Posts by piterfree
-
-
uno4k se....???
uno4k.....???
Attention there are 2 models
if you are sure that the model matches inside the folder it is a nofire file
if you do not want to keep the button pressed you have to edit the file in force.
-
-
-
not booting on multiboot while clean openpli 9.xstar boots just fine.
completely useless just like its author copy paster piterfree.!
I don't copy and paste but I use the soft and I add what is possible that works best on the 920,
but for the less experienced who do not know how to update this excellent DM 920,
and if the author of the soft does not provide multiboot it is not my fault so report this to the author...thanks.
-
I think you'll have to take it to a TV technician who has devices that find out if certain frequencies between vertical and horizontal work... you could have damaged some transistors,
if another decoder works on the same system...??
-
disable =1
you just have to add this parameter in the position where I put it in the previous post,
the other quotes in red are the IDs that you have on the player (protocol = newcamd) that give the problem.
-
you don't need active emu...i think that's the problem.
[reader]
label = emulator
disable =1
protocol = emu
device = emulator
disablecrccws_only_for = 0E00:000000
caid = 0500,0604,0E00,1010,1801,1802,2600,2602,2610
detect = cd
ident = 1802:000000,0500:000000,007400,007800,021110,023800;0604:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000
-
exactly...it's the player that runs for the streamreay to work,
-
there is still the problem with the plugin...oa-weather,
you can't change the city...uninstalled it replaced with the version (3.4) and now it's perfect.
-
Hi, where did you download this file?
egami-10.6-r11-vusolo4k-20250523_usb
-
I tried this but still got this:-
your receiver has a software problem detected
Now I give up with the original image version 11
it's an example..this is the VuSolo 4k
check the files if the kernel is this size...see photo.
-
kernel problem,
take this test
kernel.bin...(atv,7.6)+Egami.r11 ok
++++++++++++
I started with Openpli from plugin I download only Fullbackup,
I take the file or soft of Egami r11 on the PC I extract all the files in the folder folder name eg: vuplus and exchange the kernel of the Atv 7.6 soft much smaller,
then I put in the usb and from Openpli with Fullbackup I load the soft and on my decoder it worked,
NB: I think that the original kernel is very large and that the decoder cannot absorb it or completely write it...??.
-
I noticed that it was based on
ATV..it nurtured various parts of the menu and the skin, then the kernel...to change soft with Fullbackup I put kernel of Atv and reload it without problems..good job congratulations.
Yesterday while testing I updated wia web and it got stuck on red...I recommend not updating.
just tested I had on my favorite Pli Python 3.13.3 and I reloaded via web the internal file of the folder...rootfs.tar...and I have to confirm that the Dm started correctly...good work...thanks.
-
I'll repeat the change in the first post
-
-
hello everyone,
having installed the multiboot I installed R11 soft from scratch...it reset everything and I found the old Openpli soft...very strange...I checked the files from the soft downloaded in the decoder in hdd and esting them in the PC I note that the 2 files one kernel is 5.kb...is it normal...???
then I checked R9 and the same kernel file is much larger than 23.kb and I did the test by adding it to the R11 file and by magic it installed the soft,
to do this I sent 8 different soft to 920 yesterday afternoon to understand what was not working on 920 that could not install Egami R11.
NB: now I lost all multiboot and had to format from PC 1T hdd.
Screenshot_2025-05-25-10-53-06-695_com.whatsapp~3.jpg
Screenshot_2025-05-25-10-53-13-523_com.whatsapp~3.jpg
Screenshot_2025-05-25-10-53-47-441_com.whatsapp~2.jpg
Screenshot_2025-05-25-10-52-52-884_com.whatsapp~2.jpg
obviously those who have already installed Egami R10 and update do not encounter the problem because it only reloads the soft (rootfs.tar)
-
Display More
hi,
are you using Egami in multiboot on DM 920...???
I did it once but how do I install other software like Pli or others multiboot is no longer there can you tell me how you do it...??
The answer EgamiBoot is a plugin by Egami
OK...100x100..👍👍👍☕☕☕☕☕☕☕☕
Screenshot_2025-05-23-20-02-28-620_com.whatsapp~2.jpg
Screenshot_2025-05-23-20-02-21-429_com.whatsapp~2.jpg
Screenshot_2025-05-23-20-02-10-644_com.whatsapp~2.jpg
thanks 1000 succeeded
-
Display MoreDisplay More
Please check this in the next update
I have zgemma h9twin
and this page-the inside one- is ok
but the blank page is at start up
like this
hi it has been updated in the next version
hi,
are you using Egami in multiboot on DM 920...???
I did it once but how do I install other software like Pli or others multiboot is no longer there can you tell me how you do it...??
-
DNS...??
it often happens if you use ipk of other soft that do not work....!!
I sometimes install them manually...I extract the files in a folder on the PC with sevenzip...all the files and then send them with Dcc in the soft and give the rights 755 to all the files and in many cases it worked,
but remember to make a backup before doing what I wrote..it could go into constant reboot in many cases.
