Later will post results with Japar loader
see you later
There are 38 replies in this Thread which was already clicked 1,358 times. The last Post () by Hannibal_Lecter.
Later will post results with Japar loader
see you later
what image you try to flash, you sure have ORIGINAL Dreambox 8000?
Turn off antivirus/firewall
DreamUp/JapharFlasher set Bad Sector Recovery and flash again
benutze einen anderen Browser, versuche es mit Firefox Portable 3.5.1
Try to reset the bios settings:
Connect the serial port, use a terminal program as Putty or from windows the Hyperterminal.
When connect and turning on the box, press the S key to go to the Advanced setup (bios) utility.
Or press the front button, turning os the box may also give you the Advanced setup into the Terminal screen.
Goto the Exit tab and choose the Reset all settings to factory default.
This you can also preform with optiflasher.
Display More
Faceplate is exatly as you shown at n.1
test...japhar
all written but he won't read sorry
Here are results with Japhar using com connection
Seams flash loader uploaded completely. then no possibility to go on
Display Morewhat image you try to flash, you sure have ORIGINAL Dreambox 8000?
Turn off antivirus/firewall
DreamUp/JapharFlasher set Bad Sector Recovery and flash again
benutze einen anderen Browser, versuche es mit Firefox Portable 3.5.1
Try to reset the bios settings:
Connect the serial port, use a terminal program as Putty or from windows the Hyperterminal.
When connect and turning on the box, press the S key to go to the Advanced setup (bios) utility.
Or press the front button, turning os the box may also give you the Advanced setup into the Terminal screen.
Goto the Exit tab and choose the Reset all settings to factory default.
This you can also preform with optiflasher.
DM 8000 is original
No antivirus active
Bad sector recovery with Japhar done
connected with putty but no possibility to enter via terminal
will study optiflasher and will revert
thanks
By the way when you said "press the S key" wich one is S key
Until you don't set the Network... you will have troubles, and DM8000HD must be connected via RJ45 to your MODEM/ROUTER... and your PC must be also connected to the MODEM/ROUTER.
TS
hi, to use the Japhar you must also have the Sim and it doesn't work without it... if you have the Sim 84 you won't find the Tuner drivers.
ok...openpli-7.3-release-dm8000-20230301_Japhar...ok..Tuner
hi, to use the Japhar you must also have the Sim and it doesn't work without it... if you have the Sim 84 you won't find the Tuner drivers.
ok...openpli-7.3-release-dm8000-20230301_Japhar...ok..Tuner
Actually have the original sim. I do not know wich one is
installed anyway but even if you install the settin the channels don't work.. the Tuner is not enabled for the Japhar package.
Homebuild for DM8000HD with Original Sim (A2P/A8P), OpenPLi 9 Homebuild (2024.02.10)
Link : https://mega.nz/file/KbhXDYKL#…6qyWKetCuAi3G191ZLyOCUUkQ
TS
Homebuild for DM8000HD with Original Sim (A2P/A8P), OpenPLi 9 Homebuild (2024.02.10)
Link : https://mega.nz/file/KbhXDYKL#…6qyWKetCuAi3G191ZLyOCUUkQ
TS
OpenPLi 9 Homebuild (2024.02.10)
1...has no feed
2...when you go to the menu/information the decoder resets to green screen
Display MoreHomebuild for DM8000HD with Original Sim (A2P/A8P), OpenPLi 9 Homebuild (2024.02.10)
Link : https://mega.nz/file/KbhXDYKL#…6qyWKetCuAi3G191ZLyOCUUkQ
TS
OpenPLi 9 Homebuild (2024.02.10)
1...has no feed
2...when you go to the menu/information the decoder resets to green screen
Yes, that's an Homebuild, normal.
Otherwise he can use the official image, that is for Original box only.
Downloads | OpenPLi - Open Source Set-Top Box Software
TS
test...ok..
openpli-9.0-release-dm8000-20240219.zip
test...ok
perfect....openpli-8.3-release-dm8000-20240225.zip
Today I installed newnigma on my DM-8000 device online and everything is fine.
Just follow the instructions given and be patient.
already written in Post #6 and post #10
Don’t have an account yet? Register yourself now and be a part of our community!