Posts by kennboy

  • oscam 7250

    thanks every1 so which 1 is best to use oscam/cccam with dvapi or oscam/cccam 213 for uk sly ive got both but not sure which to use ive download cccam 213 thanks.

  • oscam 7250

    16 views and no 1 can give me advice thought this is the place to be for help/problems been looking at the wiki before some1 gets on my case about it but carnt get my head around it been looking on the board for configs and help no joy thanks.

  • oscam 7250

    i hope some1 can help me here please ive got db500hd ive tryed lots of oscam but i dont seem to be able to stop frezing and channell stops ive tyrd lots of configs for my white sly uk card. can some1 look at my configs and see where im going wrong im running oscam on its own .hope its ok to post my configs here thay are




    as you can see i dont have many but i just cannot make it stable as ive said ive trayed alsorts off things to make it stable bout with no joy help please.

  • oscam

    right at the moment im running db 500hd nemesis 108 and oscam 7039 by dax.ive been looking on the borad even the configs in this post. my problem is frezzing on my white sly card uk can some1 please look at my files and see what could be the prooblem please


    [global]
    usrfile = /media/hdd/oscam/oscam.log
    logfile = /media/hdd/oscam.log
    clientmaxidle = 300
    nice = -1
    maxlogsize = 1000
    preferlocalcards = 1
    saveinithistory = 1
    lb_mode = 1
    lb_save = 100
    lb_nbest_readers = 1
    lb_use_locking = 0


    [monitor]
    port = 988
    nocrypt = 127.0.0.1,192.168.x.x
    aulow = 60
    hideclient_to = 15
    monlevel = 4
    appendchaninfo = 1


    [cccam]
    port = 12001
    reshare = 1
    version = 2.1.2
    nodeid =
    reshare_mode = 0
    updateinterval = 3000


    [dvbapi]
    enabled = 1
    au = 0
    boxtype = dreambox
    user = xxxxxxx


    [webif]
    httpport = 16002
    httpuser = root
    httppwd = xxxxxx
    httprefresh = 15
    httpallowed = 127.0.0.1,192.168.x.x


    [reader]
    label=slot0
    enable=1
    protocol=internal
    device=/dev/sci0
    boxid=xxxxxxxxx
    detect=cd
    mhz=500
    cardmhz=357
    caid=0963
    ident=0963:000000
    group=1
    emmcache=1,3,2
    #blockemm-bylen =
    blockemm-unknown=1
    blockemm-s=1
    blockemm-u=0
    blockemm-g=1
    loadbalanced=1
    lb_weight=101
    cccmaxhops=1
    cccreshare=1
    services=!my_ignore_list
    ccckeepalive=1
    dropbadcws = 1
    disablecrccrws = 1
    #cacheex = 1


    [account]
    hostname = 127.0.0.1
    user = xxxxxxxx
    pwd = xxxxxxxx
    uniq = 3
    group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18
    au = slot0
    keepalive=1


    these are what im useing ive tryed lb settings at 1000/100/101 just cannot stop the frezzing and when my box is in standby i lose connection need help please thanks

  • oscam

    i want to use oscam on its own i have db500hd nemisis 108 can i use the config files in the last sticky on ere.if so which ones for sly uk oscam on iys own thanks

  • connection problems

    well that as suprised me i did think some1 would have some in put or if some1 is useing a white sly card and its stable can you put your configs up please thanks.

  • connection problems

    ive been looking at post im having problems if i put db500hd nemsis 108 on stanby oscam 6738 seems to stop running. ive got my db on stanby now and oscam as been running online for 52 mins im just seeing how long it will run because i get up in the morning and have to retart db so oscam starts eres my config files can any1 see what can be done please thanks.


    [global]
    usrfile = /etc/log/oscamuser.log
    logfile = /etc/log/oscam.log
    clientmaxidle = 300
    nice = -1
    maxlogsize = 1000
    preferlocalcards = 1
    saveinithistory = 1
    lb_savepath =


    [monitor]
    port = 988
    nocrypt = 127.0.0.1,192.168.xx.xx-192.168.255.255
    aulow = 60
    hideclient_to = 15
    monlevel = 4
    appendchaninfo = 1


    [cccam]
    port = 000000
    reshare = 1
    version = 2.1.2
    nodeid =
    reshare_mode = 1


    [dvbapi]
    enabled = 1
    au = 1
    boxtype = dreambox
    user = xxxxxxx


    [webif]
    httpport = 16002
    httpuser = root
    httppwd = xxxxxxxx
    httprefresh = 15
    httpallowed = 127.0.0.1,192.168.xx.xx-192.168.255.255


    [anticasc]
    enabled = 1
    aclogfile = /oscam_ac.log




    [reader]
    label = slot0
    protocol = internal
    device = /dev/sci0
    services = freesat
    boxid = xx xx xx xx
    detect = cd
    mhz = 500
    cardmhz = 357
    ident = 0963:000000
    group = 1
    #emmcache = 1,3,2
    blockemm-unknown = 1
    blockemm-s = 1
    #blockemm-u = 0
    blockemm-g = 1
    lb_weight = 100




    [account]
    user = xxxxxxx
    pwd = xxxxxx
    uniq = 3
    group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14, 15,16,17
    hostname = 127.0.0.1
    au = slot0
    keepalive = 1


    if any1 can see if there is something that i might have wrong thanks

  • i want to use oscam on its own

    ive been playing with oscam these settings i have no frezzing



    and the web info shows users offline but if i use this



    but if i use this in webinfo users are connected but alot off frezzing how can i inprove it thanks.

  • i want to use oscam on its own

    well im still haveing problems installing gsu when i telnet that command it says cannot unable to down grade because 1.18 installed ive been all thry the files i use flashfxp which ive always use so can you pint me where to look ivbeen in my plugins nothing there but could it be a lib file. oscam webinfo ive seen the log at the bottom but can you clear something up for me when i look st status main page my shaerers looking at it that
    type i suppose me r and the rest have P then there line (label) au me active and the Ps on.in the CAID:SRVID thay all have 0 then it as LB Value/ Reader that says no data and in the status bit whos connected and how many cards thay have. but when i look in users all my shaerers it says offline but im connected. and in the readers it shows me that thay are useing cccam and what vrns number it then shows ECMs OK thay have what im getting i think put me right please then theres ECMs NOK that give me numbers aswell ive tryed to explain it best i can all my channels clear and tells me who im connected to if i go to a sly channel it shows me blue crd so i think its ok like i said explained it best i can its just this gsu ive tryed downloading oscam info then a box comes up but i can only make out it wants oscam config or cannot find it im english but the message is not but cannot read it thanks.

  • i want to use oscam on its own

    well i dont know what im doing wrong but i dont seem to be able to put then in. im puy then in my tmp folder then uesing blue button to install is there a command. thay are nemsis downloads but thay dont install thanks'



    ps oscam seems better now bout i cannot get log file it says none there.

  • i want to use oscam on its own


    so can i do away with this [cccam]
    port = 12000 and just use the cs line would that be better i can now ascces the web page there is afaw faults
    also are you saying delete this mhz = 500
    cardmhz = 357 or just put #at the beging to stop it reading. allso is there a plugin foe db500hd i will post log later when i change things thanks.

  • i want to use oscam on its own

    thanks for your help but i seem to have it working but im getting alot of frezzing plus i have to restart oscam6020 im useing a white sly card these are my configs with help from a friend can it be inproved i cannot access the web page and is there a plugin for db500hd image nemsis 2.4



    [global]
    usrfile = /media/usb/log/oscam/oscamuser.log
    logfile = /media/usb/log/oscam/oscam.log
    cwlogdir = /media/usb/log/oscam/cw
    emmlogdir = /media/usb/log/oscam/emm.log
    clientmaxidle = 300
    nice = -1
    maxlogsize = 1000
    preferlocalcards = 1
    saveinithistory = 1


    [monitor]
    port = 988
    nocrypt = 127.0.0.1,192.168.x.x-192.168.255.255
    aulow = 60
    hideclient_to = 15
    monlevel = 4
    appendchaninfo = 1


    [cs357x]
    port = 12000


    [cccam]
    port = 12000
    reshare = 1
    ignorereshare = 1
    forward_origin_card = 1
    version = 2.2.1
    stealth = 1
    nodeid =
    reshare_mode = 1


    [dvbapi]
    enabled = 1
    au = 1
    boxtype = dreambox
    user = admin


    [webif]
    httpport = 16001
    httpuser = admin
    httppwd = admin
    httprefresh = 15
    httpallowed = 127.0.0.1,192.168.x.x-192.168.255.255


    #
    # dvbapi configuration
    #
    # format:
    #
    # priority:
    # P: CAID[:][provider ID][:][service ID][:][ECM PID] [continue]
    #
    # ignore:
    # I: CAID[:][provider ID][:][service ID][:][ECM PID]
    #
    # wait:
    # D: CAID[:][provider ID][:][service ID][:][ECM PID] delay
    #
    # map:
    # M: CAID[:][provider ID][:][service ID][:][ECM PID] target CAID[:][target provider ID]
    #
    # lenght:
    # L: CAID[:][provider ID][:][service ID][:][ECM PID] length
    #


    P: 0963:000000 1 # prioritise CAID 0100 with provider 123456


    #P: :000000 # prioritise ECM with provider ID 1234 on
    # on any CAID and service


    #P: 0100 # prioritise CAID 0200


    #P: 0300::9ABC # prioritise CAID 0300 on service 9ABC only


    #M: 0400 0500:123456 # map CAID 0400 to provider ID 123456 with
    # CAID 0500


    #D: 0600 200 # wait 200 ms before writing CW for CAID 0600


    #I: :654321 # ignore provider ID 654321 for every CAID and
    # service


    #I: 0 # ignore every CAID that was not handled before


    #L: 0700 8e # ECM length for CAID 0700 to 8e (hexadecimal)






    [reader]
    label = slot0
    description = Freesat
    protocol = internal
    device = /dev/sci0
    services = ***_uk
    showcls = 0
    caid = 0963
    detect = cd
    mhz = 500
    cardmhz = 357
    ident = 0963:000000
    group = 1
    emmcache = 1,3,15
    blockemm-unknown = 1
    lb_weight = 101


    [account]
    user = admin
    pwd = admin
    group = 1
    hostname = 127.0.0.1
    au = slot0


    im not sure what is wrong do i need the provider file the tiers and services the srv i thought all i needed was oscam config/server/user or is there a more stable oscam ie a later 1 thanks. also i forgot this monitor]
    port = 988
    nocrypt = 127.0.0.1,192.168.x.x-192.168.255.255 should this port be 16001 and is that ip addy

  • i want to use oscam on its own

    can some1 tell me how to do it im useing oscam


    Unix starttime: 1322164008
    Starttime: 24.11.11 19:46:48
    Version: 1.00-unstable_svn Rev. 5350
    Max PID: unlimited


    with cccam 213 but i want to keep my cccam peers im useing db500hd with nemisis


    these are miy files


    [global]
    logfile = oscam
    clienttimeout = 3750
    fallbacktimeout = 1500
    cachedelay = 120
    nice = -1
    maxlogsize = 20
    waitforcards = 0
    preferlocalcards = 1
    saveinithistory = 1


    [cccam]
    port = 12000
    version = 2.2.1



    [dvbapi]
    enabled = 1
    au = 1
    boxtype = dreambox
    user =
    request_mode = 0



    [webif]
    httpport = 16002
    #httpuser =
    #httppwd =
    httprefresh = 10
    httpallowed = 127.0.0.1,192.168..-192.168.255.255




    [reader]
    label = freesat
    enable = 1
    protocol = internal
    device = /dev/sci0
    detect = cd
    mhz = 500
    cardmhz = 357
    group = 1
    caid = 0963
    ident = 0963:000000
    emmcache = 1,3,2
    ecmcache = 1
    blockemm-unknown = 1
    blockemm-s=0
    blockemm-u=0
    blockemm-g = 1
    ccckeepalive = 1




    [account]
    user =
    pwd =
    group = 1
    au = freesat
    cccmaxhops = 1
    cccreshare = 1
    numusers = 1
    penalty = 1






    i want to use oscam and get rid of cccam as i said my files are ere what am i doing wrong thanks

  • digialb

    can some1 tell me the ident of digi is it 0b00 or 0622 some1 tells me he as canal digital card 2 but i only see 0100 and 0622 but on her it shows 0b00 im looking for the caid/srv tryed to ask him but no reply could it be 256 trick thanks