Posts by maggiesat

I am so surprised that nobody has been willing to offer an answer!.

Okay, so far no dice, I have downloaded VLC media player on my DVB as a plugin, but how to use it ?. It just will not play .ts files downloaded from satellite channels, anyone know what to try please?.

I wonder if I may ask a further related question at the risk of making myself a nuisance. I there a reason why the newly acquired ERT channels cannot be viewed via the media player VLC in line with the other channels that I commonly use on HellasSat 3/4, is there a setting on the player that needs adjusting?. I usually download the channel content and then open it for viewing with VLC.

Thank you.

That is good to know, thank you so just leave it alone!.

Thank you all very much again. I wonder do I need to secure Webinterface in any way much the same way say Webif is password protected?. If so how to do it?.

Hi, guys a quick message to all those who kindly kept the faith and furnished me with endless instruction. I have now successfully set up the oscam-EMU and softCam so that the ERT channels are all available to view and all work very well.

A VERY big thank you for putting up with a complete novice, I am very grateful indeed.

If I may please could you say if any of this installation will need re-installing in the event of an image upgrade, I am currently on OpenAtv 7.5.1 which is very good.

Also is there anything that I can learn from the OSCam Webinterface?.

Thank you all again

Quote from master G

Quote from maggiesat

how to start the softcam manager in Openatv

Activate/control Softcams

Red > Softcam setup

or

Menu > Setup > Decryption and Parental control > Softcam Setup

Note: The above menu may not show until the receiver is restarted following installation of a softcam. This is because the menu checks for a softcam before it becomes visible.

Quote from maggiesat

so what do I do next what do I need to change and how ?.

Download the oscam.dvbapi with Filezilla. Use Notepad++ to edit this file while on your computer.

Insert the following data into oscam.dvabpi, save then send back to the receiver. Restart OSCam-EMU.

OSCam-EMU config files can also be modified through the webinterface, under Files tab.

Code

### ERT 39.0°D ###
A: ::0001:0100 2600:000000:1FFF #ERT 2 HD
A: ::0002:0101 2600:000000:1FFF #ERT 3 HD
A: ::0003:0102 2600:000000:1FFF #ERT 1.
A: ::000A:0104 2600:000000:1FFF #ERT 1
A: ::0014:0100 2600:000000:1FFF #ERT 2
A: ::0023:010A 2600:000000:1FFF #ERT 3
A: ::0028:0102 2600:000000:1FFF #ERT 1 HD


### Digea 39.0°D ###
A: ::044C:1BC6 2600:000000:1FFF ;ALFA HD
A: ::0514:1BDA 2600:000000:1FFF ;ANT1 HD
A: ::0578:1BE4 2600:000000:1FFF ;HD ÖTESİNDE AÇIK
A: ::04B0:1BD0 2600:000000:1FFF ;SKAI HD
A: ::05DC:1BEE 2600:000000:1FFF ;YILDIZ HD
A: ::0640:1BF8 2600:000000:1FFF ;MEGA HD
A: ::06A4:1C02 2600:000000:1FFF ;m.TV HD

Display More

Go to the oscam webinterface and check the Live log while viewing some channels to see if there are any error messages.

To access the webinterface type the ip address of the Anadol Eco V2 into a web browser, press Enter, then look for oscam webinfo link on the left side.

Display More

Thank you for this additional information, it is quite overwhelming to digest, so I am learning as I go along, very much appreciated.

I have amended the oscam.dvbapi folder as suggested and happy with this. I am however completely at a loss as to the Activation process I do not see any of the information you depict in your post above so not sure what is going on, as to oscam webinterface no idea what that is.

I don't understand why I don't see the panels above, what is going on?.

Quote from master G

Quote from maggiesat

how to start the softcam manager in Openatv

Activate/control Softcams

Red > Softcam setup

or

Menu > Setup > Decryption and Parental control > Softcam Setup

Note: The above menu may not show until the receiver is restarted following installation of a softcam. This is because the menu checks for a softcam before it becomes visible.

Quote from maggiesat

so what do I do next what do I need to change and how ?.

Download the oscam.dvbapi with Filezilla. Use Notepad++ to edit this file while on your computer.

Insert the following data into oscam.dvabpi, save then send back to the receiver. Restart OSCam-EMU.

OSCam-EMU config files can also be modified through the webinterface, under Files tab.

Code

### ERT 39.0°D ###
A: ::0001:0100 2600:000000:1FFF #ERT 2 HD
A: ::0002:0101 2600:000000:1FFF #ERT 3 HD
A: ::0003:0102 2600:000000:1FFF #ERT 1.
A: ::000A:0104 2600:000000:1FFF #ERT 1
A: ::0014:0100 2600:000000:1FFF #ERT 2
A: ::0023:010A 2600:000000:1FFF #ERT 3
A: ::0028:0102 2600:000000:1FFF #ERT 1 HD


### Digea 39.0°D ###
A: ::044C:1BC6 2600:000000:1FFF ;ALFA HD
A: ::0514:1BDA 2600:000000:1FFF ;ANT1 HD
A: ::0578:1BE4 2600:000000:1FFF ;HD ÖTESİNDE AÇIK
A: ::04B0:1BD0 2600:000000:1FFF ;SKAI HD
A: ::05DC:1BEE 2600:000000:1FFF ;YILDIZ HD
A: ::0640:1BF8 2600:000000:1FFF ;MEGA HD
A: ::06A4:1C02 2600:000000:1FFF ;m.TV HD

Display More

Go to the oscam webinterface and check the Live log while viewing some channels to see if there are any error messages.

To access the webinterface type the ip address of the Anadol Eco V2 into a web browser, press Enter, then look for oscam webinfo link on the left side.

Display More

I

Any ideas please, I am at a loss to proceed, any help with this will be greatly appreciated, I need to understand what I am doing wrong. Some of the advice above is confusing as I am a complete novice at this, please help.

Thank you.

So, I have installed the Oscam-EMU software and shows up in the pluggins under softcams. I can access the box's folders and can see the oscam.dvbapi file in the /etc/tuxbox/config folder, and also in this folder there is the Softcam.Keys file, so what do I do next what do I need to change and how ?.

Also please couls you explain how to start the softcam manager in Openatv, I don't appear to have this?.

Quote from master G

Quote from maggiesat

any ideas please?

Article

Create password for FTP: OE-A images

How to create a Password for on Enigma2 Receivers. Image teams part of the OE-Alliance branch require a password for FTP.

abu baniaz

Mar 11th 2020

Thank you once again, for the most valuable information. I am now able to access the box via Filezilla and once connected I can find the directory /etc/tuxbox/config, and within that /oscam.dvbapi, however I don't know how to edit this file with the additional key details from there so please explain how to do it and exactly what to edit (add) to the /oscam.dvbapi file.

Thank you

Quote from master G

Latest OSCam-EMU is attached.

Article

How to install an ipk on any enigma2 receiver

This guide is intended to show how to install a plugin, softcam, skin or extension that comes packed as an ipk file on your enigma2 receiver.

master G

Jan 7th 2019

OSCam-EMU config files are in /etc/tuxbox/config. Use an FTP tool like Filezilla to edit these files.

Softcam.key file is also attached with the keys already added. Send it to the same folder as the OSCam-EMU config files.

Edit oscam.dvbapi file with the changes montilla suggested above.

Code

### ERT 39.0°D ###
A: ::0001:0100 2600:000000:1FFF #ERT 2 HD
A: ::0002:0101 2600:000000:1FFF #ERT 3 HD
A: ::0003:0102 2600:000000:1FFF #ERT 1.
A: ::000A:0104 2600:000000:1FFF #ERT 1
A: ::0014:0100 2600:000000:1FFF #ERT 2
A: ::0023:010A 2600:000000:1FFF #ERT 3
A: ::0028:0102 2600:000000:1FFF #ERT 1 HD


### Digea 39.0°D ###
A: ::044C:1BC6 2600:000000:1FFF ;ALFA HD
A: ::0514:1BDA 2600:000000:1FFF ;ANT1 HD
A: ::0578:1BE4 2600:000000:1FFF ;HD ÖTESİNDE AÇIK
A: ::04B0:1BD0 2600:000000:1FFF ;SKAI HD
A: ::05DC:1BEE 2600:000000:1FFF ;YILDIZ HD
A: ::0640:1BF8 2600:000000:1FFF ;MEGA HD
A: ::06A4:1C02 2600:000000:1FFF ;m.TV HD

Display More

Start OSCam-EMU from the softcam manager within the image menu.

Display More

Hi and thank you for the valuable information. So far I have managed to install the OSCAM-EMU software on my box, and I can see the directory /etc/tuxbox/config, however I am unable to access the box using Filezilla as the FTP as it will not accept the box's username/password combination it comes up with an error, cannot change directory /dev/null... critical error. any ideas please?

Hi, and thank you for the replies. Please forgive my ignorance, however I am not familiar with OSCAM-EMU...., presumably is a piece of software, if so is it available to download and install on the DVB as such and if so from a reputable source and how to install?

Also please note that these channels are transmitted as ' below the horizon' non subscription channels!.

Hello, I am new to this forum, hoping for some guidance, so please forgive my questions.

I have a simple set up consisting of an Anadol Eco V2 4K UHD box looking at the HellasSat 3/4 satellite at 39 E.

My question is that although I receive all the ERT channels some do not open for viewing, just a blank screen, I am assuming these are encrypted and according to the information on Lyngsat this is the case.

Given this is the case, the channels are listed as 'below the horizon, and non subscribable' is there anyway these can be viewed?