i'm not the author of this story so go to the openpli forum and ask them ...
Or you can download from the nightly builds (RC 9.0) : ( https://openpli.org/download/ )
;
I've just put the latest nightly build rc 9 in multiboot on my solo 4k and the normal channels versions do not clear. I then installed a modified channel list with icam and using ncam the stream relay channels clear. So as per the threads above i think there is more that needs doing.
Clearing most channels on 12418 H Wh, Coral, Laddies. Just longstanding keys found on a search.
Loaded up that transponder and a number of channels clearing 👌
Is it just the one channel that clears on 4.8e? i download a set of keys tonight and the one channel that clears.
sky discovery de working fine as others have had said.
Just update my Qviart dual 4k to 7.4. The upgrade seem to hang around 75% but a reboot and a check in the info showed that the image had installed. Installed levi45 addon manager and download vhannable icam motor list and the latest oscam. Insert server lines and everything is working great. This image for the short period i have test it seems fast. Boot times see great. I've just to test it goes into standby ok. All is good. Good work team.
Correct,because ATV 7.4 Devel is only a test Image for ATV 7.3 and you can only update this via Online Update,not with Online Flash.
Please don´t forget,you must have ATV 7.3 to acitvate the last ATV 7.4 Devel Image,ATV 7.2 don´t have the last Updates becauce out of life.
Thank you for that i did read a number of posts on here and i believed that you could update from 7.2, it looks like i am mistaken and i will sort that problem out later. I shall go to 7.3 and go again. Thank you for your reply.
I have just installed openatv 7.2 in slot 2 on the Qviart Dual. Telneted into the box and ran the line of code to upgrade as shown below.
wget -O - -q https://feeds2.mynonpublic.com/devel-feed | bash
Everything looks to install correctly and then i have rebooted the box and then gone into the software manager and tried to flash online but the option of 7.4 is not in the feed. Are there any other options.
Do viark and gtmedia use same server
Similar viark use forever and gtmedia use mars.
i have enable dual, online in 30min
I will try and test this weekend. Thank you.
Do you need anyone with a Qviart dual to test any images for you?
Any chance of releasing an image for the Qviart Dual i believe they use the same chipset.
IPTV is only 5 seconds behind the streaming compared to satellite
Normally iptv is some minutes behind the live satellite feeds.
With it being iptv its not a signal issues. Have you tried your provider on another source like a phone to see if it still happens? Could be that is a bad provider and nothing you can do about it.
Is there a guide with instructions for updating a GT Media 8X8 with Mars server?
Are you looking for the premium channels as at one time they only opened on one type of gtmedia box and it was not the one you have. Things may had changed recently though.
To scan the satellite on openatv image it's menu, set up, reception, manual scan, type of scan toggle to single satellite them drop to satellite and toggle left or right to change satellite, drop down to network scan select yes and then green button to scan
So your dish is pointing at 0.8w or you have a dish with multiple lnbs?
You would need to go into the menu and then tuner settings and change the satellite you wish to scam under manual scan. You could also just download channel list which has already been done. That is menu, plugins green button to download plugins. Go into settings. This mean channel list. You do not say if you have a motorised dish or not but you can download loads of different channel list in there. Just choose one that mentions 0,8w. After you have done this reboot the box and then press the ok button on the remote and up. Then there should be a colour button along the button that says reception or satellites or extended. Usually yellow or green button. This allows you to change satellites to the one you want. This should then load the full channel list for you of 0,8w.
Hi sorry to but in can you change the audio on syk it moves etc
Yes just like you can on E2 receivers.
I sent the dish around to 13e and took a few photos of some of the channels In the sky it list
La qualità video di SKY*it è con parabola o IPTV?
con parabola satellitare.
skyit full or only few channels
A lot of channels I believe more like sky de. It's not a package I use a lot.
