Hi, I too found the problem if you have a VPN it will never work again and I was unable to deactivate the VPN and I had to reinstall the original software... be careful with VPNs once they are installed with the IPTV,
I couldn't even uninstall plugins or update (opk..upd..)
What errors have been corrected in this update from 25/6??
I just want it to stop turning itself off
hi, it turns off if the temperature is high, I glued a heatsink on top of the processor and once it stopped turning off at 85 degrees it went to 64, I haven't turned it off for a year and it works perfectly.
Hello, i am on ultimo4k openatv 7.4 last update ok. So when I export for example the French channels in my favourite and i go in this favourite the channels are not working ?!? Someone knows what is the problem ? Thanks for the help Cordially GD
(ServiceApp)
posso sapere dove trovare l'oscam aggiornata per l'emm 183e?
grazie.
ma con tutti sti post da leggere...io li ho letti quasi tutti...ma se non leggi la prima pagina non saprai mai che devi fare...le sole domande non servono,
but with all these posts to read... I've read almost all of them... but if you don't read the first page you'll never know what you have to do... just asking questions is useless,
nessuno e' Veggente...
1* che decoder si usa
2* che immagine
3* SSL..e' importante per abilitare la Oscam alla compatibilita'.
Hi, if you don't read at least the first few lines you won't know what it means or what you should do, obviously only the bin needs to be changed... but to know what's in your soft...... we are not seers... .so
2) To see which OpenSSL Version in your box:
Code
$ ls -l /usr/lib/libss*.*Or simply use:
Code
$ openssl versiononce you know that SSL has your soft you can choose one of those zips with a file inside that you will have to rename like the one of the Oscam that you are already using and restart the box and if it doesn't work try another one.... once everything is done you will have to find a pastebin to place in the Oscam-server configuration.
Hi, I tested ATV 7.4.1 today and I notice that the Ci+plus doesn't work and if you use Oscam it doesn't work immediately and you have to restart the box to run everything, it seems to me that it's getting worse on the DM 920.
I know that it's about language and I didn't know where to give information about this problem. I made this intervention so that it reaches those who can give my information.
with OpenPli DM_920 example with the 183E Card reader and the Black CAM I can change the channel from Rai 4k which reads my Golden Card with the reader then I switch to the MyZen 4k channel and it reads the Ci+plus Cam without freezing or making any defects
with ATV_920 this doesn't happen as you change the channel always on coded no more transponder it seems that PA pac is not correct and blocks the channels and to go back to using the free channels too I have to restart the box, or you don't have to use the Ci+plus...the ATV v.3 was better.
hi, if the configurations are right....you just have to extract the card, pass it over the gins...rub it to eliminate static electricity and reinsert it then leave it on the Rai Premium HD channel and restart the decoder...after 2 minutes if it doesn't work zap on the encoded channels...(stimulate the Oscam to look for the update).
exactly...I had already read it, now Ci+plus Cams have this restriction and do not allow you to record from the Cam support, it is you who manages the block.
hi, you will need a Fracarro 287339 UX-QD LTE LNB Quad With 4 Universal Outputs LTE Filter...to be able to use recordings...1 Lnb can only use one frequency, as if you have 2 cars and want to be the only one driver.
Ok
with this device I could hear the remote control continuously sending inputs to the decoder but as if they were multiple buttons...now it seems to be perfect...it no longer sends inputs.
Done and reset to default now works fine...Thanks.
if I can I'll give you a little help...!!!, to record on 2 different satellites it works you must have LNB 2 or 4 and the 2 cables connected to the two respective cables to the two tuners of the decoder only in this way it works and if you have DTT it just tested with OpenPli I record on satellite and then I go to watch the same program on DTT or I watch another channel and with the Player checked and it works at 100x100.
hi, I also have the same problem, I opened it and re-soldered the pins of the cip... but it worked for about 20 minutes and then the same defect occurred again. I have a device that signals me when a remote control sends an impulse and I noticed how if 2 buttons were pressed at the same time and to make it work I have to disconnect the batteries for 2 minutes and then it works correctly by putting the batteries back in for 5 minutes then it stops again... it's an H9combo and with OpenPli 8.3... today I check from the web and do know.
the Dm 800 Ferrari was without cooling and never had any problems for several years I just changed the SIM to give it a little touch up to be able to put another soft tri (Japhar SIM) one of the longest-lasting decoders still working.
try like this
you forgot these 2
ecmwhitelist = 91
ecmheaderwhitelist = 80308ED387,81308ED387
nagra_read = 2
mhz = 357
cardmhz = 357
ident = 183E:005411
group = 1
emmcache = 0,3,2,0
auprovid = 005411
localcards = 183E
if on the lines...put a #..hash in front otherwise the filters will confuse the oscam.
good evening everyone, which version of oscam for Gigablue ue 4k????
hi, if you read...you should know....in the first pages it says that the bin works on the SSL and the Arm or Mips processor, yours will certainly be Arm and if you're halfway through the solution but you'll have to Read that there is how to know through commands in Telnet to know what SSL your Gigablu has.
perfect backup
