I'm currently using this one and I have no problems.

11847

Screenshot_20241110-104959~2.png

I was looking for it for Zetagemma but I see that they don't use it on Openpli.

hello,
I have to confirm that with OpenPli streamrelay works
but with DM 920 and soft openPLi-Py3-homebuild-dm920 by Satpong

Quote from cosy

Quote from piterfree

hi...do you know this oscam...??...nice graphics.

The oscams fro DEB look like this

it is a German board

BUT this question doesn't belong to this thread, you may need to open your own topic

hi,
yes you are right...but it was just to let Sodex know...that we know each other from the forum....DE.

sorry if it's off topic..!!!

Quote from sodex

Doesn't your oscam.log look like #988 in the spoiler oscam.log?

show your oscam.log

hi...do you know this oscam...??...nice graphics.

Screenshot_20241109-133417~3.png

another problem detected,
I tried to do the backup from its menu and the result there are some files but it is missing after 7 minutes...the rootfs.tar file...does not exist.

I am writing here to point out to those who give support on ATV, I have installed various soft on various decoders and I find the same problem,
now I am updating VuPlus ONLY 4k

the start of the emu restart or restart or save sometimes the restart remains active continuously and to solve it you have to turn off the decoder,

another problem encountered if you want to install a plugin the green button works but you have no result the video remains black without any installation.

I hope that a member of Atv takes charge of reading.

I already have 11847 on my 920...I also installed it on H7s and VuSolo4k.

IMG_20241106_190929.jpg

IMG_20241106_190818.jpg

IMG_20241106_190854.jpg

but my favorite is 11828_samur

I've had these for a while now and they work very well.

IMG_20241106_193643.jpg

IMG_20241106_193705.jpg

oscam-emu_11845_samur ok 100x100

IMG_20241107_104108.jpg

IMG_20241107_103931~2.jpg

IMG_20241107_104022.jpg

hi, yes I knew it but I have friends who want backups and so I realized that to satisfy them I have to do sonf in flesch and to friends or on the forums who upload a backup everyone does not use what you stated, but I have to give a software that works immediately without them having problems, so I warned if any user of the form uploads my backups they must know how to solve it.

up until openpli 8.3 I simply loaded backups with BackuSuite...now with the change of ssl and python..they are no longer useful for anything and via web if the kernel is not included the backup will never restart.

hi everyone, today I discovered a new problem among the various backups, if there is no kernel that is part of its soft you will have the problem of the Rosdo LED flashing continuously without booting the soft... now I'll give you some info about it... if you happen to get around the problem just look for the Original DM soft that I have had for some time it is installed by only doing the first config... language and 1 tradponder of your choice... for example I have Rai 10992-v+27500 by heart and then put the soft in service-mode and send the soft that you like... today I tested it successfully.

BACKUP_OpenPli-8xstar-dm920_piterfree

Open ssl versione 1.1.1n

Python 3.9.9

4 Lnb NGsetting 13e+19e+9e+5w

Skin

• MadMax

plugin

• AddOnJaphar
• DreamExplorer
• IPTVPlayer...ok..xxx...no pass
• JediMakerXtream
• LinuxsatPanel
• NGsetting 1.5
• OAWeather
• XStreamity
• MountManager
• ServiceApp

• softcam.CCcam2.3.2
• softcam.mgcamd135a
• softcam.oscam
• softcam.oscam-emu
• softcam.oscam-11845-802.armv7ve-libusb_Samur

hi,

thanks...I had already saved it from the previous software,
I always save all the folders of the software for any problems.

found something else to add Samur's oscam for Tvsat the library is missing and today I managed to figure out which one,

OE2.0: ( opkg update && opkg install libusb-1.0-0 ).....worked
after rebooting with this the oscam that it did not detect as active worked for me.

hello,

I wanted to give some info
in the latest soft the plugin to help install the ipk is missing

SoftwareManager plugin

and if it is possible to add recovery mode,
thanks.

ok thank you for the reply I didn't know the reason and now I know thanks.

there would be another tweak if it were possible, on the satellite dish signal settings there is no possibility of having the SNR+++++ 75 and AGC position... this does not recognize, with the usual bar that gives the percentage, on many decoders there is the same Skin I use my favorite MadMax and on Zetagemma VuSolo4k I have the info on the tuner positions on the DM 920 they are not there and if it is not possible to know the reason.

.....

IMG_20241030_235543.jpg

IMG_20241030_235623.jpg

IMG_20241030_235659.jpg

IMG_20241030_235417.jpg

hi, hecha71, on the latest software I installed it tonight to test it and I found that there are problems with the wifi network... and I had to uninstall the wireless driver to no longer have the problem. The Lan conflicts every time I restart the box,

IMG_20241030_151905.jpg

you see it uninstalled but it still sees the usb wifi and there should be a red x and it is still active.

new...linusat panel

thanks it works perfectly with OpenPli Py3.12.7

Quote from ddinc

Is there an image from the same source for Dreambox820?

I am using the 920 version already.

Hi, I don't think the developpen is satpong, you should ask him the question and if he has the decoder in question.

Quote from hamilton

xc multi.jpg

this is the extension that makes me load in

usr/lib/enigma2/pyton/plugins/extension

I don't know what it's for and what to do with it...XC-multi