you can't because you don't do soft multiboot
search the web for how to install image for multiboot.I have a curiosity ... what image do you have if Atv or OpenPli ... if you Atv means that you have never been installed I guess on that decoder.
exactly (if I'm not mistaken there are 2 backups, one for multiboot and the other single from usb and from recovery mode you can load it...read on the web how to install image on H7..H9...they work the same way.
done in the traditional way so you also change the loading of the backup
NB: to put the backup
(1)
put last OpenPli image and from plugin download only BackupSuite, at the end
restart the box.
(2)
as you turn on the deco go to plugins press on BackupSuite press ok to go
with blue button Restore backup press ok search where the folder is placed
in USB or HHD and locate the H7 folder and press the green button
start the flesh
it will ask you whether to make the two Standard files ( rootfs.tar.bz2 + kernel.bin).
DM_920_OpenPli_8.3_AU_piterfree
openPLi-8.3-dm920-20220926 the best
old but Great soft...updated AU emme via web
4 Lnb_sat motor NGsetting
softcam.oscam
softcam.oscam-11724-798.armv7ve...(AU.emm) via web
softcam.oscam-cak7
softcam.oscam-emu
softcam.oscam-icam
BackupSuite
Ciplushelper
ClearMem
DreamExplorer
EPGImport
FullBackup
JediMakerXtream
IPTVPlayer
MultiStalker
NetSpeedTest
NGsetting
tvaddon
tvManager
YouTube
MountManager
1000 thanks to samur x (AU.emm) via web
1000 thanks to whoever developed the soft.
and it doesn't ask whether to make the two Standard files ( rootfs.tar.bz2 + kernel.bin). but only unzip ?
do unpack it and maybe he will see it then to install it...???
:Translate:
HI,
if you did the procedure described above by me ... you only messed up the soft and not the kernel
both must be done, otherwise it happens as described,
you will have to reload or via Multiboot
or download soft via the web and then redo the procedure... it never crashes that decoder has seven lives like cats.
:Translate:
Display MoreOpenPli-8.3-py2-dm920-20220926 from satpong
- Python 2.7.18
- GCC 12.2.0
- Glibc 2.36
- OpenSSL 3.0.5
- Busybox 1.35.0
- GStreamer 1.20.3
- FFmpeg 5.1.1
- ServiceApp
- Streamlink
- Multi-Stalker
- YouTube (git1028)
- OpenWebif 1.5.2
- WLAN, CI+, Display skins, LED setup
- blindscan, cablescan, terrestrialscan, fastscan
- feed dm920/plugins/settings/picons
- cccam 2.3.9, oscam, oscam-emu 11714, oscam-icam, oscam-cak7 (port 8888)
- E2 settings 75°E-45°W, BBC-SATBACK 27.5°W, abertis TDT 30.0°W, Streams
HI,
I really have to confirm, soft better for 920
OpenPli dated 26-09-2022
I had to test it again and I am amazed to see all the plugins work optimally,
what in the other more recent soft with the new py3
most of the plugins have no functions or do not develop it is better to bring back the old software, very performing and current...my compliments to the developers and to the support given to this fabulous Dream 920 devoder...thanks for your collaboration.
HI,
I am always with the old version
2022-04-02 Excellent version gives me the possibility of doing everything that I want and fast and important thing all the plugins such as the CAM ci+ and emu manageable at 100x100,
The latest images with Py3 updates ... are just problems ... and none that updates the plugins ... what is it for updating the soft if the smallest plugin Dream-Explorer doesn't work ....? ... useless Test.
This for my experiences is the best functional image to today.
It was what I had tested the
The front skins are not suitable for the front ...
NB: Another problem encountered ... if I add OSCAOM-EMU it doesn't work ... there are no bookcases and even if they install from the feeds I have not positive results (I tried to install Oscam of Samur with bookshop 102 and not function) emu not compatible , 10 hours of useless tests.
(oscam 183E).
nella foto che ai postato ai la tua soluzione c'è leggi attentamente...
le prime due righe...ti da' indicazione del bin che dovrai
cercare nelle Oscam imprima pagina.
nuove imput per Cam Nera..attivati nuovi Prov.
new entries for Cam Nera.. activated new Prov.
DM 800SE_OpenPli-12.2_ssl 84_AU_piterfree
test A8P ok
soft + ssl 84
1* soft
2* ssl 84
vhannibal 2 sat 13+19 dtt
softcam.oscam-emu Tvsat ok thanks samur.... 
via web
DM 800SE_OpenPli-12.2_ssl 84D_AU_piterfree
soft + ssl 84D
1* soft
2* ssl 84D
vhannibal 2 sat 13+19 dtt
softcam.oscam-emu Tvsat ok thanks samur via web
84D...Clone
Display MoreHello Everyone,
I'm having difficulties getting my Tivù SAT Gold card to work using the provided guide. I'm using the Zgemma H9.2H decoder with OpenATV 7.3. While I did install the oscam stable from the softcam plugins, I later replaced it with the ARM version mentioned in this thread (OSCam-11724-798 armv7ve OpenSSL-1.0.2 libusb). After configuring the server files as recommended, I'm only able to access Rai channels 1, 2, and 3.
[reader]
label = Tivusat_183E
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 183E
rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD86B595B366C35716ABC91FA3DC159C9F4D8164B5
emm_url = https://rentry.co/ognzc/raw
emm_reload_minute = 10
detect = cd
mhz = 368
cardmhz = 368
nagra_read = 1
ident = 183E:000000,005411
group = 1
emmcache = 1,1,2,0
saveemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
auprovid = 005411
Would anyone be kind enough to assist me with this issue?
Additionally, I tried configuring using the Remote activation (client side) but am unsure about the correct inputs for 'Host' and 'Port'. I assume 'Host' is my decoder's IP address, but what should I input for 'Port'?
Thank you!
emm_reload_minute = 15
ecmwhitelist = 91
ecmheaderwhitelist = 80308ED387,81308ED387
detect = cd
nagra_read = 2
group = 1
emmcache = 1,2,2,0
auprovid = 005411
ok..... 
DM_800SE_OpenPLi 4.0-AU_ssl 84D_piterfree
vhannibal 2 sat 13+19 dtt
softcam.CCcam 2.3.0
softcam.mgcamd
softcam.oscam-emu Tvsat ok thanks samur via web
softcam.scam360
DM_800_OpenPli 7.2_AU_ssl.84D_piterfree
Clone
vhannibal 2 sat 13+19 dtt
Wiffi ok
softcam.gbox
softcam.oscam
softcam.oscam-emu Tvsat ok thanks samur
emmstat ERROR: count=0 type=0
works as I see the oscam reads the postcard
it's just a postcard update that doesn't start....???
OSCam-11724-798 (aarch64 OpenSSL-3.x.x libusb)..........................................or this
OSCam-11724-798 (arm sf4008_h8.2h_h9.2h OpenSSL-3.x.x libusb).............or this
OSCam-11724-798 (aarch64 OpenSSL-1.0.2 libusb).........or this last
but every time it's better to restart the box....it doesn't always work right away
root@dinobot4kmini:~# opkg print-architecture | grep -iE "arm|aarch64|mips|cortex|sh4|sh_4"
arch cortexa15hf-neon-vfpv4 16
arch static-cortexa15hf-neon-vfpv4 31
arch armv7ahf-vfp-neon 61
arch armv7ahf-neon 61
arch cortexa15hf-neon-vfpv4 61
OSCam-11724-798 (SH4 OpenSSL-1.0.2).,...???
aarch64|mips|cortex|sh4
Oscam .......arch...64....openssl....102
test...??
No...!!
OSCam-11724-798 (armv7ve libusb OpenSSL-3.x.x).zip or OSCam-11724-798 (armv7ve OpenSSL-1.0.2 libusb).zip
