DM.920.backup via web DremElite 7.2.piterfree.tar
4_Lnb 13e+19e+9e+5w vhannibal
con oscam samur
+smargo
Ci+Plus ok 100x100 CamNera+CardNera
JediMakerXtream
XStreamity
NcamInfo
OscamStatus
vhannibal autosetting
Posts by piterfree
-
-
-
Hello, in the egami 10.6 image, the egami multiboot plugin has been removed, please add it.
Iit's not possible and was removed
these are the plugins that are there and also the ones that I installed and the one that was cooked is not there multiboot.
-
2 test
Screenshot_20241122-220243~3.png
the ones I marked in red are the tuners for the C you have to select one at a time to test which one works for you.
-
-
-
ok,...I can't test I have H7s and I should go to Switzerland to test, if you have some time at your risk the box could block, go with the other software that works for you....that has the correct Drivers....save the lib/ folder of the soft inside there are the Drivers for sat and c (be careful this should not be done) but I always take risks with my boxes I have several, inside that folder if you search there is one with the name driver it should be replaced with that and restart the box but from the power if you are lucky it works if not you will have to restore everything...Attention it is only for experts.
-
hi, I don't use the C= via Cable that is working near me (Switzerland) but once you have set the C voice you should know which channel or transponder you would like to have and do the personalized search it is just a test to have proof that you have the source, then certain tuners behind the box there is a little button to activate DTT that increases the voltage to 5v.... try.
-
there is one thing that... tuner C is for cable... and if they are encoded channels....?? and if they are in Free on DTT you have to deactivate emu (oscam) try, for example I have the Ci+Plus for Tvsat with the Cam+card... if I leave oscam active I have no vision if instead I deactivate oscam the Ci+Plus works perfectly, you can't have 2 things at the same time.
-
Hi, I have to give some advice to those who install Egami (very nice) on how to start the software and configure the satellites and DTTs, you can't set the manual scan, with other softs it works if you do it right, with Egami yes and ' forced to set Sat and Dtt and then restart the box and then you can do personalized tuning.... it has had this defect for a long time.
I have another suggestion for those who use Egami. I have H7 and tested yesterday the bin of oscam samur is not functional, the one of the feed replaced it with one that works. I have the files that go in tuxbox/config fixed without changing them and replacing the bin the one I have enables immediately, the one of the feed is not enabled to save in the HTTP protocol:.
-
OpenPLi Release by OpenPLi Team, September 2024
- Python 3.9.9
- GStreamer 1.20.5
- FFMpeg 5.1.2 and Exteplayer3, ServiceApp (Dash Support, iCam via StreamRelay)
- EPGImport Built-in
- AC3+/DDP/EAC3 support
- Feeds online (For Wifi/DVB-T Dongles)
- DVB-T USB, Trial Tuner, from JAM (Hauppauge, A867, etc)
- Wifi Realtek, Ralink, Mediatek Supported
- CI+ and IPTV Support Built-in
1300 Free To Air FREE IPTV Channels from their broadcaster
100+ VoD Free To Air Public Domain Movies and more coming soon (Charlot, Keaton, etc)
-
backup in my post
please I beg you for those who downloaded the backup to delete my test iptv that I noticed that the software has restored folders that I had not implemented, I warn you that it is a hateful thing if you are not careful in sending the software and doing the whole manual procedure ... automatically if you let the installation be done by the soft it automatically reinstalls previous soft ... a hateful thing they should eliminate this procedure (hateful), thank you.
-
DM920...ok
Screenshot_20241115-172838~2.png
Screenshot_20241115-172831~2.png
Screenshot_20241115-172818~2.png
emu tivusat
Nonsolosat-25-dm920_via web_piterfree
DM_920
via web the file in the zip...backup.tar
VHannibal plugin ok setting motor
ciplus ok CamNera+Scheda Nera 1856
-
Display More
BOX - ARM
IMAGE - OPENPLI DEVELOP
enigma2-plugin-extensions-multi-stalkerpro_1.2+git169+1f4c695-r0_all.ipk
python3-rarfile_4.1-r0_armv7ahf-neon.ipk
python3-fuzzywuzzy_0.18.0-r0_armv7ahf-neon.ipk
python3-levenshtein_0.12.0-r0_armv7ahf-neon.ipk
I already had the files but on this Solo 4k it doesn't work.
-
ciao, i tested multistalker...i can't find an ipk for this software that works...!!
VuPlus Solo 4k
-
-
I tried a cobraliberosat image for qviart dual the other day which is also based on openpli 9 and as with findings the linuxsat ipk would not work either. I have another test image to try today if i get the time.
ok....!!! linuxsat...telnet
opkg update
py3
opkg install python3-requests (ok 100x100)
py2
opkg install python-requests
-
started testing this software this morning with very negative results
Python.3.9.9
Ngsettin ipk does not work
Linuxsat ipk does not work
IPTVPlayer ipk or via telnet does not work
what can I say it gets worse instead of better...!!!!the only most essential things for a good decoder and I can't believe it.
there are also problems with the Lan settings if I want to change personal IP numbers and save with the green button when I restart the box the Lan network no longer works.
vhannibal-autosetting-ngsetting_1.5 works
-
DM 920 and soft openPLi-Py3-homebuild-dm920 by Satpong
It's been working very well for a few months now, see the Samur 11828 oscam model...but you also need a good supplier (not free with plugin).
-
you also have to enable serviceapp obviously it doesn't work for you
ecm info
