Posts by piterfree

hi, do a test now that you open the box, disconnect one of the 2 tuners...since you have 2, disconnect all the tuners and practically remove them...then turn on the decoder it will give you a normal error, see if you can send an original ATV soft or other as long as it is original, then turn off the decoder and put one of the tuners back on and turn the decoder back on and check if at least one works if it's fine... the reason could be the power supply.

update

root

piterfree

softcam.oscam_samur_AU_via web

softcam.oscam-emu_samur_AU_via web

tvaddon V.2.14

tvManager V.2.1

CI+Plus test ok 10x100

IMG_20240226_213706~4.jpg

hi everyone, I have a 920 and I notice the decoder blocking with various softs, if you use both emu cilinee and Ci+plus if you start the decoder it works very well then how do you do a couple of zapping on the channels or the decoder blocks or you are forced to disable the emu, if instead you use Ci+plus and Oscam with Reader TvSat it works without problems, it is possible that only the soft DM_920_OpenPLI-2022-04-02-develop works perfectly with everything active and when zapping it's perfect, I hope it's something manageable for all the software that can work, the thing that amazes me is that even on the VuSolo 4k and all the Openpli and ATVs and other images it does the same thing... or you use the Cam with card or do you use the separate oscam with the Cilinee..???.

NB: if they are out of order, trash them ok.

test...ok..

openpli-9.0-release-dm8000-20240219.zip

test...ok

perfect....openpli-8.3-release-dm8000-20240225.zip

Quote from toysoft

Homebuild for DM8000HD with Original Sim (A2P/A8P), OpenPLi 9 Homebuild (2024.02.10)

Link : https://mega.nz/file/KbhXDYKL#…6qyWKetCuAi3G191ZLyOCUUkQ

TS

OpenPLi 9 Homebuild (2024.02.10)
1...has no feed
2...when you go to the menu/information the decoder resets to green screen

Ok.

now I put the openpli-9.0-release-dm8000-20231120

installed anyway but even if you install the settin the channels don't work.. the Tuner is not enabled for the Japhar package.

hi, to use the Japhar you must also have the Sim and it doesn't work without it... if you have the Sim 84 you won't find the Tuner drivers.

ok...openpli-7.3-release-dm8000-20230301_Japhar...ok..Tuner

test...japhar

IMG-20240225-162849 (1).jpg

1* Check this decoder startup on the faceplate first

1.jpg  2.jpg

3.jpg

It's a toy, it has the same functions as the Dream 800 and 800se, except that the 800se has mini USB, whereas the Dream 8000 has the Com serial, which is easier if you have an old desktop PC.

Quote from monassat

Thanks for your suggestion & comments

Annex pics of connection result via Dreamup and also to find IP to connect torugh PC

One time I got the IP address but connection was failed

Tryed also to ping with new IP and also with the regular IP assigned into pas. nothing

user network...ok...??

it doesn't start because you don't check Network, the local network is not active so you will never succeed.

hi...where do you see the rs232...???

IMG_20240224_193212~2.jpg

if instead you have an Original try sending SSL 84...maybe it will work.

ssl.84D Clone

hi, maybe you don't read... be careful it's soft for Clone you have to send via serial SSL 84D and you will see that afterwards you will have the Tuner, if instead you have an Original decoder with Sim 84 you will be sent a soft that is not suitable for your decoder.

Unix starttime: 1708036662

Starttime: 15.02.2024 23:37:42

Version: ncam-6.9

Revision: r4

Build: 12-02-2024

Compiler: arm-vuplus4k-linux-gnueabihf

Box type: dm920 (generic)

PID: 5088

TempDir: /tmp/.ncam

ConfigDir: /etc/tuxbox/config/

WebifPort: 8888

Perfect 920 OpenPli 8.3

IMG_20240215_235054.jpg

found the defect...the configurations are fine, those of the first post...NCam 1.9-r1 (official) inside there is the folder...tuxbox..the 2 files to replace are...ncam.conf and ncam.user and then it works very well I just put a gate in front of the passes...now it works...with the
bin...arm-vuplus4k-linux-gnueabihf

[webif]

httpport = 8888

httpuser = root

# httppwd = ldteam

# httplocale = en_EN

httphideidleclients = 0

httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

httputf8 = 0

Unix starttime: 27
Starttime: 01.01.1970 01:00:27
Version: ncam-6.9
Review: r4
Build: 12-02-2024
Compiler: arm-vuplus4k-linux-gnueabihf
Box type: dm920 (generic)
PID: 672
TempDir: /tmp/.ncam
ConfigDir: /etc/tuxbox/config/NCam.14.3/
WebifPort: 8888

Test ok 100x100 OpenPli 8.3

Screenshot_20240214-174327~3.png

Screenshot_20240214-174246~2.png

this is the result....ncam-libusb.arm-dreambox

ncam-libusb.arm-dreambox in only the bin name changed to NCam.14.3

log result

1970-01-01 01:00:26 00000000 s >> NCAm << cardserver log switched, version 6.9, revision r4 build 12-02-2024 (arm-dreambox-linux-gnueabihf-libusb)

1970-01-01 01:00:26 00000000 s (main) System name = Linux

1970-01-01 01:00:26 00000000 s (main) Host name = dm920

1970-01-01 01:00:26 00000000 s (main) Release = 3.14-1.17-dm920

1970-01-01 01:00:26 00000000 s (main) Version = #1 SMP Sun Feb 27 13:53:37 UTC 2022

1970-01-01 01:00:26 00000000 s (main) Machine = armv7l

1970-01-01 01:00:26 00000000 s (main) The current system time is smaller than the build date (Feb 12 2024). Waiting up to 0 seconds for time to correct

1970-01-01 01:00:27 00000000 s (main) Waiting was not successful. NCam will be started but is UNSUPPORTED this way. Do not report any errors with this version.

1970-01-01 01:00:27 00000000 s (main) creating pidfile /tmp/NCam.14.3.pid with pid 673

1970-01-01 01:00:27 00000000 s (config) services reloaded: 0 services freed, 15 services loaded, rejected 0

1970-01-01 01:00:27 00000000 s (emu) NCam-Emu version 999

1970-01-01 01:00:27 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled

1970-01-01 01:00:27 00000000 s (main) signal handling initialized

1970-01-01 01:00:27 00000000 s (config) 1399 provid's loaded

1970-01-01 01:00:27 00000000 s (config) 63 service-id's loaded in 1 ms

1970-01-01 01:00:27 00000000 s (net) newcamd: initialized (fd=5, port=127, prio=1 [ SO_PRIORITY IP_TOS ])

1970-01-01 01:00:27 00000000 s (net) -> CAID: 183E PROVID: 000000, 005411

1970-01-01 01:00:27 00000000 s (reader) SRG_SSR [internal] creating thread for device /dev/sci0

1970-01-01 01:00:27 00000000 s (reader) Tivusat_183E [mouse] creating thread for device /dev/ttyUSB0

1970-01-01 01:00:27 00000000 s (reader) emulator [emu] creating thread for device emulator

1970-01-01 01:00:27 00000000 s (emmcache) loaded 11 emmcache records from /etc/tuxbox/config/NCam.14.3/ncam.emmcache in 1 ms

1970-01-01 01:00:27 00000000 s (emmcache) loaded 0 emmstat records from /etc/tuxbox/config/NCam.14.3/ncam.emmstat in 0 ms

1970-01-01 01:00:27 00000000 s (anticasc) anti cascading disabled

1970-01-01 01:00:27 70E71E5B r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)

1970-01-01 01:00:27 36F6EA62 r (reader) SRG_SSR [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=375, cardmhz=375)

1970-01-01 01:00:27 36F6EA62 r (reader) SRG_SSR [internal] Reader sci internal, detected box type: dm920

1970-01-01 01:00:27 2E36A4AC h (webif) webif: decompressed 212446 bytes back into 495888 bytes

1970-01-01 01:00:27 2E36A4AC h (webif) HTTP Server running. ip=0.0.0.0 port=8888

1970-01-01 01:00:27 7A3496AF r (reader) Tivusat_183E [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)

1970-01-01 01:00:28 70E71E5B r (reader) emulator [emu] card detected

1970-01-01 01:00:28 7A3496AF r (reader) Tivusat_183E [mouse] card detected

1970-01-01 01:00:28 36F6EA62 r (reader) SRG_SSR [internal] card detected

1970-01-01 01:00:29 70E71E5B r (reader) emulator [emu] found card system emu

1970-01-01 01:00:29 70E71E5B r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1

1970-01-01 01:00:29 70E71E5B r (emu) Reading key file: /etc/tuxbox/config/NCam.14.3/SoftCam.Key

1970-01-01 01:00:29 70E71E5B r (emu) WARNING: Wrong key format in SoftCam.Key: F 2A94055E 02

1970-01-01 01:00:29 70E71E5B r (emu) Total keys in memory: W:0 V:35 N:9 I:0 S:0 F:283 G:0 P:206 D:0 T:4 A:0

1970-01-01 01:00:29 36F6EA62 r (reader) SRG_SSR [internal] ATR: 3F 77 18 00 00 DA AC 41 14 64 90 00

2024-02-14 14:32:03 7A3496AF r (reader) Tivusat_183E [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 54 49 47 45 52 36 30 31 20 52 65 76 4D 38 37 14

2024-02-14 14:32:03 7A3496AF r (reader) Tivusat_183E [mouse] Tivusat 183D / 183E / 1807 - no keys built in, use config values boxkey + rsakey

2024-02-14 14:32:03 7A3496AF r (reader) Tivusat_183E [mouse] Setting baudrate to 111600 bps

2024-02-14 14:32:04 36F6EA62 r (reader) SRG_SSR [internal] using ecm #902 for long viaccess ecm

2024-02-14 14:32:04 36F6EA62 r (reader) SRG_SSR [internal] type: Viaccess (non-standard atr), caid: 0500, serial: ##########

2024-02-14 14:32:04 7A3496AF r (reader) Tivusat_183E [mouse] detect nagra tiger card

2024-02-14 14:32:04 36F6EA62 r (reader) SRG_SSR [internal] providers: 6 (FFF430,070200,070210,070220,070230,070240)

2024-02-14 14:32:04 36F6EA62 r (reader) SRG_SSR [internal] Maturity level [F]=no age limit

2024-02-14 14:32:04 36F6EA62 r (reader) SRG_SSR [internal] ready for requests

2024-02-14 14:32:04 36F6EA62 r (reader) SRG_SSR [internal] found card system viaccess

2024-02-14 14:32:04 36F6EA62 r (reader) SRG_SSR [viaccess] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1

2024-02-14 14:32:04 36F6EA62 r (reader) SRG_SSR [viaccess] card detected

2024-02-14 14:32:04 36F6EA62 r (reader) SRG_SSR [viaccess] serial: ##########

2024-02-14 14:32:05 36F6EA62 r (reader) SRG_SSR [viaccess] provider: 1, id: ####################, sa: ########, geo: empty

2024-02-14 14:32:05 7A3496AF r (reader) Tivusat_183E [mouse] type: NAGRA, caid: 183E, IRD ID: ############

2024-02-14 14:32:05 7A3496AF r (reader) Tivusat_183E [mouse] ProviderID: 00 00 54 11

2024-02-14 14:32:05 7A3496AF r (reader) Tivusat_183E [mouse] ready for requests

2024-02-14 14:32:05 7A3496AF r (reader) Tivusat_183E [mouse] found card system nagra

2024-02-14 14:32:05 7A3496AF r (reader) Tivusat_183E [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1

2024-02-14 14:32:05 7A3496AF r (reader) Tivusat_183E [nagra] ROM: T I G E R 6 0 1

2024-02-14 14:32:05 7A3496AF r (reader) Tivusat_183E [nagra] REV: R e v M 8 7

2024-02-14 14:32:05 7A3496AF r (reader) Tivusat_183E [nagra] SER: ############

2024-02-14 14:32:05 7A3496AF r (reader) Tivusat_183E [nagra] CAID: 183E

2024-02-14 14:32:05 7A3496AF r (reader) Tivusat_183E [nagra] Prv.ID: 00 00 54 11 (sysid)

2024-02-14 14:32:05 7A3496AF r (reader) Tivusat_183E [nagra] Activation Date : 01/01/2009

2024-02-14 14:32:05 7A3496AF r (reader) Tivusat_183E [nagra] Expiry Date : 01/01/2038

2024-02-14 14:32:05 36F6EA62 r (reader) SRG_SSR [viaccess] provider: 2, id: ####################, sa: ########, geo: FF FF FF FF

2024-02-14 14:32:05 36F6EA62 r (reader) SRG_SSR [viaccess] class: 01, expiry date: 2024/01/11 - 2024/02/25

2024-02-14 14:32:05 36F6EA62 r (reader) SRG_SSR [viaccess] class: 01, expiry date: 2023/09/28 - 2023/11/12

2024-02-14 14:32:05 36F6EA62 r (reader) SRG_SSR [viaccess] class: 01, expiry date: 2023/05/11 - 2023/06/25

2024-02-14 14:32:05 36F6EA62 r (reader) SRG_SSR [viaccess] class: 01, expiry date: 2023/05/04 - 2023/06/04

2024-02-14 14:32:05 36F6EA62 r (reader) SRG_SSR [viaccess] class: 02, expiry date: 2023/05/04 - 2023/06/04

2024-02-14 14:32:05 36F6EA62 r (reader) SRG_SSR [viaccess] class: 03, expiry date: 2023/05/04 - 2023/06/04

2024-02-14 14:32:05 36F6EA62 r (reader) SRG_SSR [viaccess] class: 04, expiry date: 2023/05/04 - 2023/06/04

2024-02-14 14:32:05 36F6EA62 r (reader) SRG_SSR [viaccess] class: 05, expiry date: 2023/05/04 - 2023/06/04

2024-02-14 14:32:05 36F6EA62 r (reader) SRG_SSR [viaccess] provider: 3, id: #######################, sa: ########, geo: FF FF FF FF

2024-02-14 14:32:05 7A3496AF r (reader) Tivusat_183E [nagra] Credit : 0 euro

2024-02-14 14:32:05 36F6EA62 r (reader) SRG_SSR [viaccess] provider: 4, id: #######################, sa: ########, geo: FF FF FF FF

2024-02-14 14:32:06 36F6EA62 r (reader) SRG_SSR [viaccess] provider: 5, id: #######################, sa: ########, geo: FF FF FF FF

2024-02-14 14:32:06 36F6EA62 r (reader) SRG_SSR [viaccess] provider: 6, id: #######################, sa: ########, geo: FF FF FF FF

it ends like this, it no longer has any blocked dialogue as if the reader is on another planet

restarted from web....

2024-02-14 14:40:48 2E36A4AC h (webif) reader emulator disabled by WebIf

2024-02-14 14:40:48 70E71E5B r (emu) Reader is shutting down

2024-02-14 14:40:48 70E71E5B r (emu) Freeing keys in memory: W:0 V:35 N:9 I:0 S:0 F:283 G:0 P:206 D:0 T:4 A:0

2024-02-14 14:41:10 2E36A4AC h (webif) Restart requested by WebIF from 192.xxx.xxx

2024-02-14 14:41:10 2E36A4AC h (main) restart ncam requested

2024-02-14 14:41:15 2E36A4AC h (webif) HTTP Server stopped

2024-02-14 14:41:15 00000000 s (stat) loadbalancer: statistic saved 0 records to /tmp/.ncam/stat in 0 ms

2024-02-14 14:41:15 00000000 s (dvbapi) dvbapi channelcache saved to /etc/tuxbox/config/NCam.14.3/ncam.ccache

2024-02-14 14:41:15 00000000 s (emmcache) saved 11 emmcache records to /etc/tuxbox/config/NCam.14.3/ncam.emmcache in 1 ms

2024-02-14 14:41:15 00000000 s (emmcache) reader emulator skipped since emmcache save is disabled

2024-02-14 14:41:15 00000000 s (emmcache) saved 0 emmstat records to /etc/tuxbox/config/NCam.14.3/ncam.emmstat in 0 ms

2024-02-14 14:41:15 00000000 s (reader) SRG_SSR [viaccess] Killing reader

2024-02-14 14:41:15 00000000 s (reader) Tivusat_183E [nagra] Killing reader

hi tried to install on the Dream 920 with OpenPli 8.3 NCam I have to confirm that it doesn't work I wasted an entire night but it stops with the reading of the cards I have the Nagra 183E on Smargo and the TSI on Reader /0... tried all the files recognizes the Ncam on the web page but then stops reading the cards and has no more dialogue... if I restart from the web Ncam no longer starts, Ncam 14.3 is installed and it works perfectly, tested only the NCam_6.9 bin has been changed -r4...changing many of the files in the zip...result: nothing works....went back to bin 14.3 and everything works perfectly.

Screenshot_20240214-022054~2.pngScreenshot_20240214-022040~3.png

Screenshot_20240214-094431~2.png

tet ok 100x100