3 years bud and no introduction post yet it would be nice to follow the rules since you will be getting well educated here for free its nice to be nice :thumbsup:

0000 6666 3313 7890 are some of the codes that i know of if it is the pin its asking for otherwise try a different usb stick

You would be better with with a wifi adapter and a 3 mifi router if you intend to use it without broadband have used openbox this way at our caravan worked perfectly

Harley you have that part in post 18 bud

Quote from harley22

Thanks. I have no password there - and I thought the clock speed was 3570000 not 6000000 plus.

Not sure what I should leave out of the config files if I want to display them. Please see pm box. Hope you can help me further.

At present, I cannot get port 8888 working at all, bt 16001 is working but won't show any entitlements.

The card reading data is showing in "oscam.mem" and a file "ecm.info" shows current channel ecm data.

Thanks for your help.

Display More

What are you looking at when you see this must be cccam about the clock speed,and this will be # out im sure port 16001 is usually the cccam port , for oscam if you are not sure of passwords you can use an ftp program and look at the webif part of your oscam.conf to see what it is , this will give you the user password and port for oscam , you will not see entitlments in cccam if you use oscam/cccam server

8mb broadband is more than sufficient to run properly , I have a friend that had this issue with his connection and glitching when other devices go on also , I assume your not maxing out your connection downloading and streaming video on the other devices? ,His issue turned out to be his router not being able to handle requests well enough and his box was wired to it directly and the other devices were wifi just a poor chipset , borrow one and test this out before you buy one if your sure its not the server you are connecting to and it definitely when you put other devices on ,also check your ping times and make sure they are not too high , you would be hard pushed to use more than 500mb of data in month even with a lot of channel hoppingbeer10

Steve

Dlink routers now sold also just the boxee box left

Quote from jimmyxavi

Hi,

I've got a Nline for my TM-5402, what is the average bandwidth used by this? I'm on 8MB broadband but have found that when i'm on the laptop I get loads of glitches, yet when I'm not using anything it runs perfect. I'm using Ethernet to the TM. Cheers

Please take a look at the rules and post your introduction post under the chatbox :taxman:

Im starting to change my mind about a duo2 now always felt the screen was a gimik more than useful pitty the solo2 just doesn't have the extra ram although doesnt seem to need it

Quote from pheonix

first of all the LCD uses a third party plugin rather that being driven by drivers, it also uses 10% of the available processing power every ten seconds

How can it possibly use % every 10 seconds , why every 10 seconds is it getting ecm picons cant see that being true spiking every 10 seconds to display surely it will have a consistant cpu draw and a possible spike on picon change :waaaht:

Netgear range extender now sold

Quote from jimmmmm

Presumed it would be ok as it was the sponsor's forum. If anyone wants this link in future feel free to PM me

<4> DO NOT post links to other forums or boards or attempt to redirect members to any other Satellite related site.