Posts by piterfree

only this one works 100x100.

curtain ... Cam 4k tivusat ... ok
Blue button....new......curtain
Prov...
>183D
>183E
save with green key and exit from all
if you like it it works if you use VuSolo Original, or if it doesn't work you have to change the Cam and buy a TvSat HD
Not 4k...your decoder is not 4k and it may not work.

I have it and it doesn't work on vuplus Solo Clone.

on vuplus Only (not 4k)
if you see the Cam goes in cam settings only override the prov 183E,183D

can't go with other testers due to channel blockage.

HALLO,
für die Tvsat-Karte ... die Sie im Lesegerät haben, siehe Nummer 1856 ... der Betrieb an Oscam ist seit September 2022 nicht möglich, Sie müssen sie mit einer zertifizierten Black Tvsat-Cam oder einem Tvsat-Decoder verwenden.

forgive me...?
found the problem i described...

XCPlugin...on certain decoders like the Drem 920...it updates and no longer works as an iptv list,
JediMakerXtream works perfectly,

I solved it by installing XCPlugin...another model that doesn't update.

okay
you can do it if 84 is the original one

hi,

(no ca found) now you are forced to use mini usb cable and Lan to restore it.

hi,

you have to do exactly the same info hold down the button behind the decoder near the hdmi cable if there is or on the front panel hold down and switch on....
then put the number that appears on the front panel on the PC and as you enter the webinf... you will see the type of ssl that your decoder has.

hi,
the hdmi problem is always the same who uses it usually disconnects and reconnects the hdmi cable when the decoder is on this leads to the ruin of the video card that is in the processor,

then for the soft all the softs that year the SSL 84 which is dedicated to the Sim A8P are fine .... humic inconvenience that to be precise between the Soft and the Sim via Web it must be sent 2 times SSL 84 and finally the Soft .

hi,

ok cccam...it doesn't work....?
what do you need for....?
what should cccam do.....?

it's a meaningless question
do you have a Card or cilin...?

ok... you have to find the SSL 84 it's for the original and you send it to the decoder at least 2 times to make the sim work with the new sift...

it only serves to avilitare the boot with the soft,

I'm sure you had an old ssl not adequate for the new soft.

hi,
test...send a channel list....then check if at least one of the channels works and if it doesn't work you will have to change the tuner drivers...it happens when the SSL (there is clone and original) is not compatible for the Sim that is in the decoder.

hallo,
du musst nichts machen...
Nur wenn Sie zu einem anderen Satelliten wechseln, müssen Sie ein paar Zaps von einem Kanal zum anderen machen, und der Satellit stellt sich selbst wieder her.

(the Germans) if your server has too many customers and you get more than 300 ecm...it doesn't work...
for this reason there are few who manage to make everything work well.